lkml.org 
[lkml]   [2020]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/3] arm64: dts: ti: am654: Add DSS node
From
Date
On 27/04/2020 13:08, Tero Kristo wrote:
> On 22/04/2020 12:15, Tomi Valkeinen wrote:
>> From: Jyri Sarha <jsarha@ti.com>
>>
>> Add DSS node to k3-am65-main.dtsi with labels for board specific
>> support and syscon node for oldi-io-ctrl.
>>
>> Signed-off-by: Jyri Sarha <jsarha@ti.com>
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
>> ---
>>   arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 44 ++++++++++++++++++++++++
>>   1 file changed, 44 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>> index 11887c72f23a..7d1bc991708e 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>> @@ -287,6 +287,11 @@
>>               mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */
>>                       <0x4090 0x3>; /* SERDES1 lane select */
>>           };
>> +
>> +        dss_oldi_io_ctrl: dss_oldi_io_ctrl@41E0 {
>> +            compatible = "syscon";
>> +            reg = <0x0000041E0 0x14>;
>> +        };
>>       };
>>       dwc3_0: dwc3@4000000 {
>> @@ -746,4 +751,43 @@
>>               };
>>           };
>>       };
>> +
>> +    dss: dss@04a00000 {
>> +        compatible = "ti,am65x-dss";
>> +        reg =    <0x0 0x04a00000 0x0 0x1000>, /* common */
>> +            <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */
>> +            <0x0 0x04a06000 0x0 0x1000>, /* vid */
>> +            <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */
>> +            <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */
>> +            <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */
>> +            <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */
>> +        reg-names = "common", "vidl1", "vid",
>> +            "ovr1", "ovr2", "vp1", "vp2";
>> +
>> +        ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
>> +
>> +        power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
>> +
>> +        clocks =    <&k3_clks 67 1>,
>> +                <&k3_clks 216 1>,
>> +                <&k3_clks 67 2>;
>> +        clock-names = "fck", "vp1", "vp2";
>> +
>> +        /*
>> +         * Set vp2 clk (DPI_1_IN_CLK) mux to PLL4 via
>> +         * DIV1. See "Figure 12-3365. DSS Integration"
>> +         * in AM65x TRM for details.
>> +         */
>> +        assigned-clocks = <&k3_clks 67 2>;
>> +        assigned-clock-parents = <&k3_clks 67 5>;
>> +
>> +        interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
>> +
>> +        status = "disabled";
>
> Any reason why the node is disabled? Are you planning to enable it somewhere later on, or is that
> left for the user to do?

It's enabled in board DT files or DT overlays which add a display and the DT graph for the
connections. Having DSS driver probe without any displays is a waste of resources.

Tomi

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2020-04-27 12:51    [W:0.079 / U:0.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site