This message generated a parse failure. Raw output follows here. Please use 'back' to navigate. From devnull@lkml.org Fri Apr 19 20:00:34 2024 >From mailfetcher Mon Apr 27 23:17:55 2020 Envelope-to: lkml@grols.ch Delivery-date: Mon, 27 Apr 2020 23:17:54 +0200 Received: from stout.grols.ch [195.201.141.146] by 72459556e3a9 with IMAP (fetchmail-6.3.26) for (single-drop); Mon, 27 Apr 2020 23:17:55 +0200 (CEST) Received: from vger.kernel.org ([23.128.96.18]) by stout.grols.ch with esmtp (Exim 4.89) (envelope-from ) id 1jTB8T-0006q8-DR for lkml@grols.ch; Mon, 27 Apr 2020 23:17:54 +0200 Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726345AbgD0VRm (ORCPT ); Mon, 27 Apr 2020 17:17:42 -0400 Received: from mail.kernel.org ([198.145.29.99]:34168 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726391AbgD0VRc (ORCPT ); Mon, 27 Apr 2020 17:17:32 -0400 Received: from mail.kernel.org (ip5f5ad5c5.dynamic.kabel-deutschland.de [95.90.213.197]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPSA id 3F87 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1588022244; bh=5A9WQLwpriqJizQ228mdpJqHFTh0liZuIaevXQ+F5Mg=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=UKph4aY8roP0z0nOBhOgKO9PwDiITGBXviUCIK8ksCtU Received: from mchehab by mail.kernel.org with local (Exim 4.92.3) (envelope-from ) id 1jTB7y-000HkK-GA; Mon, 27 Apr 2020 23:17:22 +0200 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jan Harkes , coda@cs.cmu.edu, codalist@coda.cs.cmu.edu Subject: [PATCH v3 09/29] docs: filesystems: convert coda.txt to ReST Date: Mon, 27 Apr 2020 23:17:01 +0200 Message-Id: <25c06c40c3d7b947a131c3be124ce0e93cc00ae3.1588021877.git.mchehab+huawei@kernel.org> X-Mailer: git-send-email 2.25.4 In-Reply-To: References: Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-Id: X-Mailing-List: linux-kernel@vger.kernel.org Received-SPF: pass client-ip=23.128.96.18; envelope-from=linux-kernel-owner@vger.kernel.org; helo=vger.kernel.org X-Spam-Score: 3.9 X-Spam-Score-Bar: +++ X-Spam-Action: no action X-Spam-Report: Action: no action Symbol: ARC_NA(0.00) Symbol: RCVD_VIA_SMTP_AUTH(0.00) Symbol: R_DKIM_ALLOW(-0.20) Symbol: MID_RHS_MATCH_FROM(0.00) Symbol: FROM_HAS_DN(0.00) Symbol: TO_DN_SOME(0.00) Symbol: R_SPF_ALLOW(-0.20) Symbol: PRECEDENCE_BULK(0.00) Symbol: TAGGE This document has its own style. It seems to be print output for the old matrixial printers where backspace were used to do double prints. For the conversion, I used several regex expressions to get rid of some weird stuff. The patch also does almost all possible conversions in order to get a nice output document, while keeping it readable/editable as is: - Add a SPDX header; - Add a document title; - Adjust document title; - Adjust section titles; - Some whitespace fixes and new line breaks; - Mark literal blocks as such; - Adjust list markups; - Mark some unumbered titles with bold font; - Use footnoote markups; - Add table markups; - Use notes markups; - Add it to filesystems/index.rst. Signed-off-by: Mauro Carvalho Chehab --- Documentation/filesystems/coda.rst | 1670 ++++++++++++++++++++++++++ Documentation/filesystems/coda.txt | 1676 --------------------------- Documentation/filesystems/index.rst | 1 + MAINTAINERS | 2 +- fs/coda/Kconfig | 2 +- 5 files changed, 1673 insertions(+), 1678 deletions(-) create mode 100644 Documentation/filesystems/coda.rst delete mode 100644 Documentation/filesystems/coda.txt diff --git a/Documentation/filesystems/coda.rst b/Documentation/filesystems/coda.rst new file mode 100644 index 000000000000..84c860c89887 --- /dev/null +++ b/Documentation/filesystems/coda.rst @@ -0,0 +1,1670 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========================== +Coda Kernel-Venus Interface +=========================== + +.. Note:: + + This is one of the technical documents describing a component of + Coda -- this document describes the client kernel-Venus interface. + +For more information: + + http://www.coda.cs.cmu.edu + +For user level software needed to run Coda: + + ftp://ftp.coda.cs.cmu.edu + +To run Coda you need to get a user level cache manager for the client, +named Venus, as well as tools to manipulate ACLs, to log in, etc. The +client needs to have the Coda filesystem selected in the kernel +configuration. + +The server needs a user level server and at present does not depend on +kernel support. + + The Venus kernel interface + + Peter J. Braam + + v1.0, Nov 9, 1997 + + This document describes the communication between Venus and kernel + level filesystem code needed for the operation of the Coda file sys- + tem. This document version is meant to describe the current interface + (version 1.0) as well as improvements we envisage. + +.. Table of Contents + + 1. Introduction + + 2. Servicing Coda filesystem calls + + 3. The message layer + + 3.1 Implementation