lkml.org 
[lkml]   [2020]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/8] iio: light: cm32181: Handle ACPI instantiating a cm32181 client on the SMBus ARA
Date
Some ACPI systems list 2 I2C resources for the CM3218 sensor. On these
systems the first I2cSerialBus ACPI-resource points to the SMBus Alert
Response Address (ARA, 0x0c) and the second I2cSerialBus ACPI-resource
points to the actual CM3218 sensor address.

From the ACPI/x86 side devices with more then 1 I2cSerialBus ACPI-resource
are handled by the drivers/platform/x86/i2c-multi-instantiate.c code.
This code will instantiate "cm32181" i2c_client-s for both resources.

Add a check to cm32181_probe() for the client's address being the ARA
address, and in that case fail the probe with -ENODEV.

On these ACPI systems the sensor may have a SMBus Alert asserted at boot,
if this is the case the sensor will not respond to any i2c_transfers on
its actual address until we read from the ARA register to clear the Alert.

Therefor we must (try to) read a byte from the client with the ARA
register, before returning -ENODEV, so that we clear the Alert and when
we get called again for the client instantiated for the second
I2cSerialBus ACPI-resource the sensor will respond to our i2c-transfers.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2
- s/i2c_client-s/I2C clients/ in added comment
---
drivers/iio/light/cm32181.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/drivers/iio/light/cm32181.c b/drivers/iio/light/cm32181.c
index fd371b36c7b3..4c26a4a8a070 100644
--- a/drivers/iio/light/cm32181.c
+++ b/drivers/iio/light/cm32181.c
@@ -51,6 +51,8 @@
#define CM32181_CALIBSCALE_RESOLUTION 1000
#define MLUX_PER_LUX 1000

+#define SMBUS_ALERT_RESPONSE_ADDRESS 0x0c
+
static const u8 cm32181_reg[CM32181_CONF_REG_NUM] = {
CM32181_REG_ADDR_CMD,
};
@@ -333,6 +335,20 @@ static int cm32181_probe(struct i2c_client *client,
struct iio_dev *indio_dev;
int ret;

+ /*
+ * Some ACPI systems list 2 I2C resources for the CM3218 sensor, the
+ * SMBus Alert Response Address (ARA, 0x0c) and the actual I2C address.
+ * drivers/platform/x86/i2c-multi-instantiate.c instantiates "cm32181"
+ * I2C clients for both resources, ignore the ARA client.
+ * On these systems the sensor may have a SMBus Alert asserted at boot,
+ * in that case the ARA must be read to clear the Alert otherwise the
+ * sensor will not respond on its actual I2C address.
+ */
+ if (client->addr == SMBUS_ALERT_RESPONSE_ADDRESS) {
+ i2c_smbus_read_byte(client);
+ return -ENODEV;
+ }
+
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*cm32181));
if (!indio_dev) {
dev_err(&client->dev, "devm_iio_device_alloc failed\n");
--
2.26.0
\
 
 \ /
  Last update: 2020-04-27 17:51    [W:0.068 / U:12.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site