lkml.org 
[lkml]   [2020]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] PCI: hv: Retry PCI bus D0 entry when the first attempt failed with invalid device state
Date
In the case of kdump, the PCI device was not cleanly shut down
before the kdump kernel starts. This causes the initial
attempt of entering D0 state in the kdump kernel to fail with
invalid device state returned from Hyper-V host.
When this happens, explicitly call PCI bus exit and retry to
enter the D0 state.

Signed-off-by: Wei Hu <weh@microsoft.com>
---
v2: Incorporate review comments from Michael Kelley, Dexuan Cui and
Bjorn Helgaas

drivers/pci/controller/pci-hyperv.c | 40 +++++++++++++++++++++++++++--
1 file changed, 38 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index e6fac0187722..92092a47d3af 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -2739,6 +2739,8 @@ static void hv_free_config_window(struct hv_pcibus_device *hbus)
vmbus_free_mmio(hbus->mem_config->start, PCI_CONFIG_MMIO_LENGTH);
}

+static int hv_pci_bus_exit(struct hv_device *hdev, bool keep_devs);
+
/**
* hv_pci_enter_d0() - Bring the "bus" into the D0 power state
* @hdev: VMBus's tracking struct for this root PCI bus
@@ -2751,8 +2753,10 @@ static int hv_pci_enter_d0(struct hv_device *hdev)
struct pci_bus_d0_entry *d0_entry;
struct hv_pci_compl comp_pkt;
struct pci_packet *pkt;
+ bool retry = true;
int ret;

+enter_d0_retry:
/*
* Tell the host that the bus is ready to use, and moved into the
* powered-on state. This includes telling the host which region
@@ -2779,6 +2783,38 @@ static int hv_pci_enter_d0(struct hv_device *hdev)
if (ret)
goto exit;

+ /*
+ * In certain case (Kdump) the pci device of interest was
+ * not cleanly shut down and resource is still held on host
+ * side, the host could return invalid device status.
+ * We need to explicitly request host to release the resource
+ * and try to enter D0 again.
+ */
+ if (comp_pkt.completion_status < 0 && retry) {
+ retry = false;
+
+ dev_err(&hdev->device, "Retrying D0 Entry\n");
+
+ /*
+ * Hv_pci_bus_exit() calls hv_send_resource_released()
+ * to free up resources of its child devices.
+ * In the kdump kernel we need to set the
+ * wslot_res_allocated to 255 so it scans all child
+ * devices to release resources allocated in the
+ * normal kernel before panic happened.
+ */
+ hbus->wslot_res_allocated = 255;
+
+ ret = hv_pci_bus_exit(hdev, true);
+
+ if (ret == 0) {
+ kfree(pkt);
+ goto enter_d0_retry;
+ }
+ dev_err(&hdev->device,
+ "Retrying D0 failed with ret %d\n", ret);
+ }
+
if (comp_pkt.completion_status < 0) {
dev_err(&hdev->device,
"PCI Pass-through VSP failed D0 Entry with status %x\n",
@@ -3185,7 +3221,7 @@ static int hv_pci_probe(struct hv_device *hdev,
return ret;
}

-static int hv_pci_bus_exit(struct hv_device *hdev, bool hibernating)
+static int hv_pci_bus_exit(struct hv_device *hdev, bool keep_devs)
{
struct hv_pcibus_device *hbus = hv_get_drvdata(hdev);
struct {
@@ -3203,7 +3239,7 @@ static int hv_pci_bus_exit(struct hv_device *hdev, bool hibernating)
if (hdev->channel->rescind)
return 0;

- if (!hibernating) {
+ if (!keep_devs) {
/* Delete any children which might still exist. */
dr = kzalloc(sizeof(*dr), GFP_KERNEL);
if (dr && hv_pci_start_relations_work(hbus, dr))
--
2.20.1
\
 
 \ /
  Last update: 2020-05-01 07:39    [W:0.064 / U:1.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site