details + + 4. The interface at the call level + + 4.1 Data structures shared by the kernel and Venus + 4.2 The pioctl interface + 4.3 root + 4.4 lookup + 4.5 getattr + 4.6 setattr + 4.7 access + 4.8 create + 4.9 mkdir + 4.10 link + 4.11 symlink + 4.12 remove + 4.13 rmdir + 4.14 readlink + 4.15 open + 4.16 close + 4.17 ioctl + 4.18 rename + 4.19 readdir + 4.20 vget + 4.21 fsync + 4.22 inactive + 4.23 rdwr + 4.24 odymount + 4.25 ody_lookup + 4.26 ody_expand + 4.27 prefetch + 4.28 signal + + 5. The minicache and downcalls + + 5.1 INVALIDATE + 5.2 FLUSH + 5.3 PURGEUSER + 5.4 ZAPFILE + 5.5 ZAPDIR + 5.6 ZAPVNODE + 5.7 PURGEFID + 5.8 REPLACE + + 6. Initialization and cleanup + + 6.1 Requirements + +1. Introduction +=============== + + A key component in the Coda Distributed File System is the cache + manager, Venus. + + When processes on a Coda enabled system access files in the Coda + filesystem, requests are directed at the filesystem layer in the + operating system. The operating system will communicate with Venus to + service the request for the process. Venus manages a persistent + client cache and makes remote procedure calls to Coda file servers and + related servers (such as authentication servers) to service these + requests it receives from the operating system. When Venus has + serviced a request it replies to the operating system with appropriate + return codes, and other data related to the request. Optionally the + kernel support for Coda may maintain a minicache of recently processed + requests to limit the number of interactions with Venus. Venus + possesses the facility to inform the kernel when elements from its + minicache are no longer valid. + + This document describes precisely this communication between the + kernel and Venus. The definitions of so called upcalls and downcalls + will be given with the format of the data they handle. We shall also + describe the semantic invariants resulting from the calls. + + Historically Coda was implemented in a BSD file system in Mach 2.6. + The interface between the kernel and Venus is very similar to the BSD + VFS interface. Similar functionality is provided, and the format of + the parameters and returned data is very similar to the BSD VFS. This + leads to an almost natural environment for implementing a kernel-level + filesystem driver for Coda in a BSD system. However, other operating + systems such as Linux and Windows 95 and NT have virtual filesystem + with different interfaces. + + To implement Coda on these systems some reverse engineering of the + Venus/Kernel protocol is necessary. Also it came to light that other + systems could profit significantly from certain small optimizations + and modifications to the protocol. To facilitate this work as well as + to make future ports easier, communication between Venus and the + kernel should be documented in great detail. This is the aim of this + document. + +2. Servicing Coda filesystem calls +=================================== + + The service of a request for a Coda file system service originates in + a process P which accessing a Coda file. It makes a system call which + traps to the OS kernel. Examples of such calls trapping to the kernel + are ``read``, ``write``, ``open``, ``close``, ``create``, ``mkdir``, + ``rmdir``, ``chmod`` in a Unix ontext. Similar calls exist in the Win32 + environment, and are named ``CreateFile``. + + Generally the operating system handles the request in a virtual + filesystem (VFS) layer, which is named I/O Manager in NT and IFS + manager in Windows 95. The VFS is responsible for partial processing + of the request and for locating the specific filesystem(s) which will + service parts of the request. Usually the information in the path + assists in locating the correct FS drivers. Sometimes after extensive + pre-processing, the VFS starts invoking exported routines in the FS + driver. This is the point where the FS specific processing of the + request starts, and here the Coda specific kernel code comes into + play. + + The FS layer for Coda must expose and implement several interfaces. + First and foremost the VFS must be able to make all necessary calls to + the Coda FS layer, so the Coda FS driver must expose the VFS interface + as applicable in the operating system. These differ very significantly + among operating systems, but share features such as facilities to + read/write and create and remove objects. The Coda FS layer services + such VFS requests by invoking one or more well defined services + offered by the cache manager Venus. When the replies from Venus have + come back to the FS driver, servicing of the VFS call continues and + finishes with a reply to the kernel's VFS. Finally the VFS layer + returns to the process. + + As a result of this design a basic interface exposed