lkml.org 
[lkml]   [2020]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] arm64: dts: imx8mn: Update VDD_ARM 1.2GHz setpoint voltage
On Sat, Apr 25, 2020 at 08:29:50PM +0800, Anson Huang wrote:
> The latest datasheet Rev. 0.1, 03/2020 removes below constrain:
>
> "If VDD_SOC/GPU/DDR = 0.95V, then VDD_ARM must be >= 0.95V."
>
> So, for 1.2GHz setpoint VDD_ARM can use its typical voltage
> directly.
>
> The datasheet can be downloaded from below link:
> https://www.nxp.com/docs/en/data-sheet/IMX8MNCEC.pdf
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Applied, thanks.

\
 
 \ /
  Last update: 2020-04-29 05:40    [W:0.057 / U:0.952 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site