lkml.org 
[lkml]   [2020]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 05/15] kbuild: doc: document the new syntax 'userprogs'
Date
Kbuild now supports the syntax 'userprogs' to compile userspace
programs for the same architecture as the kernel.

Insert the section '5 Userspace Program support' to explain it.

I copy-pasted '4 Host Program support' and fixed it up.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
---

Changes in v2: None

Documentation/kbuild/makefiles.rst | 183 +++++++++++++++++++++--------
1 file changed, 135 insertions(+), 48 deletions(-)

diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst
index b80257a03830..234492351031 100644
--- a/Documentation/kbuild/makefiles.rst
+++ b/Documentation/kbuild/makefiles.rst
@@ -29,31 +29,37 @@ This document describes the Linux kernel Makefiles.
--- 4.4 Controlling compiler options for host programs
--- 4.5 When host programs are actually built

- === 5 Kbuild clean infrastructure
-
- === 6 Architecture Makefiles
- --- 6.1 Set variables to tweak the build to the architecture
- --- 6.2 Add prerequisites to archheaders:
- --- 6.3 Add prerequisites to archprepare:
- --- 6.4 List directories to visit when descending
- --- 6.5 Architecture-specific boot images
- --- 6.6 Building non-kbuild targets
- --- 6.7 Commands useful for building a boot image
- --- 6.8 Custom kbuild commands
- --- 6.9 Preprocessing linker scripts
- --- 6.10 Generic header files
- --- 6.11 Post-link pass
-
- === 7 Kbuild syntax for exported headers
- --- 7.1 no-export-headers
- --- 7.2 generic-y
- --- 7.3 generated-y
- --- 7.4 mandatory-y
-
- === 8 Kbuild Variables
- === 9 Makefile language
- === 10 Credits
- === 11 TODO
+ === 5 Userspace Program support
+ --- 5.1 Simple Userspace Program
+ --- 5.2 Composite Userspace Programs
+ --- 5.3 Controlling compiler options for userspace programs
+ --- 5.4 When userspace programs are actually built
+
+ === 6 Kbuild clean infrastructure
+
+ === 7 Architecture Makefiles
+ --- 7.1 Set variables to tweak the build to the architecture
+ --- 7.2 Add prerequisites to archheaders:
+ --- 7.3 Add prerequisites to archprepare:
+ --- 7.4 List directories to visit when descending
+ --- 7.5 Architecture-specific boot images
+ --- 7.6 Building non-kbuild targets
+ --- 7.7 Commands useful for building a boot image
+ --- 7.8 Custom kbuild commands
+ --- 7.9 Preprocessing linker scripts
+ --- 7.10 Generic header files
+ --- 7.11 Post-link pass
+
+ === 8 Kbuild syntax for exported headers
+ --- 8.1 no-export-headers
+ --- 8.2 generic-y
+ --- 8.3 generated-y
+ --- 8.4 mandatory-y
+
+ === 9 Kbuild Variables
+ === 10 Makefile language
+ === 11 Credits
+ === 12 TODO

1 Overview
==========
@@ -732,7 +738,88 @@ Both possibilities are described in the following.
This will tell kbuild to build lxdialog even if not referenced in
any rule.

