lkml.org 
[lkml]   [2020]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 3/5] iio: vcnl4000: Add event support for VCNL4010/20.
Date
The VCNL4010 and VCNL4020 chips are able to raise interrupts on proximity
threshold events. Add support for threshold rising and falling events for
those two chips.

Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
---
drivers/iio/light/vcnl4000.c | 454 ++++++++++++++++++++++++++++++-----
1 file changed, 392 insertions(+), 62 deletions(-)

diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index b976e29f2fda..e7653037fa5d 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -13,7 +13,6 @@
*
* TODO:
* allow to adjust IR current
- * proximity threshold and event handling
* periodic ALS/proximity measurement (VCNL4010/20)
* interrupts (VCNL4010/20/40, VCNL4200)
*/
@@ -23,7 +22,9 @@
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/pm_runtime.h>
+#include <linux/interrupt.h>

+#include <linux/iio/events.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>

@@ -35,14 +36,22 @@

#define VCNL4000_COMMAND 0x80 /* Command register */
#define VCNL4000_PROD_REV 0x81 /* Product ID and Revision ID */
+#define VCNL4010_PROX_RATE 0x82 /* Proximity rate */
#define VCNL4000_LED_CURRENT 0x83 /* IR LED current for proximity mode */
#define VCNL4000_AL_PARAM 0x84 /* Ambient light parameter register */
+#define VCNL4010_ALS_PARAM 0x84 /* ALS rate */
#define VCNL4000_AL_RESULT_HI 0x85 /* Ambient light result register, MSB */
#define VCNL4000_AL_RESULT_LO 0x86 /* Ambient light result register, LSB */
#define VCNL4000_PS_RESULT_HI 0x87 /* Proximity result register, MSB */
#define VCNL4000_PS_RESULT_LO 0x88 /* Proximity result register, LSB */
#define VCNL4000_PS_MEAS_FREQ 0x89 /* Proximity test signal frequency */
+#define VCNL4010_INT_CTRL 0x89 /* Interrupt control */
#define VCNL4000_PS_MOD_ADJ 0x8a /* Proximity modulator timing adjustment */
+#define VCNL4010_LOW_THR_HI 0x8a /* Low threshold, MSB */
+#define VCNL4010_LOW_THR_LO 0x8b /* Low threshold, LSB */
+#define VCNL4010_HIGH_THR_HI 0x8c /* High threshold, MSB */
+#define VCNL4010_HIGH_THR_LO 0x8d /* High threshold, LSB */
+#define VCNL4010_ISR 0x8e /* Interrupt status */

#define VCNL4200_AL_CONF 0x00 /* Ambient light configuration */
#define VCNL4200_PS_CONF1 0x03 /* Proximity configuration */
@@ -57,6 +66,26 @@
#define VCNL4000_PS_RDY BIT(5) /* proximity data ready? */
#define VCNL4000_AL_OD BIT(4) /* start on-demand ALS measurement */
#define VCNL4000_PS_OD BIT(3) /* start on-demand proximity measurement */
+#define VCNL4000_ALS_EN BIT(2) /* start ALS measurement */
+#define VCNL4000_PROX_EN BIT(1) /* start proximity measurement */
+#define VCNL4000_SELF_TIMED_EN BIT(0) /* start self-timed measurement */
+
+/* Bit masks for interrupt registers. */
+#define VCNL4010_INT_THR_SEL BIT(0) /* Select threshold interrupt source */
+#define VCNL4010_INT_THR_EN BIT(1) /* Threshold interrupt type */
+#define VCNL4010_INT_ALS_EN BIT(2) /* Enable on ALS data ready */
+#define VCNL4010_INT_PROX_EN BIT(3) /* Enable on proximity data ready */
+
+#define VCNL4010_INT_THR_HIGH 0 /* High threshold exceeded */
+#define VCNL4010_INT_THR_LOW 1 /* Low threshold exceeded */
+#define VCNL4010_INT_ALS 2 /* ALS data ready */
+#define VCNL4010_INT_PROXIMITY 3 /* Proximity data ready */
+
+#define VCNL4010_INT_THR \
+ (BIT(VCNL4010_INT_THR_LOW) | BIT(VCNL4010_INT_THR_HIGH))
+#define VCNL4010_INT_DRDY \
+ (BIT(VCNL4010_INT_PROXIMITY) | BIT(VCNL4010_INT_ALS))
+

