lkml.org 
[lkml]   [2020]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/4] phy: qcom-qmp: Add SM8150 QMP USB3 PHY support
Date
From: Jack Pham <jackp@codeaurora.org>

Add support for SM8150 QMP USB3 PHY with the necessary
initialization sequences as well as additional QMP V4
register definitions.

Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 153 ++++++++++++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 198 +++++++++++++++++++++++++++++++++++-
2 files changed, 349 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 7db2a94..cc04471 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -160,6 +160,12 @@ enum qphy_reg_layout {
[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
};

+static const unsigned int qmp_v4_usb3phy_regs_layout[] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+};
+
static const unsigned int sdm845_ufsphy_regs_layout[] = {
[QPHY_START_CTRL] = 0x00,
[QPHY_PCS_READY_STATUS] = 0x160,
@@ -972,6 +978,115 @@ enum qphy_reg_layout {
QMP_PHY_INIT_CFG(QPHY_V4_MULTI_LANE_CTRL1, 0x02),
};

+static const struct qmp_phy_init_tbl sm8150_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x20),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x94),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_pcs_tbl[] = {
+ /* Lock Det settings */
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
+
/* struct qmp_phy_cfg - per-PHY initialization config */
struct qmp_phy_cfg {
/* phy-type - PCIE/UFS/USB */
@@ -1126,6 +1241,10 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
"aux", "cfg_ahb", "ref", "com_aux",
};

+static const char * const qmp_v4_phy_clk_l[] = {
+ "aux", "ref_clk_src", "ref", "com_aux",
+};
+
static const char * const sdm845_ufs_phy_clk_l[] = {
"ref", "ref_aux",
};
@@ -1392,6 +1511,37 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
.is_dual_lane_phy = true,
};

+static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
+ .tx_tbl = sm8150_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_tx_tbl),
+ .rx_tbl = sm8150_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_rx_tbl),
+ .pcs_tbl = sm8150_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
static void qcom_qmp_phy_configure(void __iomem *base,
const unsigned int *regs,
const struct qmp_phy_init_tbl tbl[],
@@ -2117,6 +2267,9 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
}, {
.compatible = "qcom,sm8150-qmp-ufs-phy",
.data = &sm8150_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sm8150-qmp-usb3-phy",
+ .data = &sm8150_usb3phy_cfg,
},
{ },
};
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 90f793c..22c9009 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -125,7 +125,7 @@
#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1DC
#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1E0

-/* Only for QMP V3 PHY - DP COM registers */
+/* Only for QMP V3 & V4 PHY - DP COM registers */
#define QPHY_V3_DP_COM_PHY_MODE_CTRL 0x00
#define QPHY_V3_DP_COM_SW_RESET 0x04
#define QPHY_V3_DP_COM_POWER_DOWN_CTRL 0x08
@@ -314,6 +314,14 @@
#define QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG5 0x60

/* Only for QMP V4 PHY - QSERDES COM registers */
+#define QSERDES_V4_COM_SSC_EN_CENTER 0x010
+#define QSERDES_V4_COM_SSC_PER1 0x01c
+#define QSERDES_V4_COM_SSC_PER2 0x020
+#define QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0 0x024
+#define QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0 0x028
+#define QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1 0x030
+#define QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1 0x034
+#define QSERDES_V4_COM_SYSCLK_BUF_ENABLE 0x050
#define QSERDES_V4_COM_PLL_IVCO 0x058
#define QSERDES_V4_COM_CMN_IPTRIM 0x060
#define QSERDES_V4_COM_CP_CTRL_MODE0 0x074
@@ -330,10 +338,22 @@
#define QSERDES_V4_COM_DEC_START_MODE0 0x0bc
#define QSERDES_V4_COM_LOCK_CMP2_MODE1 0x0b8
#define QSERDES_V4_COM_DEC_START_MODE1 0x0c4
+#define QSERDES_V4_COM_DIV_FRAC_START1_MODE0 0x0cc
+#define QSERDES_V4_COM_DIV_FRAC_START2_MODE0 0x0d0
+#define QSERDES_V4_COM_DIV_FRAC_START3_MODE0 0x0d4
+#define QSERDES_V4_COM_DIV_FRAC_START1_MODE1 0x0d8
+#define QSERDES_V4_COM_DIV_FRAC_START2_MODE1 0x0dc
+#define QSERDES_V4_COM_DIV_FRAC_START3_MODE1 0x0e0
#define QSERDES_V4_COM_VCO_TUNE_MAP 0x10c
+#define QSERDES_V4_COM_VCO_TUNE1_MODE0 0x110
+#define QSERDES_V4_COM_VCO_TUNE2_MODE0 0x114
+#define QSERDES_V4_COM_VCO_TUNE1_MODE1 0x118
+#define QSERDES_V4_COM_VCO_TUNE2_MODE1 0x11c
#define QSERDES_V4_COM_VCO_TUNE_INITVAL2 0x124
#define QSERDES_V4_COM_HSCLK_SEL 0x158
#define QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL 0x15c
+#define QSERDES_V4_COM_CORECLK_DIV_MODE1 0x16c
+#define QSERDES_V4_COM_SVS_MODE_CLK_SEL 0x184
#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0 0x1ac
#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0 0x1b0
#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1 0x1b4
@@ -341,12 +361,16 @@
#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1 0x1b8

