lkml.org 
[lkml]   [2020]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.6 125/167] iwlwifi: pcie: indicate correct RB size to device
Date
From: Johannes Berg <johannes.berg@intel.com>

commit d8d663970234fe885f29edf4f06394d0928c89f4 upstream.

In the context info, we need to indicate the correct RB size
to the device so that it will not think we have 4k when we
only use 2k. This seems to not have caused any issues right
now, likely because the hardware no longer supports putting
multiple entries into a single RB, and practically all of
the entries should be smaller than 2k.

Nevertheless, it's a bug, and we must advertise the right
size to the device.

Note that right now we can only tell it 2k vs. 4k, so for
the cases where we have more, still use 4k. This needs to
be fixed by the firmware first.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: cfdc20efebdc ("iwlwifi: pcie: use partial pages if applicable")
Cc: stable@vger.kernel.org # v5.6
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20200417100405.ae6cd345764f.I0985c55223decf70182b9ef1d8edf4179f537853@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c | 18 +++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)

--- a/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c
@@ -129,6 +129,18 @@ int iwl_pcie_ctxt_info_gen3_init(struct
int cmdq_size = max_t(u32, IWL_CMD_QUEUE_SIZE,
trans->cfg->min_txq_size);

+ switch (trans_pcie->rx_buf_size) {
+ case IWL_AMSDU_DEF:
+ return -EINVAL;
+ case IWL_AMSDU_2K:
+ break;
+ case IWL_AMSDU_4K:
+ case IWL_AMSDU_8K:
+ case IWL_AMSDU_12K:
+ control_flags |= IWL_PRPH_SCRATCH_RB_SIZE_4K;
+ break;
+ }
+
/* Allocate prph scratch */
prph_scratch = dma_alloc_coherent(trans->dev, sizeof(*prph_scratch),
&trans_pcie->prph_scratch_dma_addr,
@@ -143,10 +155,8 @@ int iwl_pcie_ctxt_info_gen3_init(struct
cpu_to_le16((u16)iwl_read32(trans, CSR_HW_REV));
prph_sc_ctrl->version.size = cpu_to_le16(sizeof(*prph_scratch) / 4);

- control_flags = IWL_PRPH_SCRATCH_RB_SIZE_4K |
- IWL_PRPH_SCRATCH_MTR_MODE |
- (IWL_PRPH_MTR_FORMAT_256B &
- IWL_PRPH_SCRATCH_MTR_FORMAT);
+ control_flags |= IWL_PRPH_SCRATCH_MTR_MODE;
+ control_flags |= IWL_PRPH_MTR_FORMAT_256B & IWL_PRPH_SCRATCH_MTR_FORMAT;

/* initialize RX default queue */
prph_sc_ctrl->rbd_cfg.free_rbd_addr =

\
 
 \ /
  Last update: 2020-04-28 20:53    [W:0.080 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site