by the FS driver + must allow Venus to manage message traffic. In particular Venus must + be able to retrieve and place messages and to be notified of the + arrival of a new message. The notification must be through a mechanism + which does not block Venus since Venus must attend to other tasks even + when no messages are waiting or being processed. + + **Interfaces of the Coda FS Driver** + + Furthermore the FS layer provides for a special path of communication + between a user process and Venus, called the pioctl interface. The + pioctl interface is used for Coda specific services, such as + requesting detailed information about the persistent cache managed by + Venus. Here the involvement of the kernel is minimal. It identifies + the calling process and passes the information on to Venus. When + Venus replies the response is passed back to the caller in unmodified + form. + + Finally Venus allows the kernel FS driver to cache the results from + certain services. This is done to avoid excessive context switches + and results in an efficient system. However, Venus may acquire + information, for example from the network which implies that cached + information must be flushed or replaced. Venus then makes a downcall + to the Coda FS layer to request flushes or updates in the cache. The + kernel FS driver handles such requests synchronously. + + Among these interfaces the VFS interface and the facility to place, + receive and be notified of messages are platform specific. We will + not go into the calls exported to the VFS layer but we will state the + requirements of the message exchange mechanism. + + +3. The message layer +===================== + + At the lowest level the communication between Venus and the FS driver + proceeds through messages. The synchronization between processes + requesting Coda file service and Venus relies on blocking and waking + up processes. The Coda FS driver processes VFS- and pioctl-requests + on behalf of a process P, creates messages for Venus, awaits replies + and finally returns to the caller. The implementation of the exchange + of messages is platform specific, but the semantics have (so far) + appeared to be generally applicable. Data buffers are created by the + FS Driver in kernel memory on behalf of P and copied to user memory in + Venus. + + The FS Driver while servicing P makes upcalls to Venus. Such an + upcall is dispatched to Venus by creating a message structure. The + structure contains the identification of P, the message sequence + number, the size of the request and a pointer to the data in kernel + memory for the request. Since the data buffer is re-used to hold the + reply from Venus, there is a field for the size of the reply. A flags + field is used in the message to precisely record the status of the + message. Additional platform dependent structures involve pointers to + determine the position of the message on queues and pointers to + synchronization objects. In the upcall routine the message structure + is filled in, flags are set to 0, and it is placed on the *pending* + queue. The routine calling upcall is responsible for allocating the + data buffer; its structure will be described in the next section. + + A facility must exist to notify Venus that the message has been + created, and implemented using available synchronization objects in + the OS. This notification is done in the upcall context of the process + P. When the message is on the pending queue, process P cannot proceed + in upcall. The (kernel mode) processing of P in the filesystem + request routine must be suspended until Venus has replied. Therefore + the calling thread in P is blocked in upcall. A pointer in the + message structure will locate the synchronization object on which P is + sleeping. + + Venus detects the notification that a message has arrived, and the FS + driver allow Venus to retrieve the message with a getmsg_from_kernel + call. This action finishes in the kernel by putting the message on the + queue of processing messages and setting flags to READ. Venus is + passed the contents of the data buffer. The getmsg_from_kernel call + now returns and Venus processes the request. + + At some later point the FS driver receives a message from Venus, + namely when Venus calls sendmsg_to_kernel. At this moment the Coda FS + driver looks at the contents of the message and decides if: + + + * the message is a reply for a suspended thread P. If so it removes + the message from the processing queue and marks the message as + WRITTEN. Finally, the FS driver unblocks P (still in the kernel + mode context of Venus) and the sendmsg_to_kernel call returns to + Venus. The process P will be scheduled at some point and continues + processing its upcall with the data buffer replaced with the reply + from