lkml.org 
[lkml]   [2020]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] usb: serial: xr_serial: Add gpiochip support
Hi Greg,

On Wed, Apr 29, 2020 at 01:26:51AM +0530, mani@kernel.org wrote:
> From: Manivannan Sadhasivam <mani@kernel.org>
>
> Add gpiochip support for Maxlinear/Exar USB to serial converter
> for controlling the available gpios.
>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: linux-gpio@vger.kernel.org
> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
> ---
> drivers/usb/serial/xr_serial.c | 186 ++++++++++++++++++++++++++++++++-
> drivers/usb/serial/xr_serial.h | 7 ++
> 2 files changed, 192 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/serial/xr_serial.c b/drivers/usb/serial/xr_serial.c
> index ea4a0b167d3f..d86fd40839f8 100644
> --- a/drivers/usb/serial/xr_serial.c
> +++ b/drivers/usb/serial/xr_serial.c
> @@ -476,6 +476,189 @@ static void xr_break_ctl(struct tty_struct *tty, int break_state)
> state);
> }
>
> +#ifdef CONFIG_GPIOLIB
> +

[...]

> +
> +static int xr_gpio_init(struct usb_serial_port *port)
> +{
> + struct xr_port_private *port_priv = usb_get_serial_port_data(port);
> + int ret = 0;
> +
> + if (port_priv->idProduct == XR21V141X_ID)
> + ret = xr21v141x_gpio_init(port);
> +
> + if (ret < 0)
> + return ret;
> +
> + port_priv->gc.label = "xr_gpios";
> + port_priv->gc.request = xr_gpio_request;
> + port_priv->gc.get_direction = xr_gpio_direction_get;
> + port_priv->gc.direction_input = xr_gpio_direction_input;
> + port_priv->gc.direction_output = xr_gpio_direction_output;
> + port_priv->gc.get = xr_gpio_get;
> + port_priv->gc.set = xr_gpio_set;
> + port_priv->gc.owner = THIS_MODULE;
> + port_priv->gc.parent = &port->dev;
> + port_priv->gc.base = -1;
> + port_priv->gc.can_sleep = true;
> +
> + ret = gpiochip_add_data(&port_priv->gc, port);
> + if (!ret)
> + port_priv->gpio_registered = true;
> +
> + return ret;
> +}
> +
> +static void xr_gpio_remove(struct usb_serial_port *port)
> +{
> + struct xr_port_private *port_priv = usb_get_serial_port_data(port);
> +
> + if (port_priv->gpio_registered) {
> + gpiochip_remove(&port_priv->gc);
> + port_priv->gpio_registered = false;
> + }
> +}
> +
> +#else
> +
> +static int xr_gpio_init(struct usb_serial_port *port)
> +{
> + return 0;
> +}
> +
> +static void xr_gpio_remove(struct usb_serial_port *port)
> +{
> + /* Nothing to do */
> +}
> +
> +#endif
> +
> static int xr_port_probe(struct usb_serial_port *port)
> {
> struct usb_serial *serial = port->serial;
> @@ -495,13 +678,14 @@ static int xr_port_probe(struct usb_serial_port *port)
>
> usb_set_serial_port_data(port, port_priv);
>
> - return 0;
> + return xr_gpio_init(port);

Just realised that the gpiochip is registered for 2 interfaces exposed by
this chip. This is due to the fact that this chip presents CDC-ACM model,
so there are 2 interfaces (interrupt and bulk IN/OUT).

We shouldn't need gpiochip for interface 0. So what is the recommended way
to filter that?

Thanks,
Mani

> }
>
> static int xr_port_remove(struct usb_serial_port *port)
> {
> struct xr_port_private *port_priv = usb_get_serial_port_data(port);
>
> + xr_gpio_remove(port);
> kfree(port_priv);
>
> return 0;
> diff --git a/drivers/usb/serial/xr_serial.h b/drivers/usb/serial/xr_serial.h
> index d2977ef847a0..079098cf553a 100644
> --- a/drivers/usb/serial/xr_serial.h
> +++ b/drivers/usb/serial/xr_serial.h
> @@ -3,6 +3,8 @@
> #ifndef __LINUX_USB_SERIAL_XR_SERIAL_H
> #define __LINUX_USB_SERIAL_XR_SERIAL_H
>
> +#include <linux/gpio/driver.h>
> +
> struct xr_uart_regs {
> u8 enable;
> u8 format;
> @@ -21,6 +23,11 @@ struct xr_uart_regs {
> };
>
> struct xr_port_private {
> +#ifdef CONFIG_GPIOLIB
> + struct gpio_chip gc;
> + bool gpio_registered;
> + u8 gpio_altfunc;
> +#endif
> const struct xr_uart_regs *regs;
> u16 idProduct;
> u8 reg_width;
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2020-04-29 19:48    [W:0.084 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site