lkml.org 
[lkml]   [2020]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/2] STM32 DMA Direct mode
On 22-04-20, 12:29, Amelie Delaunay wrote:
> By default, the driver compute if the FIFO must operate in direct mode or with
> FIFO threshold. Direct mode is allowed only if computed source burst and
> destination burst are disabled. But with memory source or destination, burst
> is always > 0.
> Direct mode is useful when the peripheral requires an immediate and single
> transfer to or from the memory after each DMA request.
> This patchset adds a way to force Direct mode through device tree.

Applied, thanks

--
~Vinod

\
 
 \ /
  Last update: 2020-04-27 18:11    [W:0.065 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site