/* Only for QMP V4 PHY - TX registers */
+#define QSERDES_V4_TX_RES_CODE_LANE_TX 0x34
+#define QSERDES_V4_TX_RES_CODE_LANE_RX 0x38
#define QSERDES_V4_TX_LANE_MODE_1 0x84
+#define QSERDES_V4_TX_RCV_DETECT_LVL_2 0x9c
#define QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1 0xd8
#define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1 0xdC
#define QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1 0xe0
#define QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1 0xe4
#define QSERDES_V4_TX_TRAN_DRVR_EMP_EN 0xb8
+#define QSERDES_V4_TX_PI_QEC_CTRL 0x104

/* Only for QMP V4 PHY - RX registers */
#define QSERDES_V4_RX_UCDR_FO_GAIN 0x008
@@ -354,17 +378,27 @@
#define QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN 0x030
#define QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE 0x034
#define QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW 0x03c
+#define QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH 0x040
#define QSERDES_V4_RX_UCDR_PI_CONTROLS 0x044
#define QSERDES_V4_RX_UCDR_PI_CTRL2 0x048
+#define QSERDES_V4_RX_UCDR_SB2_THRESH1 0x04c
+#define QSERDES_V4_RX_UCDR_SB2_THRESH2 0x050
+#define QSERDES_V4_RX_UCDR_SB2_GAIN1 0x054
+#define QSERDES_V4_RX_UCDR_SB2_GAIN2 0x058
+#define QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE 0x060
#define QSERDES_V4_RX_AC_JTAG_ENABLE 0x068
#define QSERDES_V4_RX_AC_JTAG_MODE 0x078
#define QSERDES_V4_RX_RX_TERM_BW 0x080
+#define QSERDES_V4_RX_VGA_CAL_CNTRL1 0x0d4
+#define QSERDES_V4_RX_VGA_CAL_CNTRL2 0x0d8
+#define QSERDES_V4_RX_GM_CAL 0x0dc
#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2 0x0ec
#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3 0x0f0
#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4 0x0f4
#define QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW 0x0f8
#define QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH 0x0fc
#define QSERDES_V4_RX_RX_IDAC_MEASURE_TIME 0x100
+#define QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x110
#define QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2 0x114
#define QSERDES_V4_RX_SIGDET_CNTRL 0x11c
#define QSERDES_V4_RX_SIGDET_LVL 0x120
@@ -385,9 +419,12 @@
#define QSERDES_V4_RX_RX_MODE_10_HIGH2 0x1a0
#define QSERDES_V4_RX_RX_MODE_10_HIGH3 0x1a4
#define QSERDES_V4_RX_RX_MODE_10_HIGH4 0x1a8
+#define QSERDES_V4_RX_DFE_EN_TIMER 0x1b4
+#define QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET 0x1b8
#define QSERDES_V4_RX_DCC_CTRL1 0x1bc
+#define QSERDES_V4_RX_VTH_CODE 0x1c4