#define VCNL4000_SLEEP_DELAY_MS 2000 /* before we enter pm_runtime_suspend */

@@ -88,6 +117,10 @@ struct vcnl4000_data {

struct vcnl4000_chip_spec {
const char *prod;
+ struct iio_chan_spec const *channels;
+ const int num_channels;
+ const struct iio_info *info;
+ bool irq_support;
int (*init)(struct vcnl4000_data *data);
int (*measure_light)(struct vcnl4000_data *data, int *val);
int (*measure_proximity)(struct vcnl4000_data *data, int *val);
@@ -330,67 +363,16 @@ static int vcnl4200_measure_proximity(struct vcnl4000_data *data, int *val)
return vcnl4200_measure(data, &data->vcnl4200_ps, val);
}

-static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
- [VCNL4000] = {
- .prod = "VCNL4000",
- .init = vcnl4000_init,
- .measure_light = vcnl4000_measure_light,
- .measure_proximity = vcnl4000_measure_proximity,
- .set_power_state = vcnl4000_set_power_state,
- },
- [VCNL4010] = {
- .prod = "VCNL4010/4020",
- .init = vcnl4000_init,
- .measure_light = vcnl4000_measure_light,
- .measure_proximity = vcnl4000_measure_proximity,
- .set_power_state = vcnl4000_set_power_state,
- },
- [VCNL4040] = {
- .prod = "VCNL4040",
- .init = vcnl4200_init,
- .measure_light = vcnl4200_measure_light,
- .measure_proximity = vcnl4200_measure_proximity,
- .set_power_state = vcnl4200_set_power_state,
- },
- [VCNL4200] = {
- .prod = "VCNL4200",
- .init = vcnl4200_init,
- .measure_light = vcnl4200_measure_light,
- .measure_proximity = vcnl4200_measure_proximity,
- .set_power_state = vcnl4200_set_power_state,
- },
-};
-
-static ssize_t vcnl4000_read_near_level(struct iio_dev *indio_dev,
- uintptr_t priv,
- const struct iio_chan_spec *chan,
- char *buf)
+static bool vcnl4010_is_in_periodic_mode(struct vcnl4000_data *data)
{
- struct vcnl4000_data *data = iio_priv(indio_dev);
-
- return sprintf(buf, "%u\n", data->near_level);
-}
+ int ret;

-static const struct iio_chan_spec_ext_info vcnl4000_ext_info[] = {
- {
- .name = "nearlevel",
- .shared = IIO_SEPARATE,
- .read = vcnl4000_read_near_level,
- },
- { /* sentinel */ }
-};
+ ret = i2c_smbus_read_byte_data(data->client, VCNL4000_COMMAND);
+ if (ret < 0)
+ return false;

-static const struct iio_chan_spec vcnl4000_channels[] = {
- {
- .type = IIO_LIGHT,
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
- BIT(IIO_CHAN_INFO_SCALE),
- }, {
- .type = IIO_PROXIMITY,
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .ext_info = vcnl4000_ext_info,
- }
-};
+ return !!(ret & VCNL4000_SELF_TIMED_EN);
+}

static int vcnl4000_set_pm_runtime_state(struct vcnl4000_data *data, bool on)
{
@@ -450,10 +432,345 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,
}
}

