lkml.org 
[lkml]   [2020]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v6 1/2] PCI: xilinx-cpm: Add device tree binding for Versal CPM Root Port
Date
> On Fri, Apr 24, 2020 at 05:34:03PM +0530, Bharat Kumar Gogada wrote:
> > Add device tree binding documentation for Versal CPM Root Port driver.
> >
> > Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
> > ---
> > .../devicetree/bindings/pci/xilinx-versal-cpm.txt | 68
> > ++++++++++++++++++++++
> > 1 file changed, 68 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/pci/xilinx-versal-cpm.txt
>
> DT bindings need to Cc DT list to be reviewed. Bindings are now in DT schema
> format. See Documentation/devicetree/writing-schema.rst.
>
> Sorry to tell you this on v6, but first I'm seeing it.


Hi Rob,

Thanks for the inputs, will fix this and send with schema format.

Regards,
Bharat

>
> >
> > diff --git
> > a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.txt
> > b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.txt
> > new file mode 100644
> > index 0000000..eac6144
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.txt
> > @@ -0,0 +1,68 @@
> > +* Xilinx Versal CPM DMA Root Port Bridge DT description
> > +
> > +Required properties:
> > +- #address-cells: Address representation for root ports, set to <3>
> > +- #size-cells: Size representation for root ports, set to <2>
> > +- #interrupt-cells: specifies the number of cells needed to encode an
> > + interrupt source. The value must be 1.
> > +- compatible: Should contain "xlnx,versal-cpm-host-1.00"
> > +- reg: Should contain configuration space (includes bridge registers) and
> > + CPM system level control and status registers, and length
> > +- reg-names: Must include the following entries:
> > + "cfg": configuration space region and bridge registers
> > + "cpm_slcr": CPM system level control and status registers
> > +- interrupts: Should contain AXI PCIe interrupt
> > +- interrupt-map-mask,
> > + interrupt-map: standard PCI properties to define the mapping of the
> > + PCI interface to interrupt numbers.
> > +- bus-range: Range of bus numbers associated with this controller
> > +- ranges: ranges for the PCI memory regions (I/O space region is not
> > + supported by hardware)
> > + Please refer to the standard PCI bus binding document for a more
> > + detailed explanation
> > +- msi-map: Maps a Requester ID to an MSI controller and associated MSI
> > + sideband data
> > +- interrupt-names: Must include the following entries:
> > + "misc": interrupt asserted when legacy or error interrupt is
> > +received
>
> Don't really need a name when only 1.
>
> > +
> > +Interrupt controller child node
> > ++++++++++++++++++++++++++++++++
> > +Required properties:
> > +- interrupt-controller: identifies the node as an interrupt
> > +controller
> > +- #address-cells: specifies the number of cells needed to encode an
> > + address. The value must be 0.
> > +- #interrupt-cells: specifies the number of cells needed to encode an
> > + interrupt source. The value must be 1.
> > +
> > +
> > +Refer to the following binding document for more detailed description
> > +on the use of 'msi-map':
> > + Documentation/devicetree/bindings/pci/pci-msi.txt
> > +
> > +Example:
> > + pci@fca10000 {
>
> Unit address is normally the first entry.
>
> > + #address-cells = <3>;
> > + #interrupt-cells = <1>;
> > + #size-cells = <2>;
> > + compatible = "xlnx,versal-cpm-host-1.00";
> > + interrupt-map = <0 0 0 1 &pcie_intc_0 0>,
> > + <0 0 0 2 &pcie_intc_0 1>,
> > + <0 0 0 3 &pcie_intc_0 2>,
> > + <0 0 0 4 &pcie_intc_0 3>;
> > + interrupt-map-mask = <0 0 0 7>;
> > + interrupt-parent = <&gic>;
> > + interrupt-names = "misc";
> > + interrupts = <0 72 4>;
> > + bus-range = <0x00 0xff>;
> > + ranges = <0x02000000 0x00000000 0xE0000000 0x0
> 0xE0000000
> > +0x00000000 0x10000000>,
>
> lowercase hex please.
>
> > + <0x43000000 0x00000080 0x00000000 0x00000080
> 0x00000000 0x00000000 0x80000000>;
> > + msi-map = <0x0 &its_gic 0x0 0x10000>;
> > + reg = <0x6 0x00000000 0x0 0x10000000>,
> > + <0x0 0xFCA10000 0x0 0x1000>;
> > + reg-names = "cfg", "cpm_slcr";
> > + pcie_intc_0: pci-interrupt-controller {
>
> interrupt-controller {
>
> > + #address-cells = <0>;
> > + #interrupt-cells = <1>;
> > + interrupt-controller ;
> > + };
> > + };
> > --
> > 2.7.4
> >

\
 
 \ /
  Last update: 2020-04-30 09:12    [W:0.151 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site