lkml.org 
[lkml]   [2020]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 28/34] iommu/renesas: Convert to probe/release_device() call-backs
Date
From: Joerg Roedel <jroedel@suse.de>

Convert the Renesas IOMMU driver to use the probe_device() and
release_device() call-backs of iommu_ops, so that the iommu core code
does the group and sysfs setup.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
drivers/iommu/ipmmu-vmsa.c | 60 +++++++++++++-------------------------
1 file changed, 20 insertions(+), 40 deletions(-)

diff --git a/drivers/iommu/ipmmu-vmsa.c b/drivers/iommu/ipmmu-vmsa.c
index 310cf09feea3..fb7e702dee23 100644
--- a/drivers/iommu/ipmmu-vmsa.c
+++ b/drivers/iommu/ipmmu-vmsa.c
@@ -805,24 +805,8 @@ static int ipmmu_of_xlate(struct device *dev,
static int ipmmu_init_arm_mapping(struct device *dev)
{
struct ipmmu_vmsa_device *mmu = to_ipmmu(dev);
- struct iommu_group *group;
int ret;

- /* Create a device group and add the device to it. */
- group = iommu_group_alloc();
- if (IS_ERR(group)) {
- dev_err(dev, "Failed to allocate IOMMU group\n");
- return PTR_ERR(group);
- }
-
- ret = iommu_group_add_device(group, dev);
- iommu_group_put(group);
-
- if (ret < 0) {
- dev_err(dev, "Failed to add device to IPMMU group\n");
- return ret;
- }
-
/*
* Create the ARM mapping, used by the ARM DMA mapping core to allocate
* VAs. This will allocate a corresponding IOMMU domain.
@@ -856,48 +840,39 @@ static int ipmmu_init_arm_mapping(struct device *dev)
return 0;

error:
- iommu_group_remove_device(dev);
if (mmu->mapping)
arm_iommu_release_mapping(mmu->mapping);

return ret;
}

-static int ipmmu_add_device(struct device *dev)
+static struct iommu_device *ipmmu_probe_device(struct device *dev)
{
struct ipmmu_vmsa_device *mmu = to_ipmmu(dev);
- struct iommu_group *group;
- int ret;

/*
* Only let through devices that have been verified in xlate()
*/
if (!mmu)
- return -ENODEV;
+ return ERR_PTR(-ENODEV);

- if (IS_ENABLED(CONFIG_ARM) && !IS_ENABLED(CONFIG_IOMMU_DMA)) {
- ret = ipmmu_init_arm_mapping(dev);
- if (ret)
- return ret;
- } else {
- group = iommu_group_get_for_dev(dev);
- if (IS_ERR(group))
- return PTR_ERR(group);
+ return &mmu->iommu;
+}

- iommu_group_put(group);
- }
+static void ipmmu_probe_finalize(struct device *dev)
+{
+ int ret = 0;

- iommu_device_link(&mmu->iommu, dev);
- return 0;
+ if (IS_ENABLED(CONFIG_ARM) && !IS_ENABLED(CONFIG_IOMMU_DMA))
+ ret = ipmmu_init_arm_mapping(dev);
+
+ if (ret)
+ dev_err(dev, "Can't create IOMMU mapping - DMA-OPS will not work\n");
}

-static void ipmmu_remove_device(struct device *dev)
+static void ipmmu_release_device(struct device *dev)
{
- struct ipmmu_vmsa_device *mmu = to_ipmmu(dev);
-
- iommu_device_unlink(&mmu->iommu, dev);
arm_iommu_detach_device(dev);
- iommu_group_remove_device(dev);
}

static struct iommu_group *ipmmu_find_group(struct device *dev)
@@ -925,9 +900,14 @@ static const struct iommu_ops ipmmu_ops = {
.flush_iotlb_all = ipmmu_flush_iotlb_all,
.iotlb_sync = ipmmu_iotlb_sync,
.iova_to_phys = ipmmu_iova_to_phys,
- .add_device = ipmmu_add_device,
- .remove_device = ipmmu_remove_device,
+ .probe_device = ipmmu_probe_device,
+ .release_device = ipmmu_release_device,
+ .probe_finalize = ipmmu_probe_finalize,
+#if defined(CONFIG_ARM) && !defined(CONFIG_IOMMU_DMA)
+ .device_group = generic_device_group,
+#else
.device_group = ipmmu_find_group,
+#endif
.pgsize_bitmap = SZ_1G | SZ_2M | SZ_4K,
.of_xlate = ipmmu_of_xlate,
};
--
2.17.1
\
 
 \ /
  Last update: 2020-04-07 20:39    [W:0.174 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site