-5 Kbuild clean infrastructure
+5 Userspace Program support
+===========================
+
+Just like host programs, Kbuild also supports building userspace executables
+for the target architecture (i.e. the same architecture as you are building
+the kernel for).
+
+The syntax is quite similar. The difference is to use "userprogs" instead of
+"hostprogs".
+
+5.1 Simple Userspace Program
+----------------------------
+
+ The following line tells kbuild that the program bpf-direct shall be
+ built for the target architecture.
+
+ Example::
+
+ userprogs := bpf-direct
+
+ Kbuild assumes in the above example that bpf-direct is made from a
+ single C source file named bpf-direct.c located in the same directory
+ as the Makefile.
+
+5.2 Composite Userspace Programs
+--------------------------------
+
+ Userspace programs can be made up based on composite objects.
+ The syntax used to define composite objects for userspace programs is
+ similar to the syntax used for kernel objects.
+ $(<executable>-objs) lists all objects used to link the final
+ executable.
+
+ Example::
+
+ #samples/seccomp/Makefile
+ userprogs := bpf-fancy
+ bpf-fancy-objs := bpf-fancy.o bpf-helper.o
+
+ Objects with extension .o are compiled from the corresponding .c
+ files. In the above example, bpf-fancy.c is compiled to bpf-fancy.o
+ and bpf-helper.c is compiled to bpf-helper.o.
+
+ Finally, the two .o files are linked to the executable, bpf-fancy.
+ Note: The syntax <executable>-y is not permitted for userspace programs.
+
+5.3 Controlling compiler options for userspace programs
+-------------------------------------------------------
+
+ When compiling userspace programs, it is possible to set specific flags.
+ The programs will always be compiled utilising $(CC) passed
+ the options specified in $(KBUILD_USERCFLAGS).
+ To set flags that will take effect for all userspace programs created
+ in that Makefile, use the variable userccflags.
+
+ Example::
+
+ # samples/seccomp/Makefile
+ userccflags += -I usr/include
+
+ To set specific flags for a single file the following construction
+ is used:
+
+ Example::
+
+ bpf-helper-ccflags += -I user/include
+
+ It is also possible to specify additional options to the linker.
+
+ Example::
+
+ # net/bpfilter/Makefile
+ bpfilter_umh-ldflags += -static
+
+ When linking bpfilter_umh, it will be passed the extra option -static.
+
+5.4 When userspace programs are actually built
+----------------------------------------------
+
+ Same as "When host programs are actually built".
+
+6 Kbuild clean infrastructure
=============================

"make clean" deletes most generated files in the obj tree where the kernel
@@ -790,7 +877,7 @@ is not operational at that point.
Note 2: All directories listed in core-y, libs-y, drivers-y and net-y will
be visited during "make clean".

-6 Architecture Makefiles
+7 Architecture Makefiles
========================

The top level Makefile sets up the environment and does the preparation,
@@ -820,7 +907,7 @@ When kbuild executes, the following steps are followed (roughly):
- Preparing initrd images and the like


-6.1 Set variables to tweak the build to the architecture
+7.1 Set variables to tweak the build to the architecture
--------------------------------------------------------

LDFLAGS
@@ -967,7 +1054,7 @@ When kbuild executes, the following steps are followed (roughly):
KBUILD_VMLINUX_LIBS together specify all the object files used to
link vmlinux.

-6.2 Add prerequisites to archheaders
+7.2 Add prerequisites to archheaders
------------------------------------

The archheaders: rule is used to generate header files that
@@ -977,7 +1064,7 @@ When kbuild executes, the following steps are followed (roughly):
architecture itself.


-6.3 Add prerequisites to archprepare
+7.3 Add prerequisites to archprepare
------------------------------------

The archprepare: rule is used to list prerequisites that need to be
@@ -995,7 +1082,7 @@ When kbuild executes, the following steps are followed (roughly):
generating offset header files.


-6.4 List directories to visit when descending
+7.4 List directories to visit when descending
---------------------------------------------

An arch Makefile cooperates with the top Makefile to define variables
@@ -1030,7 +1117,7 @@ When kbuild executes, the following steps are followed (roughly):
drivers-$(CONFIG_OPROFILE) += arch/sparc64/oprofile/


-6.5 Architecture-specific boot images
+7.5 Architecture-specific boot images
-------------------------------------

An arch Makefile specifies goals that take the vmlinux file, compress
@@ -1085,7 +1172,7 @@ When kbuild executes, the following steps are followed (roughly):

When "make" is executed without arguments, bzImage will be built.

-6.6 Building non-kbuild targets
+7.6 Building non-kbuild targets
-------------------------------

extra-y
@@ -1108,7 +1195,7 @@ When kbuild executes, the following steps are followed (roughly):
In this example, extra-y is used to list object files that
shall be built, but shall not be linked as part of built-in.a.

