lkml.org 
[lkml]   [2020]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 2/2] tty: samsung_tty: 32-bit access for TX/RX hold registers
On Tue, Apr 07, 2020 at 06:49:29AM +0200, Jiri Slaby wrote:
> On 07. 04. 20, 1:08, Hyunki Koo wrote:
> > Support 32-bit access for the TX/RX hold registers UTXH and URXH.
> >
> > This is required for some newer SoCs.
> >
> > Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>
> ...
> > ---
> > drivers/tty/serial/samsung_tty.c | 76 +++++++++++++++++++++++++++++++++-------
> > 1 file changed, 64 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
> > index 73f951d65b93..bdf1d4d12cb1 100644
> > --- a/drivers/tty/serial/samsung_tty.c
> > +++ b/drivers/tty/serial/samsung_tty.c
> > @@ -154,12 +154,47 @@ struct s3c24xx_uart_port {
> ...
> > -#define wr_regb(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
> > +static void wr_reg(struct uart_port *port, u32 reg, u32 val)
> > +{
> > + switch (port->iotype) {
> > + case UPIO_MEM:
> > + writeb_relaxed(val, portaddr(port, reg));
> > + break;
> > + case UPIO_MEM32:
> > + writel_relaxed(val, portaddr(port, reg));
> > + break;
> > + }
> > +}
> > +
> > #define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
> >
> > +static void wr_reg_barrier(struct uart_port *port, u32 reg, u32 val)
>
> You need to explain, why you need this _barrier variant now. This change
> should be done in a separate patch too.

There is no functional change in regard of barrier. The ordered IO was
used there before.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2020-04-07 08:25    [W:0.069 / U:0.884 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site