lkml.org 
[lkml]   [2020]   [Apr]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] Input: rotary-encoder-counter: add DT bindings
Date
Add dt binding for the counter variant of the rotary encoder driver.

Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
---
.../input/rotary-encoder-counter.yaml | 67 +++++++++++++++++++
1 file changed, 67 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/rotary-encoder-counter.yaml

diff --git a/Documentation/devicetree/bindings/input/rotary-encoder-counter.yaml b/Documentation/devicetree/bindings/input/rotary-encoder-counter.yaml
new file mode 100644
index 000000000000..a59f7c1faf0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/rotary-encoder-counter.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/rotary-encoder-counter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rotary Encoder Counter
+
+maintainers:
+ - Kamel Bouhara <kamel.bouhara@bootlin.com>
+
+description:
+ Registers a Rotary encoder connected through a counter device.
+
+properties:
+ compatible:
+ const: rotary-encoder-counter
+
+ counter:
+ description: Phandle for the counter device providing rotary position.
+
+ linux-axis:
+ description: The input subsystem axis to map to this rotary encoder.
+ type: boolean
+
+ qdec-mode:
+ description: |
+ Quadrature decoder function to set in the counter device.
+ 3: x1-PHA
+ 4: x1-PHB
+ 5: x2-PHA
+ 6: x2-PHB
+ 7: x4-PHA and PHB
+
+ steps:
+ description: Number of steps in a full turnaround of the encoder.
+ Only relevant for absolute axis. Defaults to 24 which is a typical
+ value for such devices.
+
+ relative-axis:
+ description: Register a relative axis rather than an absolute one.
+ type: boolean
+
+ rollover:
+ description: Automatic rollover when the rotary value becomes greater
+ than the specified steps or smaller than 0. For absolute axis only.
+ type: boolean
+
+ poll-interval:
+ description: Poll interval at which the position is read from the counter
+ device (default 500ms).
+
+required:
+ - compatible
+ - counter
+ - qdec-mode
+
+examples:
+ - |
+ rotary@0 {
+ compatible = "rotary-encoder-counter";
+
+ counter =<&qdec>;
+ qdec-mode = <7>;
+ relative-axis;
+ };
+...
--
2.25.0
\
 
 \ /
  Last update: 2020-04-06 17:59    [W:0.161 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site