Venus. + + * The message is a ``downcall``. A downcall is a request from Venus to + the FS Driver. The FS driver processes the request immediately + (usually a cache eviction or replacement) and when it finishes + sendmsg_to_kernel returns. + + Now P awakes and continues processing upcall. There are some + subtleties to take account of. First P will determine if it was woken + up in upcall by a signal from some other source (for example an + attempt to terminate P) or as is normally the case by Venus in its + sendmsg_to_kernel call. In the normal case, the upcall routine will + deallocate the message structure and return. The FS routine can proceed + with its processing. + + + **Sleeping and IPC arrangements** + + In case P is woken up by a signal and not by Venus, it will first look + at the flags field. If the message is not yet READ, the process P can + handle its signal without notifying Venus. If Venus has READ, and + the request should not be processed, P can send Venus a signal message + to indicate that it should disregard the previous message. Such + signals are put in the queue at the head, and read first by Venus. If + the message is already marked as WRITTEN it is too late to stop the + processing. The VFS routine will now continue. (-- If a VFS request + involves more than one upcall, this can lead to complicated state, an + extra field "handle_signals" could be added in the message structure + to indicate points of no return have been passed.--) + + + +3.1. Implementation details +---------------------------- + + The Unix implementation of this mechanism has been through the + implementation of a character device associated with Coda. Venus + retrieves messages by doing a read on the device, replies are sent + with a write and notification is through the select system call on the + file descriptor for the device. The process P is kept waiting on an + interruptible wait queue object. + + In Windows NT and the DPMI Windows 95 implementation a DeviceIoControl + call is used. The DeviceIoControl call is designed to copy buffers + from user memory to kernel memory with OPCODES. The sendmsg_to_kernel + is issued as a synchronous call, while the getmsg_from_kernel call is + asynchronous. Windows EventObjects are used for notification of + message arrival. The process P is kept waiting on a KernelEvent + object in NT and a semaphore in Windows 95. + + +4. The interface at the call level +=================================== + + + This section describes the upcalls a Coda FS driver can make to Venus. + Each of these upcalls make use of two structures: inputArgs and + outputArgs. In pseudo BNF form the structures take the following + form:: + + + struct inputArgs { + u_long opcode; + u_long unique; /* Keep multiple outstanding msgs distinct */ + u_short pid; /* Common to all */ + u_short pgid; /* Common to all */ + struct CodaCred cred; /* Common to all */ + + + }; + + struct outputArgs { + u_long opcode; + u_long unique; /* Keep multiple outstanding msgs distinct */ + u_long result; + + + }; + + + + Before going on let us elucidate the role of the various fields. The + inputArgs start with the opcode which defines the type of service + requested from Venus. There are approximately 30 upcalls at present + which we will discuss. The unique field labels the inputArg with a + unique number which will identify the message uniquely. A process and + process group id are passed. Finally the credentials of the caller + are included. + + Before delving into the specific calls we need to discuss a variety of + data structures shared by the kernel and Venus. + + + + +4.1. Data structures shared by the kernel and Venus +---------------------------------------------------- + + + The CodaCred structure defines a variety of user and group ids as + they are set for the calling process. The vuid_t and vgid_t are 32 bit + unsigned integers. It also defines group membership in an array. On + Unix the CodaCred has proven sufficient to implement good security + semantics for Coda but the structure may have to undergo modification + for the Windows environment when these mature:: + + struct CodaCred { + vuid_t cr_uid, cr_euid, cr_suid, cr_fsuid; /* Real, effective, set, fs uid */ + vgid_t cr_gid, cr_egid, cr_sgid, cr_fsgid; /* same for groups */ + vgid_t cr_groups[NGROUPS]; /* Group membership for caller */ + }; + + + .. Note:: + + It is questionable if we need CodaCreds in Venus. Finally Venus + doesn't know about groups, although it does create files with the + default uid/gid. Perhaps the list of group membership is superfluous. + + + The next item is the fundamental identifier used to identify Coda + files, the ViceFid. A fid of a file uniquely defines a file or + directory in the Coda filesystem within a cell [1]_:: + + typedef struct ViceFid { + VolumeId