lkml.org 
[lkml]   [2020]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ath10k: increase rx buffer size to 2048
From
Date


On 04/28/2020 05:01 AM, Kalle Valo wrote:
> Sven Eckelmann <sven@narfation.org> writes:
>
>> On Wednesday, 1 April 2020 09:00:49 CEST Sven Eckelmann wrote:
>>> On Wednesday, 5 February 2020 20:10:43 CEST Linus Lüssing wrote:
>>>> From: Linus Lüssing <ll@simonwunderlich.de>
>>>>
>>>> Before, only frames with a maximum size of 1528 bytes could be
>>>> transmitted between two 802.11s nodes.
>>>>
>>>> For batman-adv for instance, which adds its own header to each frame,
>>>> we typically need an MTU of at least 1532 bytes to be able to transmit
>>>> without fragmentation.
>>>>
>>>> This patch now increases the maxmimum frame size from 1528 to 1656
>>>> bytes.
>>> [...]
>>>
>>> @Kalle, I saw that this patch was marked as deferred [1] but I couldn't find
>>> any mail why it was done so. It seems like this currently creates real world
>>> problems - so would be nice if you could explain shortly what is currently
>>> blocking its acceptance.
>>
>> Ping?
>
> Sorry for the delay, my plan was to first write some documentation about
> different hardware families but haven't managed to do that yet.
>
> My problem with this patch is that I don't know what hardware and
> firmware versions were tested, so it needs analysis before I feel safe
> to apply it. The ath10k hardware families are very different that even
> if a patch works perfectly on one ath10k hardware it could still break
> badly on another one.
>
> What makes me faster to apply ath10k patches is to have comprehensive
> analysis in the commit log. This shows me the patch author has
> considered about all hardware families, not just the one he is testing
> on, and that I don't need to do the analysis myself.

It has been in ath10k-ct for a while, and that has some fairly wide coverage
in OpenWrt, so likely if there were problems we would have seen it already.

I did not make any specific changes to firmware to support this, so upstream
firmware should behave similarly.

Seems like upstream ath10k could really benefit from having some test beds
so you can actually test code on different chips and have confidence
in your changes!

Thanks,
Ben

--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com

\
 
 \ /
  Last update: 2020-04-28 16:27    [W:1.072 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site