-/* Only for QMP V4 PHY - PCS registers */
+/* Only for QMP V4 PHY - UFS PCS registers */
#define QPHY_V4_PHY_START 0x000
#define QPHY_V4_POWER_DOWN_CONTROL 0x004
#define QPHY_V4_SW_RESET 0x008
@@ -409,4 +446,161 @@
#define QPHY_V4_TX_MID_TERM_CTRL1 0x1d8
#define QPHY_V4_MULTI_LANE_CTRL1 0x1e0

+/* Only for QMP V4 PHY - USB/PCIe PCS registers */
+#define QPHY_V4_PCS_SW_RESET 0x000
+#define QPHY_V4_PCS_REVISION_ID0 0x004
+#define QPHY_V4_PCS_REVISION_ID1 0x008
+#define QPHY_V4_PCS_REVISION_ID2 0x00c
+#define QPHY_V4_PCS_REVISION_ID3 0x010
+#define QPHY_V4_PCS_PCS_STATUS1 0x014
+#define QPHY_V4_PCS_PCS_STATUS2 0x018
+#define QPHY_V4_PCS_PCS_STATUS3 0x01c
+#define QPHY_V4_PCS_PCS_STATUS4 0x020
+#define QPHY_V4_PCS_PCS_STATUS5 0x024
+#define QPHY_V4_PCS_PCS_STATUS6 0x028
+#define QPHY_V4_PCS_PCS_STATUS7 0x02c
+#define QPHY_V4_PCS_DEBUG_BUS_0_STATUS 0x030
+#define QPHY_V4_PCS_DEBUG_BUS_1_STATUS 0x034
+#define QPHY_V4_PCS_DEBUG_BUS_2_STATUS 0x038
+#define QPHY_V4_PCS_DEBUG_BUS_3_STATUS 0x03c
+#define QPHY_V4_PCS_POWER_DOWN_CONTROL 0x040
+#define QPHY_V4_PCS_START_CONTROL 0x044
+#define QPHY_V4_PCS_INSIG_SW_CTRL1 0x048
+#define QPHY_V4_PCS_INSIG_SW_CTRL2 0x04c
+#define QPHY_V4_PCS_INSIG_SW_CTRL3 0x050
+#define QPHY_V4_PCS_INSIG_SW_CTRL4 0x054
+#define QPHY_V4_PCS_INSIG_SW_CTRL5 0x058
+#define QPHY_V4_PCS_INSIG_SW_CTRL6 0x05c
+#define QPHY_V4_PCS_INSIG_SW_CTRL7 0x060
+#define QPHY_V4_PCS_INSIG_SW_CTRL8 0x064
+#define QPHY_V4_PCS_INSIG_MX_CTRL1 0x068
+#define QPHY_V4_PCS_INSIG_MX_CTRL2 0x06c
+#define QPHY_V4_PCS_INSIG_MX_CTRL3 0x070
+#define QPHY_V4_PCS_INSIG_MX_CTRL4 0x074
+#define QPHY_V4_PCS_INSIG_MX_CTRL5 0x078
+#define QPHY_V4_PCS_INSIG_MX_CTRL7 0x07c
+#define QPHY_V4_PCS_INSIG_MX_CTRL8 0x080
+#define QPHY_V4_PCS_OUTSIG_SW_CTRL1 0x084
+#define QPHY_V4_PCS_OUTSIG_MX_CTRL1 0x088
+#define QPHY_V4_PCS_CLAMP_ENABLE 0x08c
+#define QPHY_V4_PCS_POWER_STATE_CONFIG1 0x090
+#define QPHY_V4_PCS_POWER_STATE_CONFIG2 0x094
+#define QPHY_V4_PCS_FLL_CNTRL1 0x098
+#define QPHY_V4_PCS_FLL_CNTRL2 0x09c
+#define QPHY_V4_PCS_FLL_CNT_VAL_L 0x0a0
+#define QPHY_V4_PCS_FLL_CNT_VAL_H_TOL 0x0a4
+#define QPHY_V4_PCS_FLL_MAN_CODE 0x0a8
+#define QPHY_V4_PCS_TEST_CONTROL1 0x0ac
+#define QPHY_V4_PCS_TEST_CONTROL2 0x0b0
+#define QPHY_V4_PCS_TEST_CONTROL3 0x0b4
+#define QPHY_V4_PCS_TEST_CONTROL4 0x0b8
+#define QPHY_V4_PCS_TEST_CONTROL5 0x0bc
+#define QPHY_V4_PCS_TEST_CONTROL6 0x0c0
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG1 0x0c4
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG2 0x0c8
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG3 0x0cc