Volume; + VnodeId Vnode; + Unique_t Unique; + } ViceFid; + + .. [1] A cell is agroup of Coda servers acting under the aegis of a single + system control machine or SCM. See the Coda Administration manual + for a detailed description of the role of the SCM. + + Each of the constituent fields: VolumeId, VnodeId and Unique_t are + unsigned 32 bit integers. We envisage that a further field will need + to be prefixed to identify the Coda cell; this will probably take the + form of a Ipv6 size IP address naming the Coda cell through DNS. + + The next important structure shared between Venus and the kernel is + the attributes of the file. The following structure is used to + exchange information. It has room for future extensions such as + support for device files (currently not present in Coda):: + + + struct coda_timespec { + int64_t tv_sec; /* seconds */ + long tv_nsec; /* nanoseconds */ + }; + + struct coda_vattr { + enum coda_vtype va_type; /* vnode type (for create) */ + u_short va_mode; /* files access mode and type */ + short va_nlink; /* number of references to file */ + vuid_t va_uid; /* owner user id */ + vgid_t va_gid; /* owner group id */ + long va_fsid; /* file system id (dev for now) */ + long va_fileid; /* file id */ + u_quad_t va_size; /* file size in bytes */ + long va_blocksize; /* blocksize preferred for i/o */ + struct coda_timespec va_atime; /* time of last access */ + struct coda_timespec va_mtime; /* time of last modification */ + struct coda_timespec va_ctime; /* time file changed */ + u_long va_gen; /* generation number of file */ + u_long va_flags; /* flags defined for file */ + dev_t va_rdev; /* device special file represents */ + u_quad_t va_bytes; /* bytes of disk space held by file */ + u_quad_t va_filerev; /* file modification number */ + u_int va_vaflags; /* operations flags, see below */ + long va_spare; /* remain quad aligned */ + }; + + +4.2. The pioctl interface +-------------------------- + + + Coda specific requests can be made by application through the pioctl + interface. The pioctl is implemented as an ordinary ioctl on a + fictitious file /coda/.CONTROL. The pioctl call opens this file, gets + a file handle and makes the ioctl call. Finally it closes the file. + + The kernel involvement in this is limited to providing the facility to + open and close and pass the ioctl message and to verify that a path in + the pioctl data buffers is a file in a Coda filesystem. + + The kernel is handed a data packet of the form:: + + struct { + const char *path; + struct ViceIoctl vidata; + int follow; + } data; + + + + where:: + + + struct ViceIoctl { + caddr_t in, out; /* Data to be transferred in, or out */ + short in_size; /* Size of input buffer <= 2K */ + short out_size; /* Maximum size of output buffer, <= 2K */ + }; + + + + The path must be a Coda file, otherwise the ioctl upcall will not be + made. + + .. Note:: The data structures and code are a mess. We need to clean this up. + + +**We now proceed to document the individual calls**: + + +4.3. root +---------- + + + Arguments + in + + empty + + out:: + + struct cfs_root_out { + ViceFid VFid; + } cfs_root; + + + + Description + This call is made to Venus during the initialization of + the Coda filesystem. If the result is zero, the cfs_root structure + contains the ViceFid of the root of the Coda filesystem. If a non-zero + result is generated, its value is a platform dependent error code + indicating the difficulty Venus encountered in locating the root of + the Coda filesystem. + +4.4. lookup +------------ + + + Summary + Find the ViceFid and type of an object in a directory if it exists. + + Arguments + in:: + + struct cfs_lookup_in { + ViceFid VFid; + char *name; /* Place holder for data. */ + } cfs_lookup; + + + + out:: + + struct cfs_lookup_out { + ViceFid VFid; + int vtype; + } cfs_lookup; + + + + Description + This call is made to determine the ViceFid and filetype of + a directory entry. The directory entry requested carries name name + and Venus will search the directory identified by cfs_lookup_in.VFid. + The result may indicate that the name does not exist, or that + difficulty was encountered in finding it (e.g. due to disconnection). + If the result is zero, the field cfs_lookup_out.VFid contains the + targets ViceFid and cfs_lookup_out.vtype the coda_vtype giving the + type of object the name designates. + + The name of the object is an 8 bit character string of maximum length + CFS_MAXNAMLEN, currently set to 256 (including a 0 terminator.) + + It is extremely important to realize that Venus bitwise ors the field + cfs_lookup.vtype with CFS_NOCACHE to indicate that the object should + not be put in the kernel name cache. + + .. Note:: + + The type of the vtype is currently wrong. It should be + coda_vtype. Linux does not take note of