lkml.org 
[lkml]   [2020]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [RFC PATCH 17/34] iommu/arm-smmu: Store device instead of group in arm_smmu_s2cr
From
Date
On 2020-04-07 7:37 pm, Joerg Roedel wrote:
> From: Joerg Roedel <jroedel@suse.de>
>
> This is required to convert the arm-smmu driver to the
> probe/release_device() interface.
>
> Signed-off-by: Joerg Roedel <jroedel@suse.de>
> ---
> drivers/iommu/arm-smmu.c | 14 +++++++++-----
> 1 file changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
> index a6a5796e9c41..3493501d8b2c 100644
> --- a/drivers/iommu/arm-smmu.c
> +++ b/drivers/iommu/arm-smmu.c
> @@ -69,7 +69,7 @@ MODULE_PARM_DESC(disable_bypass,
> "Disable bypass streams such that incoming transactions from devices that are not attached to an iommu domain will report an abort back to the device and will not be allowed to pass through the SMMU.");
>
> struct arm_smmu_s2cr {
> - struct iommu_group *group;
> + struct device *dev;
> int count;
> enum arm_smmu_s2cr_type type;
> enum arm_smmu_s2cr_privcfg privcfg;
> @@ -1100,7 +1100,7 @@ static int arm_smmu_master_alloc_smes(struct device *dev)
> /* It worked! Now, poke the actual hardware */
> for_each_cfg_sme(cfg, fwspec, i, idx) {
> arm_smmu_write_sme(smmu, idx);
> - smmu->s2crs[idx].group = group;
> + smmu->s2crs[idx].dev = dev;
> }
>
> mutex_unlock(&smmu->stream_map_mutex);
> @@ -1495,11 +1495,15 @@ static struct iommu_group *arm_smmu_device_group(struct device *dev)
> int i, idx;
>
> for_each_cfg_sme(cfg, fwspec, i, idx) {
> - if (group && smmu->s2crs[idx].group &&
> - group != smmu->s2crs[idx].group)
> + struct iommu_group *idx_grp = NULL;
> +
> + if (smmu->s2crs[idx].dev)
> + idx_grp = smmu->s2crs[idx].dev->iommu_group;

For a hot-pluggable bus where logical devices may share Stream IDs (like
fsl-mc), this could happen:

create device A
iommu_probe_device(A)
iommu_device_group(A) -> alloc group X
create device B
iommu_probe_device(B)
iommu_device_group(A) -> lookup returns group X
...
iommu_remove_device(A)
delete device A
create device C
iommu_probe_device(C)
iommu_device_group(C) -> use-after-free of A

Preserving the logical behaviour here would probably look *something*
like the mangled diff below, but I haven't thought it through 100%.

Robin.

----->8-----
diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index 16c4b87af42b..e88612ee47fe 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -1100,10 +1100,8 @@ static int arm_smmu_master_alloc_smes(struct
device *dev)
iommu_group_put(group);

/* It worked! Now, poke the actual hardware */
- for_each_cfg_sme(fwspec, i, idx) {
+ for_each_cfg_sme(fwspec, i, idx)
arm_smmu_write_sme(smmu, idx);
- smmu->s2crs[idx].group = group;
- }

mutex_unlock(&smmu->stream_map_mutex);
return 0;
@@ -1500,15 +1498,17 @@ static struct iommu_group
*arm_smmu_device_group(struct device *dev)
}

if (group)
- return iommu_group_ref_get(group);
-
- if (dev_is_pci(dev))
+ iommu_group_ref_get(group);
+ else if (dev_is_pci(dev))
group = pci_device_group(dev);
else if (dev_is_fsl_mc(dev))
group = fsl_mc_device_group(dev);
else
group = generic_device_group(dev);

+ for_each_cfg_sme(fwspec, i, idx)
+ smmu->s2crs[idx].group = group;
+
return group;
}
\
 
 \ /
  Last update: 2020-04-08 14:10    [W:0.196 / U:0.752 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site