lkml.org 
[lkml]   [2020]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] Changes in w1_therm.c and adding w1_therm.h
On Sun, Apr 26, 2020 at 07:20:30PM +0200, Akira shimahara wrote:
> Le dimanche 26 avril 2020 à 19:09 +0200, Greg KH a écrit :
> > On Sun, Apr 26, 2020 at 02:36:52PM +0200, Akira shimahara wrote:
> > > Le dimanche 26 avril 2020 à 09:51 +0200, Greg KH a écrit :
> > > > On Sat, Apr 25, 2020 at 05:31:41PM +0200, Akira Shimahara wrote:
> > > > > From: Akira SHIMAHARA <akira215corp@gmail.com>
> > > > >
> > > > > Patch for enhacement of w1_therm module. Added features :
> > > > > - Bulk read : send one command for all the slaves
> > > > > on the bus to trigger temperature conversion
> > > > > - Optimized conversion time regarding to device resolution
> > > > > - Dedicated sysfs entry for powering read,
> > > > > resolution set/get, eeprom save/restore
> > > > > - Alarms settings and reading
> > > > > - Code optimization to mitigate bus traffic
> > > > > (devices information are stored to avoid
> > > > > interrogating each device every-time)
> > > > >
> > > > > Following sysfs entry are added :
> > > > > - temperature (RO) : return the temperature in 1/1000°
> > > > > - ext_power (RO) : return the power status of the device
> > > > > - resolution (RW) : get or set the device resolution
> > > > > (supported
> > > > > devices)
> > > > > - eeprom (WO) :trigger a save or restore to/from device EEPROM
> > > > > - alarms (RW) : read or write TH and TL in the device RAM
> > > > > - therm_bulk_read (RW) : Attribute at master level to trigger
> > > > > bulk read and to survey the progress of devices
> > > > > conversions
> > > > > - w1_slave has been kept for compatibility
> > > > >
> > > > > Main motivation was to improve temperature reading speed, which
> > > > > depend
> > > > > on resolution settings of devices. The module store the powwer
> > > > > status and
> > > > > the resolution of each device so that during reading operation,
> > > > > no
> > > > > transaction is required on the bus, which improve speed.
> > > > > The hardware status is checked as soon as a new device is
> > > > > detected,
> > > > > when a user change occurred, or when the corresponding sys file
> > > > > is
> > > > > accessed by user.
> > > > >
> > > > > The bulk read allow to trigger convserion of all devices on the
> > > > > bus
> > > > > at
> > > > > the same time. It will apply a strong pull up on the line if at
> > > > > least
> > > > > one device required it. The duration of the pull up is the max
> > > > > time
> > > > > required by a device on the line.
> > > > >
> > > > > Please let me know any feedback you have on this patch.
> > > > >
> > > > > Thanks ahead,
> > > > >
> > > > > Signed-off-by: Akira Shimahara <akira215corp@gmail.com>
> > > > > ---
> > > > > Changes in v2:
> > > > > - Adding documentation in Documentatin/ABI/testing/sysfs-
> > > > > driver-
> > > > > w1_therm
> > > > > - Updating existing documentation in
> > > > > Documentation/w1/slaves/w1_therm.rst
> > > > >
> > > > > drivers/w1/slaves/w1_therm.c | 1406
> > > > > ++++++++++++++++++++++++++--
> > > > > ------
> > > > > drivers/w1/slaves/w1_therm.h | 386 ++++++++++
> > > > > 2 files changed, 1470 insertions(+), 322 deletions(-)
> > > > > create mode 100644 drivers/w1/slaves/w1_therm.h
> > > >
> > > > No documentation files are added here :(
> > > >
> > >
> > > It's in the PATCH 2/2 included in the previous mail. You want me to
> > > merge in one commit ?. I thought it was easier for you to keep a
> > > track
> > > of the v1.
> >
> > What previous mail? I don't see a patch 2/2 here, did you not cc:
> > me?
> >
> > thanks,
> >
> > greg kh
>
> I'm so sorry Greg, I made a mistake. Please find hereby the patch 2/2.
> Let me know if you want me to merge into 1 commit.

No, multiple patches are good.

And the first patch really should be split up into smaller pieces too.
Each patch should only do 1 thing, not lots of things all at once.

Can you do that and send a patch series please?

thanks,

greg k-h

\
 
 \ /
  Last update: 2020-04-28 14:44    [W:0.216 / U:1.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site