lkml.org 
[lkml]   [2020]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] mtd: Fix mtd not the same name not registered if nvmem
Hi

On Mon, Apr 27, 2020 at 9:10 PM Boris Brezillon
<boris.brezillon@collabora.com> wrote:
>
> On Mon, 27 Apr 2020 16:49:22 +0200
> Miquel Raynal <miquel.raynal@bootlin.com> wrote:
>
> > Hi Boris,
> >
> > Boris Brezillon <boris.brezillon@collabora.com> wrote on Mon, 27 Apr
> > 2020 16:37:11 +0200:
> >
> > > On Mon, 27 Apr 2020 16:22:22 +0200
> > > Miquel Raynal <miquel.raynal@bootlin.com> wrote:
> > >
> > > > Hi Ricardo,
> > > >
> > > > Ricardo Ribalda Delgado <ribalda@kernel.org> wrote on Tue, 14 Apr 2020
> > > > 15:47:23 +0200:
> > > >
> > > > > Ping?
> > > > >
> > > > > On Thu, Apr 2, 2020 at 8:59 AM Ricardo Ribalda Delgado
> > > > > <ribalda@kernel.org> wrote:
> > > > > >
> > > > > > When the nvmem framework is enabled, a nvmem device is created per mtd
> > > > > > device/partition.
> > > > > >
> > > > > > It is not uncommon that a device can have multiple mtd devices with
> > > > > > partitions that have the same name. Eg, when there DT overlay is allowed
> > > > > > and the same device with mtd is attached twice.
> > > > > >
> > > > > > Under that circumstances, the mtd fails to register due to a name
> > > > > > duplication on the nvmem framework.
> > > > > >
> > > > > > With this patch we add a _1, _2, _X to the subsequent names if there is
> > > > > > a collition, and throw a warning, instead of not starting the mtd
> > > > > > device.
> > > > > >
> > > > > > [ 8.948991] sysfs: cannot create duplicate filename '/bus/nvmem/devices/Production Data'
> > > > > > [ 8.948992] CPU: 7 PID: 246 Comm: systemd-udevd Not tainted 5.5.0-qtec-standard #13
> > > > > > [ 8.948993] Hardware name: AMD Dibbler/Dibbler, BIOS 05.22.04.0019 10/26/2019
> > > > > > [ 8.948994] Call Trace:
> > > > > > [ 8.948996] dump_stack+0x50/0x70
> > > > > > [ 8.948998] sysfs_warn_dup.cold+0x17/0x2d
> > > > > > [ 8.949000] sysfs_do_create_link_sd.isra.0+0xc2/0xd0
> > > > > > [ 8.949002] bus_add_device+0x74/0x140
> > > > > > [ 8.949004] device_add+0x34b/0x850
> > > > > > [ 8.949006] nvmem_register.part.0+0x1bf/0x640
> > > > > > ...
> > > > > > [ 8.948926] mtd mtd8: Failed to register NVMEM device
> > > > > >
> > > > > > Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
> > > >
> > > > Thanks for proposing this change. Indeed we are aware of the problem
> > > > and the best solution that we could come up with was to create an
> > > > additional "unique_name" field to the mtd_info structure. This new
> > > > field would have the form:
> > > >
> > > > [<parent-unique-name><separator>]<mtd-name>
> > > >
> > > > The separator might be '~' (but I am completely open on that), and that
> > > > would give for instance:
> > > >
> > > > my-controller~my-device~my-part~mysub-part
> > >
> > > I'd prefer something slightly more standard for the separator, like '/',
> > > which is what we usually use when we want to represent a path in a tree.
> > > I do agree on the general approach though.
> >
> > I am not sure / is a valid separator here we would use this
> > name to create a sysfs entry. Would it work?
>
> Hm, you're probably right, I didn't check how the name was used by
> nvmem. I also see that partition names can contain spaces, which is
> not that great. So, if we want to use mtd->unique_name we should
> probably sanitize it before passing it to nvmem. All this makes me
> reconsider your initial proposal: use 'mtdX' as the nvmem name. It's
> unique and it's simple enough to not require this extra sanitization
> pass, on the other hand, guessing the nvmem partition based on such an
> opaque name is not simple, not to mention that the mtd device name can
> change depending on the probe order.
>
> I also wonder if creating nvmem devs unconditionally for all mtd
> devices is a good idea. Sounds like we should only do that if there's an
> explicit request to have one partition exposed as an nvmem.
>
> Note that, no matter what we decide about nvmem, I think having unique
> names at the MTD level is a good thing.

I have no preference one way or another.

The issue is that our current master leads to mtds not working fine
and making the system unusable. Whatever we decide it must be fast and
the patch backported.

My original patch follows the same logic as led does where there is a
duplicated name. I can send a separate patch that uses mtdX and then
you decide what to pick. Or we can go with a third way, but it needs
to be soon ;)

Best regards!

\
 
 \ /
  Last update: 2020-04-30 14:28    [W:0.053 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site