+static int vcnl4010_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ int ret;
+ struct vcnl4000_data *data = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ case IIO_CHAN_INFO_SCALE:
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ /* Protect against event capture. */
+ if (vcnl4010_is_in_periodic_mode(data)) {
+ ret = -EBUSY;
+ } else {
+ ret = vcnl4000_read_raw(indio_dev, chan, val, val2,
+ mask);
+ }
+
+ iio_device_release_direct_mode(indio_dev);
+ return ret;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int vcnl4010_read_event(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int *val, int *val2)
+{
+ int ret;
+ struct vcnl4000_data *data = iio_priv(indio_dev);
+
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ switch (dir) {
+ case IIO_EV_DIR_RISING:
+ ret = vcnl4000_read_data(data, VCNL4010_HIGH_THR_HI,
+ val);
+ if (ret < 0)
+ return ret;
+ return IIO_VAL_INT;
+ case IIO_EV_DIR_FALLING:
+ ret = vcnl4000_read_data(data, VCNL4010_LOW_THR_HI,
+ val);
+ if (ret < 0)
+ return ret;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+ default:
+ return -EINVAL;
+ }
+}
+
+static int vcnl4010_write_event(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int val, int val2)
+{
+ int ret;
+ struct vcnl4000_data *data = iio_priv(indio_dev);
+
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ switch (dir) {
+ case IIO_EV_DIR_RISING:
+ ret = vcnl4000_write_data(data, VCNL4010_HIGH_THR_HI,
+ val);
+ if (ret < 0)
+ return ret;
+ return IIO_VAL_INT;
+ case IIO_EV_DIR_FALLING:
+ ret = vcnl4000_write_data(data, VCNL4010_LOW_THR_HI,
+ val);
+ if (ret < 0)
+ return ret;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+ default:
+ return -EINVAL;
+ }
+}
+
+static bool vcnl4010_is_thr_enabled(struct vcnl4000_data *data)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(data->client, VCNL4010_INT_CTRL);
+ if (ret < 0)
+ return false;
+
+ return !!(ret & VCNL4010_INT_THR_EN);
+}
+
+static int vcnl4010_read_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir)
+{
+ struct vcnl4000_data *data = iio_priv(indio_dev);
+
+ switch (chan->type) {
+ case IIO_PROXIMITY:
+ return vcnl4010_is_thr_enabled(data);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int vcnl4010_config_threshold(struct iio_dev *indio_dev, bool state)
+{
+ struct vcnl4000_data *data = iio_priv(indio_dev);
+ int ret;
+ int icr;
+ int command;
+
+ if (state) {
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ /* Enable periodic measurement of proximity data. */
+ command = VCNL4000_SELF_TIMED_EN | VCNL4000_PROX_EN;
+
+ /*
+ * Enable interrupts on threshold, for proximity data by
+ * default.
+ */
+ icr = VCNL4010_INT_THR_EN;
+ } else {
+ if (!vcnl4010_is_thr_enabled(data))
+ return 0;
+
+ command = 0;
+ icr = 0;
+ }
+
+ ret = i2c_smbus_write_byte_data(data->client, VCNL4000_COMMAND,
+ command);
+ if (ret < 0)
+ goto end;
+
+ ret = i2c_smbus_write_byte_data(data->client, VCNL4010_INT_CTRL, icr);
+
+end:
+ if (state)
+ iio_device_release_direct_mode(indio_dev);
+
+ return ret;
+}
+
+static int vcnl4010_write_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ int state)
+{
+ switch (chan->type) {
+ case IIO_PROXIMITY:
+ return vcnl4010_config_threshold(indio_dev, state);
+ default:
+ return -EINVAL;
+ }
+}
+
+static ssize_t vcnl4000_read_near_level(struct iio_dev *indio_dev,
+ uintptr_t priv,
+ const struct iio_chan_spec *chan,
+ char *buf)
+{
+ struct vcnl4000_data *data = iio_priv(indio_dev);
+
+ return sprintf(buf, "%u\n", data->near_level);
+}
+
+static const struct iio_chan_spec_ext_info vcnl4000_ext_info[] = {
+ {
+ .name = "nearlevel",
+ .shared = IIO_SEPARATE,
+ .read = vcnl4000_read_near_level,
+ },
+ { /* sentinel */ }
+};
+
+static const struct iio_event_spec vcnl4000_event_spec[] = {
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE),
+ }, {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE),
+ }, {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_EITHER,
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE),
+ }
+};
+
+static const struct iio_chan_spec vcnl4000_channels[] = {
+ {
+ .type = IIO_LIGHT,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ }, {
+ .type = IIO_PROXIMITY,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .ext_info = vcnl4000_ext_info,
+ }
+};
+
+static const struct iio_chan_spec vcnl4010_channels[] = {
+ {
+ .type = IIO_LIGHT,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ }, {
+ .type = IIO_PROXIMITY,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .event_spec = vcnl4000_event_spec,
+ .num_event_specs = ARRAY_SIZE(vcnl4000_event_spec),
+ .ext_info = vcnl4000_ext_info,
+ },
+};
+
static const struct iio_info vcnl4000_info = {
.read_raw = vcnl4000_read_raw,
};

