lkml.org 
[lkml]   [2020]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] phy: qualcomm: usb-hs-28nm: Prepare clocks in init
Date
The AHB clock must be on for qcom_snps_hsphy_init() to be able to write
the initialization sequence to the hardware, so move the clock
enablement to phy init and exit.

Fixes: 67b27dbeac4d ("phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c | 32 ++++++++++++++-------
1 file changed, 21 insertions(+), 11 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c b/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
index d998e65c89c8..a52a9bf13b75 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
@@ -160,18 +160,11 @@ static int qcom_snps_hsphy_power_on(struct phy *phy)
ret = regulator_bulk_enable(VREG_NUM, priv->vregs);
if (ret)
return ret;
- ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
- if (ret)
- goto err_disable_regulator;
+
qcom_snps_hsphy_disable_hv_interrupts(priv);
qcom_snps_hsphy_exit_retention(priv);

return 0;
-
-err_disable_regulator:
- regulator_bulk_disable(VREG_NUM, priv->vregs);
-
- return ret;
}

static int qcom_snps_hsphy_power_off(struct phy *phy)
@@ -180,7 +173,6 @@ static int qcom_snps_hsphy_power_off(struct phy *phy)

qcom_snps_hsphy_enter_retention(priv);
qcom_snps_hsphy_enable_hv_interrupts(priv);
- clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
regulator_bulk_disable(VREG_NUM, priv->vregs);

return 0;
@@ -266,21 +258,39 @@ static int qcom_snps_hsphy_init(struct phy *phy)
struct hsphy_priv *priv = phy_get_drvdata(phy);
int ret;

- ret = qcom_snps_hsphy_reset(priv);
+ ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
if (ret)
return ret;

+ ret = qcom_snps_hsphy_reset(priv);
+ if (ret)
+ goto disable_clocks;
+
qcom_snps_hsphy_init_sequence(priv);

ret = qcom_snps_hsphy_por_reset(priv);
if (ret)
- return ret;
+ goto disable_clocks;
+
+ return 0;
+
+disable_clocks:
+ clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+ return ret;
+}
+
+static int qcom_snps_hsphy_exit(struct phy *phy)
+{
+ struct hsphy_priv *priv = phy_get_drvdata(phy);
+
+ clk_bulk_disable_unprepare(priv->num_clks, priv->clks);

return 0;
}

static const struct phy_ops qcom_snps_hsphy_ops = {
.init = qcom_snps_hsphy_init,
+ .exit = qcom_snps_hsphy_exit,
.power_on = qcom_snps_hsphy_power_on,
.power_off = qcom_snps_hsphy_power_off,
.set_mode = qcom_snps_hsphy_set_mode,
--
2.24.0
\
 
 \ /
  Last update: 2020-04-08 03:29    [W:0.065 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site