Messages in this thread | | | Subject | Re: [PATCH 0/5] soc: ti: add k3 platforms chipid module driver | From | santosh.shilimkar@oracle ... | Date | Fri, 1 May 2020 14:25:17 -0700 |
| |
On 5/1/20 1:55 PM, Grygorii Strashko wrote: > Hi Santosh, Tero > > On 23/04/2020 21:05, Grygorii Strashko wrote: >> Hi All, >> >> This series introduces TI K3 Multicore SoC platforms chipid module driver >> which provides identification support of the TI K3 SoCs (family, >> revision) >> and register this information with the SoC bus. It is available under >> /sys/devices/soc0/ for user space, and can be checked, where needed, >> in Kernel using soc_device_match(). >> It is also required for introducing support for new revisions of >> K3 AM65x/J721E SoCs. >> >> Example J721E: >> # cat /sys/devices/soc0/{machine,family,revision} >> Texas Instruments K3 J721E SoC >> J721E >> SR1.0 >> >> Example AM65x: >> # cat /sys/devices/soc0/{machine,family,revision} >> Texas Instruments AM654 Base Board >> AM65X >> SR1.0 >> >> Grygorii Strashko (5): >> dt-bindings: soc: ti: add binding for k3 platforms chipid module >> soc: ti: add k3 platforms chipid module driver >> arm64: arch_k3: enable chipid driver >> arm64: dts: ti: k3-am65-wakeup: add k3 platforms chipid module node >> arm64: dts: ti: k3-j721e-mcu-wakeup: add k3 platforms chipid module >> node >> >> .../bindings/soc/ti/k3-socinfo.yaml | 40 ++++++ >> arch/arm64/Kconfig.platforms | 1 + >> arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 5 + >> .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 5 + >> drivers/soc/ti/Kconfig | 10 ++ >> drivers/soc/ti/Makefile | 1 + >> drivers/soc/ti/k3-socinfo.c | 135 ++++++++++++++++++ >> 7 files changed, 197 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml >> create mode 100644 drivers/soc/ti/k3-socinfo.c >> > > Any more comments? I'm going resend it. > If you have acks from DT maintainers, then I suggest you to split this series and post platform and drivers patches separately.
Regards, Santosh
| |