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG4 0x0d0
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG5 0x0d4
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG6 0x0d8
+#define QPHY_V4_PCS_REFGEN_REQ_CONFIG1 0x0dc
+#define QPHY_V4_PCS_REFGEN_REQ_CONFIG2 0x0e0
+#define QPHY_V4_PCS_REFGEN_REQ_CONFIG3 0x0e4
+#define QPHY_V4_PCS_BIST_CTRL 0x0e8
+#define QPHY_V4_PCS_PRBS_POLY0 0x0ec
+#define QPHY_V4_PCS_PRBS_POLY1 0x0f0
+#define QPHY_V4_PCS_FIXED_PAT0 0x0f4
+#define QPHY_V4_PCS_FIXED_PAT1 0x0f8
+#define QPHY_V4_PCS_FIXED_PAT2 0x0fc
+#define QPHY_V4_PCS_FIXED_PAT3 0x100
+#define QPHY_V4_PCS_FIXED_PAT4 0x104
+#define QPHY_V4_PCS_FIXED_PAT5 0x108
+#define QPHY_V4_PCS_FIXED_PAT6 0x10c
+#define QPHY_V4_PCS_FIXED_PAT7 0x110
+#define QPHY_V4_PCS_FIXED_PAT8 0x114
+#define QPHY_V4_PCS_FIXED_PAT9 0x118
+#define QPHY_V4_PCS_FIXED_PAT10 0x11c
+#define QPHY_V4_PCS_FIXED_PAT11 0x120
+#define QPHY_V4_PCS_FIXED_PAT12 0x124
+#define QPHY_V4_PCS_FIXED_PAT13 0x128
+#define QPHY_V4_PCS_FIXED_PAT14 0x12c
+#define QPHY_V4_PCS_FIXED_PAT15 0x130
+#define QPHY_V4_PCS_TXMGN_CONFIG 0x134
+#define QPHY_V4_PCS_G12S1_TXMGN_V0 0x138
+#define QPHY_V4_PCS_G12S1_TXMGN_V1 0x13c
+#define QPHY_V4_PCS_G12S1_TXMGN_V2 0x140
+#define QPHY_V4_PCS_G12S1_TXMGN_V3 0x144
+#define QPHY_V4_PCS_G12S1_TXMGN_V4 0x148
+#define QPHY_V4_PCS_G12S1_TXMGN_V0_RS 0x14c
+#define QPHY_V4_PCS_G12S1_TXMGN_V1_RS 0x150
+#define QPHY_V4_PCS_G12S1_TXMGN_V2_RS 0x154
+#define QPHY_V4_PCS_G12S1_TXMGN_V3_RS 0x158
+#define QPHY_V4_PCS_G12S1_TXMGN_V4_RS 0x15c
+#define QPHY_V4_PCS_G3S2_TXMGN_MAIN 0x160
+#define QPHY_V4_PCS_G3S2_TXMGN_MAIN_RS 0x164
+#define QPHY_V4_PCS_G12S1_TXDEEMPH_M6DB 0x168
+#define QPHY_V4_PCS_G12S1_TXDEEMPH_M3P5DB 0x16c
+#define QPHY_V4_PCS_G3S2_PRE_GAIN 0x170
+#define QPHY_V4_PCS_G3S2_POST_GAIN 0x174
+#define QPHY_V4_PCS_G3S2_PRE_POST_OFFSET 0x178
+#define QPHY_V4_PCS_G3S2_PRE_GAIN_RS 0x17c
+#define QPHY_V4_PCS_G3S2_POST_GAIN_RS 0x180
+#define QPHY_V4_PCS_G3S2_PRE_POST_OFFSET_RS 0x184
+#define QPHY_V4_PCS_RX_SIGDET_LVL 0x188
+#define QPHY_V4_PCS_RX_SIGDET_DTCT_CNTRL 0x18c
+#define QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L 0x190
+#define QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H 0x194
+#define QPHY_V4_PCS_RATE_SLEW_CNTRL1 0x198
+#define QPHY_V4_PCS_RATE_SLEW_CNTRL2 0x19c
+#define QPHY_V4_PCS_PWRUP_RESET_DLY_TIME_AUXCLK 0x1a0
+#define QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L 0x1a4
+#define QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_H 0x1a8
+#define QPHY_V4_PCS_TSYNC_RSYNC_TIME 0x1ac