+static const struct iio_info vcnl4010_info = {
+ .read_raw = vcnl4010_read_raw,
+ .read_event_value = vcnl4010_read_event,
+ .write_event_value = vcnl4010_write_event,
+ .read_event_config = vcnl4010_read_event_config,
+ .write_event_config = vcnl4010_write_event_config,
+};
+
+static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
+ [VCNL4000] = {
+ .prod = "VCNL4000",
+ .init = vcnl4000_init,
+ .measure_light = vcnl4000_measure_light,
+ .measure_proximity = vcnl4000_measure_proximity,
+ .set_power_state = vcnl4000_set_power_state,
+ .channels = vcnl4000_channels,
+ .num_channels = ARRAY_SIZE(vcnl4000_channels),
+ .info = &vcnl4000_info,
+ .irq_support = false,
+ },
+ [VCNL4010] = {
+ .prod = "VCNL4010/4020",
+ .init = vcnl4000_init,
+ .measure_light = vcnl4000_measure_light,
+ .measure_proximity = vcnl4000_measure_proximity,
+ .set_power_state = vcnl4000_set_power_state,
+ .channels = vcnl4010_channels,
+ .num_channels = ARRAY_SIZE(vcnl4010_channels),
+ .info = &vcnl4010_info,
+ .irq_support = true,
+ },
+ [VCNL4040] = {
+ .prod = "VCNL4040",
+ .init = vcnl4200_init,
+ .measure_light = vcnl4200_measure_light,
+ .measure_proximity = vcnl4200_measure_proximity,
+ .set_power_state = vcnl4200_set_power_state,
+ .channels = vcnl4000_channels,
+ .num_channels = ARRAY_SIZE(vcnl4000_channels),
+ .info = &vcnl4000_info,
+ .irq_support = false,
+ },
+ [VCNL4200] = {
+ .prod = "VCNL4200",
+ .init = vcnl4200_init,
+ .measure_light = vcnl4200_measure_light,
+ .measure_proximity = vcnl4200_measure_proximity,
+ .set_power_state = vcnl4200_set_power_state,
+ .channels = vcnl4000_channels,
+ .num_channels = ARRAY_SIZE(vcnl4000_channels),
+ .info = &vcnl4000_info,
+ .irq_support = false,
+ },
+};
+
+static irqreturn_t vcnl4010_irq_thread(int irq, void *p)
+{
+ struct iio_dev *indio_dev = p;
+ struct vcnl4000_data *data = iio_priv(indio_dev);
+ unsigned long isr;
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(data->client, VCNL4010_ISR);
+ if (ret < 0)
+ goto end;
+
+ isr = ret;
+
+ if (isr & VCNL4010_INT_THR) {
+ if (test_bit(VCNL4010_INT_THR_LOW, &isr)) {
+ iio_push_event(indio_dev,
+ IIO_UNMOD_EVENT_CODE(
+ IIO_PROXIMITY,
+ 1,
+ IIO_EV_TYPE_THRESH,
+ IIO_EV_DIR_FALLING),
+ iio_get_time_ns(indio_dev));
+ }
+
+ if (test_bit(VCNL4010_INT_THR_HIGH, &isr)) {
+ iio_push_event(indio_dev,
+ IIO_UNMOD_EVENT_CODE(
+ IIO_PROXIMITY,
+ 1,
+ IIO_EV_TYPE_THRESH,
+ IIO_EV_DIR_RISING),
+ iio_get_time_ns(indio_dev));
+ }
+
+ i2c_smbus_write_byte_data(data->client, VCNL4010_ISR,
+ isr & VCNL4010_INT_THR);
+ }
+
+end:
+ return IRQ_HANDLED;
+}
+
static int vcnl4000_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -483,12 +800,25 @@ static int vcnl4000_probe(struct i2c_client *client,
data->near_level = 0;

indio_dev->dev.parent = &client->dev;
- indio_dev->info = &vcnl4000_info;
- indio_dev->channels = vcnl4000_channels;
- indio_dev->num_channels = ARRAY_SIZE(vcnl4000_channels);
+ indio_dev->info = data->chip_spec->info;
+ indio_dev->channels = data->chip_spec->channels;
+ indio_dev->num_channels = data->chip_spec->num_channels;
indio_dev->name = VCNL4000_DRV_NAME;
indio_dev->modes = INDIO_DIRECT_MODE;

+ if (client->irq && data->chip_spec->irq_support) {
+ ret = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, vcnl4010_irq_thread,
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
+ "vcnl4010_irq",
+ indio_dev);
+ if (ret < 0) {
+ dev_err(&client->dev, "irq request failed\n");
+ return ret;
+ }
+ }
+
ret = pm_runtime_set_active(&client->dev);
if (ret < 0)
goto fail_poweroff;
--
2.26.0
\
 
 \ /
  Last update: 2020-04-27 11:56    [W:0.090 / U:23.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site