lkml.org 
[lkml]   [2020]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/2] mtd: rawnand: Add NAND controller support on Intel LGM SoC
On Tue, 28 Apr 2020 14:40:58 +0800
"Ramuthevar, Vadivel MuruganX"
<vadivel.muruganx.ramuthevar@linux.intel.com> wrote:

> Hi Boris,
>
> On 28/4/2020 2:27 pm, Boris Brezillon wrote:
> > On Tue, 28 Apr 2020 14:17:30 +0800
> > "Ramuthevar, Vadivel MuruganX"
> > <vadivel.muruganx.ramuthevar@linux.intel.com> wrote:
> >
> >> Hi Miquel,
> >>
> >> Thank you very much for the review comments and your time...
> >>
> >> On 27/4/2020 11:51 pm, Miquel Raynal wrote:
> >>> Hi Ramuthevar,
> >>>
> >>>>> +static int ebu_nand_probe(struct platform_device *pdev)
> >>>>> +{
> >>>>> + struct device *dev = &pdev->dev;
> >>>>> + struct ebu_nand_controller *ebu_host;
> >>>>> + struct nand_chip *nand;
> >>>>> + phys_addr_t nandaddr_pa;
> >>>>> + struct mtd_info *mtd;
> >>>>> + struct resource *res;
> >>>>> + int ret;
> >>>>> + u32 cs;
> >>>>> +
> >>>>> + ebu_host = devm_kzalloc(dev, sizeof(*ebu_host), GFP_KERNEL);
> >>>>> + if (!ebu_host)
> >>>>> + return -ENOMEM;
> >>>>> +
> >>>>> + ebu_host->dev = dev;
> >>>>> + nand_controller_init(&ebu_host->controller);
> >>>>> +
> >>>>> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ebunand");
> >>>>> + ebu_host->ebu_addr = devm_ioremap_resource(&pdev->dev, res);
> >>>>> + if (IS_ERR(ebu_host->ebu_addr))
> >>>>> + return PTR_ERR(ebu_host->ebu_addr);
> >>>>> +
> >>>>> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hsnand");
> >>>>> + ebu_host->nand_addr = devm_ioremap_resource(&pdev->dev, res);
> >>>>> + if (IS_ERR(ebu_host->nand_addr))
> >>>>> + return PTR_ERR(ebu_host->nand_addr);
> >>>>> +
> >>>>> + ret = device_property_read_u32(dev, "nand,cs", &cs);
> >>>>
> >>>> CS ids should be encoded in the reg property (see [1]).
> >>>
> >>> Is it your choice to only support a single CS or is it actually a
> >>> controller limitation?
> >>
> >> Yes , its controller limitation to support only one CS
> >
> > I'm pretty sure that's not true, otherwise you wouldn't have to select
> > the CS you want to use :P.
>
> At a time it supports only one chip select.

Yes, like 99% of the NAND controllers, but that doesn't mean you can't
support multi-CS chips. All you have to do is attach an array of
ebu_nand_cs to your ebu_nand_chip (as done in the atmel driver I
pointed to). nand_operation.cs tells you which CS (index in your
ebu_nand_cs array) a specific operation is targeting, and you can pick
the right MMIO range/reg value based on that.

\
 
 \ /
  Last update: 2020-04-28 08:48    [W:0.442 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site