+#define QPHY_V4_PCS_CDR_RESET_TIME 0x1b0
+#define QPHY_V4_PCS_TSYNC_DLY_TIME 0x1b4
+#define QPHY_V4_PCS_ELECIDLE_DLY_SEL 0x1b8
+#define QPHY_V4_PCS_CMN_ACK_OUT_SEL 0x1bc
+#define QPHY_V4_PCS_ALIGN_DETECT_CONFIG1 0x1c0
+#define QPHY_V4_PCS_ALIGN_DETECT_CONFIG2 0x1c4
+#define QPHY_V4_PCS_ALIGN_DETECT_CONFIG3 0x1c8
+#define QPHY_V4_PCS_ALIGN_DETECT_CONFIG4 0x1cc
+#define QPHY_V4_PCS_PCS_TX_RX_CONFIG 0x1d0
+#define QPHY_V4_PCS_RX_IDLE_DTCT_CNTRL 0x1d4
+#define QPHY_V4_PCS_RX_DCC_CAL_CONFIG 0x1d8
+#define QPHY_V4_PCS_EQ_CONFIG1 0x1dc
+#define QPHY_V4_PCS_EQ_CONFIG2 0x1e0
+#define QPHY_V4_PCS_EQ_CONFIG3 0x1e4
+#define QPHY_V4_PCS_EQ_CONFIG4 0x1e8
+#define QPHY_V4_PCS_EQ_CONFIG5 0x1ec
+#define QPHY_V4_PCS_USB3_POWER_STATE_CONFIG1 0x300
+#define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_STATUS 0x304
+#define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_CTRL 0x308
+#define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_CTRL2 0x30c
+#define QPHY_V4_PCS_USB3_LFPS_RXTERM_IRQ_SOURCE_STATUS 0x310
+#define QPHY_V4_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR 0x314
+#define QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x318
+#define QPHY_V4_PCS_USB3_LFPS_TX_ECSTART 0x31c
+#define QPHY_V4_PCS_USB3_LFPS_PER_TIMER_VAL 0x320
+#define QPHY_V4_PCS_USB3_LFPS_TX_END_CNT_U3_START 0x324
+#define QPHY_V4_PCS_USB3_RXEQTRAINING_LOCK_TIME 0x328
+#define QPHY_V4_PCS_USB3_RXEQTRAINING_WAIT_TIME 0x32c
+#define QPHY_V4_PCS_USB3_RXEQTRAINING_CTLE_TIME 0x330
+#define QPHY_V4_PCS_USB3_RXEQTRAINING_WAIT_TIME_S2 0x334
+#define QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x338
+#define QPHY_V4_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x33c
+#define QPHY_V4_PCS_USB3_RCVR_DTCT_DLY_U3_H 0x340
+#define QPHY_V4_PCS_USB3_ARCVR_DTCT_EN_PERIOD 0x344
+#define QPHY_V4_PCS_USB3_ARCVR_DTCT_CM_DLY 0x348
+#define QPHY_V4_PCS_USB3_TXONESZEROS_RUN_LENGTH 0x34c
+#define QPHY_V4_PCS_USB3_ALFPS_DEGLITCH_VAL 0x350
+#define QPHY_V4_PCS_USB3_SIGDET_STARTUP_TIMER_VAL 0x354
+#define QPHY_V4_PCS_USB3_TEST_CONTROL 0x358
+
+/* Only for QMP V4 PHY - PCS_MISC registers */
+#define QPHY_V4_PCS_MISC_TYPEC_CTRL 0x00
+#define QPHY_V4_PCS_MISC_TYPEC_PWRDN_CTRL 0x04
+#define QPHY_V4_PCS_MISC_PCS_MISC_CONFIG1 0x08
+#define QPHY_V4_PCS_MISC_CLAMP_ENABLE 0x0c
+#define QPHY_V4_PCS_MISC_TYPEC_STATUS 0x10
+#define QPHY_V4_PCS_MISC_PLACEHOLDER_STATUS 0x14
+
#endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2020-04-08 00:25    [W:0.098 / U:4.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site