lkml.org 
[lkml]   [2020]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 1/5] media: dt-bindings: media: i2c: Deprecate usage of the clock-frequency property
Hi Laurent,

Thank you for the review.

On Mon, Apr 6, 2020 at 6:30 PM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Prabhakar,
>
> Thank you for the patch.
>
> On Mon, Apr 06, 2020 at 05:42:37PM +0100, Lad Prabhakar wrote:
> > OV5645 sensor supports input clock frequency ranging from 6MHz to 27MHz
> > but the driver strictly expects this to be 24MHz (with tolerance of 1%)
> > with this restrictions let the driver enforce the clock frequency
>
> Maybe s/with/With/ ?
>
OK will fix it next version.

Cheers,
--Prabhakar

> > internally to 24MHz rather then being passed as dt-property.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> > ---
> > Documentation/devicetree/bindings/media/i2c/ov5645.txt | 2 --
> > 1 file changed, 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
> > index 72ad992f77be..a55bb728ea48 100644
> > --- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt
> > +++ b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
> > @@ -8,7 +8,6 @@ Required Properties:
> > - compatible: Value should be "ovti,ov5645".
> > - clocks: Reference to the xclk clock.
> > - clock-names: Should be "xclk".
> > -- clock-frequency: Frequency of the xclk clock.
> > - enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
> > to the hardware pin PWDNB which is physically active low.
> > - reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to
> > @@ -37,7 +36,6 @@ Example:
> >
> > clocks = <&clks 200>;
> > clock-names = "xclk";
> > - clock-frequency = <24000000>;
> >
> > vdddo-supply = <&camera_dovdd_1v8>;
> > vdda-supply = <&camera_avdd_2v8>;
>
> --
> Regards,
>
> Laurent Pinchart

\
 
 \ /
  Last update: 2020-04-07 09:37    [W:0.060 / U:1.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site