lkml.org 
[lkml]   [2020]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 00/75] x86: SEV-ES Guest Support
Date
Hi,

here is the next version of changes to enable Linux to run as an SEV-ES
guest. The code was rebased to v5.7-rc3 and got a fair number of changes
since the last version.

What is SEV-ES
==============

SEV-ES is an acronym for 'Secure Encrypted Virtualization - Encrypted
State' and means a hardware feature of AMD processors which hides the
register state of VCPUs to the hypervisor by encrypting it. The
hypervisor can't read or make changes to the guests register state.

Most intercepts set by the hypervisor do not cause a #VMEXIT of the
guest anymore, but turn into a VMM Communication Exception (#VC
exception, vector 29) inside the guest. The error-code of this exception
is the intercept exit-code that caused the exception. The guest handles
the #VC exception by communicating with the hypervisor through a shared
data structure, the 'Guest-Hypervisor-Communication-Block'.

With SEV-ES an untrusted hypervisor can no longer steal secrets from a
guest via inspecting guest memory or guest register contents. A
malicious hypervisor can still interfere with guest operations, but the
SEV-ES client code does its best to detect such situations and crash the
VM if it happens.

More information about the implementation details can be found in the
cover letter of the initial post of these patches:

https://lore.kernel.org/lkml/20200211135256.24617-1-joro@8bytes.org/

Current State of the Patches
============================

The patches posted here are considered feature complete and survived a
good amount of functional testing:

1) Booting an SEV-ES guest VM to the graphical desktop.

2) Running a 16-vcpu SEV-ES VM with 'perf top' and the x86
selftests shipped with the kernel source in a loop in
parallel for 18 hours showed no issues.

3) Various compile testing has been done, including
allno/allmod/allyes/defconfig for x86-64 and i386.

4) Compiled every single commit (single .config only) to check
if they build and do not introduce new warnings.

5) Boot-tested the changes on various machines, including
bare-metal on an AMD (with and without mem_encrypt=on) and
Intel machine.

A git-tree with these patches applied can be found here:

https://git.kernel.org/pub/scm/linux/kernel/git/joro/linux.git/log/?h=sev-es-client-v5.7-rc3

Changes to the previous version
===============================

Here is an incomplete list of changes to the previous version of this
patch-set. There have been so many small changes that I havn't kept
track of all, but the most important ones are listed:


- Rebased to v5.7-rc3

- Changes the #VC exception handler to use an IST stack. This
includes a couple of additional patches to set up and map the
IST stack, to make dumpstack aware of them and to fix a race
with the NMI handler when shifting the #VC handlers IST entry.

- The NMI_Complete message to the hypervisor the re-open the NMI
window is now sent at the very beginning of do_nmi().

- The GHCB used in the pre-decompression code is now re-mapped
encrypted and flushed from the cache before jumping to the
decompressed kernel image. This is needed to make sure the
running kernel can safely re-use the page. Actually the page
is also unmapped after being re-encrypted to catch any
use-after-remap.

- Added CPUID caching.

- Mapped the GHCBs to the EFI page-tables as the UEFI BIOS
expects to be able to re-use the OS GHCBs.

- RDTSC and RDTSCP are now also handled in the pre-decompression
boot code. These instructions are used by KASLR and some
hypervisors might intercept them.

- Re-implemented nested GHCB handling by keeping a backup GHCB
around. This supports one level of GHCB nesting, which is
sufficient for now.

- Moved all SEV-ES related per-cpu data into
'struct sev_es_runtime_data'. This struct is allocated and
initialized at boot per cpu.

- Correctly set the protocol and ghcb_usage information when
talking to the hypervisor.

The previous version of the patch-set can be found here:

https://lore.kernel.org/lkml/20200319091407.1481-1-joro@8bytes.org/

Please review.