CFS_NOCACHE. It should. + + +4.5. getattr +------------- + + + Summary Get the attributes of a file. + + Arguments + in:: + + struct cfs_getattr_in { + ViceFid VFid; + struct coda_vattr attr; /* XXXXX */ + } cfs_getattr; + + + + out:: + + struct cfs_getattr_out { + struct coda_vattr attr; + } cfs_getattr; + + + + Description + This call returns the attributes of the file identified by fid. + + Errors + Errors can occur if the object with fid does not exist, is + unaccessible or if the caller does not have permission to fetch + attributes. + + .. Note:: + + Many kernel FS drivers (Linux, NT and Windows 95) need to acquire + the attributes as well as the Fid for the instantiation of an internal + "inode" or "FileHandle". A significant improvement in performance on + such systems could be made by combining the lookup and getattr calls + both at the Venus/kernel interaction level and at the RPC level. + + The vattr structure included in the input arguments is superfluous and + should be removed. + + +4.6. setattr +------------- + + + Summary + Set the attributes of a file. + + Arguments + in:: + + struct cfs_setattr_in { + ViceFid VFid; + struct coda_vattr attr; + } cfs_setattr; + + + + + out + + empty + + Description + The structure attr is filled with attributes to be changed + in BSD style. Attributes not to be changed are set to -1, apart from + vtype which is set to VNON. Other are set to the value to be assigned. + The only attributes which the FS driver may request to change are the + mode, owner, groupid, atime, mtime and ctime. The return value + indicates success or failure. + + Errors + A variety of errors can occur. The object may not exist, may + be inaccessible, or permission may not be granted by Venus. + + +4.7. access +------------ + + + Arguments + in:: + + struct cfs_access_in { + ViceFid VFid; + int flags; + } cfs_access; + + + + out + + empty + + Description + Verify if access to the object identified by VFid for + operations described by flags is permitted. The result indicates if + access will be granted. It is important to remember that Coda uses + ACLs to enforce protection and that ultimately the servers, not the + clients enforce the security of the system. The result of this call + will depend on whether a token is held by the user. + + Errors + The object may not exist, or the ACL describing the protection + may not be accessible. + + +4.8. create +------------ + + + Summary + Invoked to create a file + + Arguments + in:: + + struct cfs_create_in { + ViceFid VFid; + struct coda_vattr attr; + int excl; + int mode; + char *name; /* Place holder for data. */ + } cfs_create; + + + + + out:: + + struct cfs_create_out { + ViceFid VFid; + struct coda_vattr attr; + } cfs_create; + + + + Description + This upcall is invoked to request creation of a file. + The file will be created in the directory identified by VFid, its name + will be name, and the mode will be mode. If excl is set an error will + be returned if the file already exists. If the size field in attr is + set to zero the file will be truncated. The uid and gid of the file + are set by converting the CodaCred to a uid using a macro CRTOUID + (this macro is platform dependent). Upon success the VFid and + attributes of the file are returned. The Coda FS Driver will normally + instantiate a vnode, inode or file handle at kernel level for the new + object. + + + Errors + A variety of errors can occur. Permissions may be insufficient. + If the object exists and is not a file the error EISDIR is returned + under Unix. + + .. Note:: + + The packing of parameters is very inefficient and appears to + indicate confusion between the system call creat and the VFS operation + create. The VFS operation create is only called to create new objects. + This create call differs from the Unix one in that it is not invoked + to return a file descriptor. The truncate and exclusive options, + together with the mode, could simply be part of the mode as it is + under Unix. There should be no flags argument; this is used in open + (2) to return a file descriptor for READ or WRITE mode. + + The attributes of the directory should be returned too, since the size + and mtime changed. + + +4.9. mkdir +----------- + + + Summary + Create a new directory. + + Arguments + in:: + + struct cfs_mkdir_in { + ViceFid VFid; + struct coda_vattr attr; + char *name; /* Place holder for data. */ + } cfs_mkdir; + + + + out:: + + struct cfs_mkdir_out { + ViceFid VFid; + struct coda_vattr attr; + } cfs_mkdir; + + + + + Description + This call is similar to create but creates a directory. + Only the mode field in the input parameters is used for creation. + Upon successful creation, the attr returned contains the attributes of + the new directory. + + Errors + As for create. + + .. Note:: + + The input