lkml.org 
[lkml]   [2020]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/4] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's
On Wed, Apr 08, 2020 at 02:14:02PM -0400, Al Cooper wrote:
> v3 - Addressed all of Andy Shevchenko's review comments for
> ehci-brcm.c.
> - Fixed the brcm,bcm7445-ehci.yaml dt-bindings document,
> dt_binding_check now passes.
> - Added the XHCI functionality to xhci-plat.c instead of creating
> new brcmstb files, as suggested by Mathias Nyman.

It's nice, but have you heard what Mathias asked / proposed?

> v2 - Addressed Andy Shevchenko's review comments.
> - Fixed dt_binding_check error pointed out by Rob Herring.
> - Removed pr_info message in ehci_brcm_init as suggested by
> Greg Kroah-Hartman.
>
> This adds support for the XHCI, EHCI and OHCI host controllers found
> in Broadcom STB SoC's. These drivers depend on getting access to the
> new Broadcom STB USB PHY driver through a device-tree phandle and
> will fail if the driver is not available.
>
> Al Cooper (4):
> dt-bindings: Add Broadcom STB USB support
> usb: xhci: xhci-plat: Add support for Broadcom STB SoC's
> usb: ehci: Add new EHCI driver for Broadcom STB SoC's
> usb: host: Add ability to build new Broadcom STB USB drivers
>
> .../bindings/usb/brcm,bcm7445-ehci.yaml | 60 ++++
> .../devicetree/bindings/usb/usb-xhci.txt | 1 +
> MAINTAINERS | 8 +
> drivers/usb/host/Kconfig | 16 +
> drivers/usb/host/Makefile | 16 +-
> drivers/usb/host/ehci-brcm.c | 286 ++++++++++++++++++
> drivers/usb/host/xhci-plat.c | 10 +
> 7 files changed, 391 insertions(+), 6 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
> create mode 100644 drivers/usb/host/ehci-brcm.c
>
> --
> 2.17.1
>

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2020-04-08 20:26    [W:0.130 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site