[lkml]   [2020]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v3 0/2] Enable SS/HS USB support on SM8150
Add required device tree nodes to enable the USB SS and HS
paths on the primary USB controller on SM8150. In addition,
implement missing resources from the SM8150 GCC driver, which
includes the USB GDSC and the USB PIPE clocks.

Changes in v3:
- Set dr_mode to "peripheral" on the SM8150 MTP DTSI file.

Changes in v2:
- Combine GDSC and USB PIPE clock changes.
- Re-order DTS nodes based on address

Jack Pham (1):
arm64: dts: qcom: sm8150: Add USB and PHY device nodes

Wesley Cheng (1):
clk: qcom: gcc: Add USB3 PIPE clock and GDSC for SM8150

arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 21 +++++++
arch/arm64/boot/dts/qcom/sm8150.dtsi | 92 +++++++++++++++++++++++++++++
drivers/clk/qcom/gcc-sm8150.c | 52 ++++++++++++++++
include/dt-bindings/clock/qcom,gcc-sm8150.h | 4 ++
4 files changed, 169 insertions(+)

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

 \ /
  Last update: 2020-04-08 00:25    [W:0.060 / U:3.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site