Thanks,

Joerg

Borislav Petkov (1):
KVM: SVM: Use __packed shorthand

Doug Covelli (1):
x86/vmware: Add VMware specific handling for VMMCALL under SEV-ES

Joerg Roedel (53):
KVM: SVM: Add GHCB Accessor functions
x86/traps: Move some definitions to <asm/trap_defs.h>
x86/insn: Make inat-tables.c suitable for pre-decompression code
x86/umip: Factor out instruction fetch
x86/umip: Factor out instruction decoding
x86/insn: Add insn_get_modrm_reg_off()
x86/insn: Add insn_rep_prefix() helper
x86/boot/compressed/64: Disable red-zone usage
x86/boot/compressed/64: Switch to __KERNEL_CS after GDT is loaded
x86/boot/compressed/64: Add IDT Infrastructure
x86/boot/compressed/64: Rename kaslr_64.c to ident_map_64.c
x86/boot/compressed/64: Add page-fault handler
x86/boot/compressed/64: Always switch to own page-table
x86/boot/compressed/64: Don't pre-map memory in KASLR code
x86/boot/compressed/64: Change add_identity_map() to take start and
end
x86/boot/compressed/64: Add stage1 #VC handler
x86/boot/compressed/64: Call set_sev_encryption_mask earlier
x86/boot/compressed/64: Check return value of
kernel_ident_mapping_init()
x86/boot/compressed/64: Add set_page_en/decrypted() helpers
x86/boot/compressed/64: Setup GHCB Based VC Exception handler
x86/boot/compressed/64: Unmap GHCB page before booting the kernel
x86/fpu: Move xgetbv()/xsetbv() into separate header
x86/idt: Move IDT to data segment
x86/idt: Split idt_data setup out of set_intr_gate()
x86/idt: Move two function from k/idt.c to i/a/desc.h
x86/head/64: Install boot GDT
x86/head/64: Reload GDT after switch to virtual addresses
x86/head/64: Load segment registers earlier
x86/head/64: Switch to initial stack earlier
x86/head/64: Build k/head64.c with -fno-stack-protector
x86/head/64: Load IDT earlier
x86/head/64: Move early exception dispatch to C code
x86/sev-es: Add SEV-ES Feature Detection
x86/sev-es: Print SEV-ES info into kernel log
x86/sev-es: Compile early handler code into kernel image
x86/sev-es: Setup early #VC handler
x86/sev-es: Setup GHCB based boot #VC handler
x86/sev-es: Allocate and Map IST stacks for #VC handler
x86/dumpstack/64: Handle #VC exception stacks
x86/sev-es: Shift #VC IST Stack in nmi_enter()/nmi_exit()
x86/sev-es: Wire up existing #VC exit-code handlers
x86/sev-es: Handle instruction fetches from user-space
x86/sev-es: Do not crash on #VC exceptions from user-space
x86/sev-es: Handle MMIO String Instructions
x86/sev-es: Handle #AC Events
x86/sev-es: Handle #DB Events
x86/paravirt: Allow hypervisor specific VMMCALL handling under SEV-ES
x86/realmode: Add SEV-ES specific trampoline entry point
x86/head/64: Setup TSS early for secondary CPUs
x86/head/64: Don't call verify_cpu() on starting APs
x86/head/64: Rename start_cpu0
x86/sev-es: Support CPU offline/online
x86/sev-es: Handle NMI State

Mike Stunes (1):
x86/sev-es: Cache CPUID results for improved performance

Tom Lendacky (19):
KVM: SVM: Add GHCB definitions
x86/cpufeatures: Add SEV-ES CPU feature
x86/sev-es: Add support for handling IOIO exceptions
x86/sev-es: Add CPUID handling to #VC handler
x86/sev-es: Setup per-cpu GHCBs for the runtime handler
x86/sev-es: Add Runtime #VC Exception Handler
x86/sev-es: Handle MMIO events
x86/sev-es: Handle MSR events
x86/sev-es: Handle DR7 read/write events
x86/sev-es: Handle WBINVD Events
x86/sev-es: Handle RDTSC(P) Events
x86/sev-es: Handle RDPMC Events
x86/sev-es: Handle INVD Events
x86/sev-es: Handle MONITOR/MONITORX Events
x86/sev-es: Handle MWAIT/MWAITX Events
x86/sev-es: Handle VMMCALL Events
x86/kvm: Add KVM specific VMMCALL handling under SEV-ES
x86/realmode: Setup AP jump table
x86/efi: Add GHCB mappings when SEV-ES is active