-6.7 Commands useful for building a boot image
+7.7 Commands useful for building a boot image
---------------------------------------------

Kbuild provides a few macros that are useful when building a
@@ -1211,7 +1298,7 @@ When kbuild executes, the following steps are followed (roughly):
targets += $(dtb-y)
DTC_FLAGS ?= -p 1024

-6.8 Custom kbuild commands
+7.8 Custom kbuild commands
--------------------------

When kbuild is executing with KBUILD_VERBOSE=0, then only a shorthand
@@ -1241,7 +1328,7 @@ When kbuild executes, the following steps are followed (roughly):
will be displayed with "make KBUILD_VERBOSE=0".


-6.9 Preprocessing linker scripts
+7.9 Preprocessing linker scripts
--------------------------------

When the vmlinux image is built, the linker script
@@ -1274,7 +1361,7 @@ When kbuild executes, the following steps are followed (roughly):
The kbuild infrastructure for `*lds` files is used in several
architecture-specific files.

-6.10 Generic header files
+7.10 Generic header files
-------------------------

The directory include/asm-generic contains the header files
@@ -1283,7 +1370,7 @@ When kbuild executes, the following steps are followed (roughly):
to list the file in the Kbuild file.
See "7.2 generic-y" for further info on syntax etc.

-6.11 Post-link pass
+7.11 Post-link pass
-------------------

If the file arch/xxx/Makefile.postlink exists, this makefile
@@ -1299,7 +1386,7 @@ When kbuild executes, the following steps are followed (roughly):
For example, powerpc uses this to check relocation sanity of
the linked vmlinux file.

-7 Kbuild syntax for exported headers
+8 Kbuild syntax for exported headers
------------------------------------

The kernel includes a set of headers that is exported to userspace.
@@ -1319,14 +1406,14 @@ A Kbuild file may be defined under arch/<arch>/include/uapi/asm/ and
arch/<arch>/include/asm/ to list asm files coming from asm-generic.
See subsequent chapter for the syntax of the Kbuild file.

-7.1 no-export-headers
+8.1 no-export-headers
---------------------

no-export-headers is essentially used by include/uapi/linux/Kbuild to
avoid exporting specific headers (e.g. kvm.h) on architectures that do
not support it. It should be avoided as much as possible.

-7.2 generic-y
+8.2 generic-y
-------------

If an architecture uses a verbatim copy of a header from
@@ -1356,7 +1443,7 @@ See subsequent chapter for the syntax of the Kbuild file.

#include <asm-generic/termios.h>

-7.3 generated-y
+8.3 generated-y
---------------

If an architecture generates other header files alongside generic-y
@@ -1370,7 +1457,7 @@ See subsequent chapter for the syntax of the Kbuild file.
#arch/x86/include/asm/Kbuild
generated-y += syscalls_32.h

-7.4 mandatory-y
+8.4 mandatory-y
---------------

mandatory-y is essentially used by include/(uapi/)asm-generic/Kbuild
@@ -1380,7 +1467,7 @@ See subsequent chapter for the syntax of the Kbuild file.
in arch/$(ARCH)/include/(uapi/)/asm, Kbuild will automatically generate
a wrapper of the asm-generic one.

-8 Kbuild Variables
+9 Kbuild Variables
==================

The top Makefile exports the following variables:
@@ -1438,8 +1525,8 @@ The top Makefile exports the following variables:
command.


-9 Makefile language
-===================
+10 Makefile language
+====================

The kernel Makefiles are designed to be run with GNU Make. The Makefiles
use only the documented features of GNU Make, but they do use many
@@ -1458,7 +1545,7 @@ time the left-hand side is used.
There are some cases where "=" is appropriate. Usually, though, ":="
is the right choice.

-10 Credits
+11 Credits
==========

- Original version made by Michael Elizabeth Chastain, <mailto:mec@shout.net>
@@ -1466,7 +1553,7 @@ is the right choice.
- Updates by Sam Ravnborg <sam@ravnborg.org>
- Language QA by Jan Engelhardt <jengelh@gmx.de>

-11 TODO
+12 TODO
=======

- Describe how kbuild supports shipped files with _shipped.
--
2.25.1
\
 
 \ /
  Last update: 2020-04-29 05:47    [W:1.643 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site