arch/x86/Kconfig | 1 +
arch/x86/boot/Makefile | 2 +-
arch/x86/boot/compressed/Makefile | 9 +-
arch/x86/boot/compressed/head_64.S | 40 +-
arch/x86/boot/compressed/ident_map_64.c | 339 +++++
arch/x86/boot/compressed/idt_64.c | 53 +
arch/x86/boot/compressed/idt_handlers_64.S | 76 ++
arch/x86/boot/compressed/kaslr.c | 36 +-
arch/x86/boot/compressed/kaslr_64.c | 153 ---
arch/x86/boot/compressed/misc.c | 7 +
arch/x86/boot/compressed/misc.h | 45 +-
arch/x86/boot/compressed/sev-es.c | 210 +++
arch/x86/entry/entry_64.S | 4 +
arch/x86/include/asm/cpu.h | 2 +-
arch/x86/include/asm/cpu_entry_area.h | 62 +
arch/x86/include/asm/cpufeatures.h | 1 +
arch/x86/include/asm/desc.h | 30 +
arch/x86/include/asm/desc_defs.h | 10 +
arch/x86/include/asm/fpu/internal.h | 29 +-
arch/x86/include/asm/fpu/xcr.h | 32 +
arch/x86/include/asm/hardirq.h | 14 +
arch/x86/include/asm/insn-eval.h | 6 +
arch/x86/include/asm/mem_encrypt.h | 5 +
arch/x86/include/asm/msr-index.h | 3 +
arch/x86/include/asm/page_64_types.h | 1 +
arch/x86/include/asm/pgtable.h | 2 +-
arch/x86/include/asm/processor.h | 1 +
arch/x86/include/asm/realmode.h | 4 +
arch/x86/include/asm/segment.h | 2 +-
arch/x86/include/asm/setup.h | 1 -
arch/x86/include/asm/sev-es.h | 107 ++
arch/x86/include/asm/stacktrace.h | 4 +
arch/x86/include/asm/svm.h | 115 +-
arch/x86/include/asm/trap_defs.h | 50 +
arch/x86/include/asm/traps.h | 51 +-
arch/x86/include/asm/x86_init.h | 16 +-
arch/x86/include/uapi/asm/svm.h | 11 +
arch/x86/kernel/Makefile | 5 +
arch/x86/kernel/asm-offsets_64.c | 1 +
arch/x86/kernel/cpu/amd.c | 3 +-
arch/x86/kernel/cpu/common.c | 1 +
arch/x86/kernel/cpu/scattered.c | 1 +
arch/x86/kernel/cpu/vmware.c | 50 +-
arch/x86/kernel/dumpstack_64.c | 47 +
arch/x86/kernel/head64.c | 70 +-
arch/x86/kernel/head_32.S | 4 +-
arch/x86/kernel/head_64.S | 176 ++-
arch/x86/kernel/idt.c | 52 +-
arch/x86/kernel/kvm.c | 35 +-
arch/x86/kernel/nmi.c | 8 +
arch/x86/kernel/sev-es-shared.c | 479 +++++++
arch/x86/kernel/sev-es.c | 1428 ++++++++++++++++++++
arch/x86/kernel/smpboot.c | 4 +-
arch/x86/kernel/traps.c | 3 +
arch/x86/kernel/umip.c | 49 +-
arch/x86/lib/insn-eval.c | 130 ++
arch/x86/mm/extable.c | 1 +
arch/x86/mm/mem_encrypt.c | 39 +-
arch/x86/mm/mem_encrypt_identity.c | 3 +
arch/x86/platform/efi/efi_64.c | 10 +
arch/x86/realmode/init.c | 12 +
arch/x86/realmode/rm/header.S | 3 +
arch/x86/realmode/rm/trampoline_64.S | 20 +
arch/x86/tools/gen-insn-attr-x86.awk | 50 +-
tools/arch/x86/tools/gen-insn-attr-x86.awk | 50 +-
65 files changed, 3842 insertions(+), 426 deletions(-)
create mode 100644 arch/x86/boot/compressed/ident_map_64.c
create mode 100644 arch/x86/boot/compressed/idt_64.c
create mode 100644 arch/x86/boot/compressed/idt_handlers_64.S
delete mode 100644 arch/x86/boot/compressed/kaslr_64.c
create mode 100644 arch/x86/boot/compressed/sev-es.c
create mode 100644 arch/x86/include/asm/fpu/xcr.h
create mode 100644 arch/x86/include/asm/sev-es.h
create mode 100644 arch/x86/include/asm/trap_defs.h
create mode 100644 arch/x86/kernel/sev-es-shared.c
create mode 100644 arch/x86/kernel/sev-es.c

--
2.17.1

\
 
 \ /
  Last update: 2020-04-28 17:18    [W:0.473 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site