parameter should be changed to mode instead of + attributes. + + The attributes of the parent should be returned since the size and + mtime changes. + + +4.10. link +----------- + + + Summary + Create a link to an existing file. + + Arguments + in:: + + struct cfs_link_in { + ViceFid sourceFid; /* cnode to link *to* */ + ViceFid destFid; /* Directory in which to place link */ + char *tname; /* Place holder for data. */ + } cfs_link; + + + + out + + empty + + Description + This call creates a link to the sourceFid in the directory + identified by destFid with name tname. The source must reside in the + target's parent, i.e. the source must be have parent destFid, i.e. Coda + does not support cross directory hard links. Only the return value is + relevant. It indicates success or the type of failure. + + Errors + The usual errors can occur. + + +4.11. symlink +-------------- + + + Summary + create a symbolic link + + Arguments + in:: + + struct cfs_symlink_in { + ViceFid VFid; /* Directory to put symlink in */ + char *srcname; + struct coda_vattr attr; + char *tname; + } cfs_symlink; + + + + out + + none + + Description + Create a symbolic link. The link is to be placed in the + directory identified by VFid and named tname. It should point to the + pathname srcname. The attributes of the newly created object are to + be set to attr. + + .. Note:: + + The attributes of the target directory should be returned since + its size changed. + + +4.12. remove +------------- + + + Summary + Remove a file + + Arguments + in:: + + struct cfs_remove_in { + ViceFid VFid; + char *name; /* Place holder for data. */ + } cfs_remove; + + + + out + + none + + Description + Remove file named cfs_remove_in.name in directory + identified by VFid. + + + .. Note:: + + The attributes of the directory should be returned since its + mtime and size may change. + + +4.13. rmdir +------------ + + + Summary + Remove a directory + + Arguments + in:: + + struct cfs_rmdir_in { + ViceFid VFid; + char *name; /* Place holder for data. */ + } cfs_rmdir; + + + + out + + none + + Description + Remove the directory with name name from the directory + identified by VFid. + + .. Note:: The attributes of the parent directory should be returned since + its mtime and size may change. + + +4.14. readlink +--------------- + + + Summary + Read the value of a symbolic link. + + Arguments + in:: + + struct cfs_readlink_in { + ViceFid VFid; + } cfs_readlink; + + + + out:: + + struct cfs_readlink_out { + int count; + caddr_t data; /* Place holder for data. */ + } cfs_readlink; + + + + Description + This routine reads the contents of symbolic link + identified by VFid into the buffer data. The buffer data must be able + to hold any name up to CFS_MAXNAMLEN (PATH or NAM??). + + Errors + No unusual errors. + + +4.15. open +----------- + + + Summary + Open a file. + + Arguments + in:: + + struct cfs_open_in { + ViceFid VFid; + int flags; + } cfs_open; + + + + out:: + + struct cfs_open_out { + dev_t dev; + ino_t inode; + } cfs_open; + + + + Description + This request asks Venus to place the file identified by + VFid in its cache and to note that the calling process wishes to open + it with flags as in open(2). The return value to the kernel differs + for Unix and Windows systems. For Unix systems the Coda FS Driver is + informed of the device and inode number of the container file in the + fields dev and inode. For Windows the path of the container file is + returned to the kernel. + + + .. Note:: + + Currently the cfs_open_out structure is not properly adapted to + deal with the Windows case. It might be best to implement two + upcalls, one to open aiming at a container file name, the other at a + container file inode. + + +4.16. close +------------ + + + Summary + Close a file, update it on the servers. + + Arguments + in:: + + struct cfs_close_in { + ViceFid VFid; + int flags; + } cfs_close; + + + + out + + none + + Description + Close the file identified by VFid. + + .. Note:: + + The flags argument is bogus and not used. However, Venus' code + has room to deal with an execp input field, probably this field should + be used to inform Venus that the file was closed but is still memory + mapped for execution. There are comments about fetching versus not + fetching the data in Venus vproc_vfscalls. This seems silly. If a + file is being closed, the data in the container file is to be the new + data. Here again the execp flag might be in play to create confusion: + currently Venus might think a file can be flushed from the cache when + it is still memory mapped. This needs to be understood. + + +4.17. ioctl +------------ + + + Summary + Do an ioctl on a file. This includes the pioctl interface. + + Arguments + in:: + + struct cfs_ioctl_in { + ViceFid VFid; + int cmd; + int len; + int rwflag; + char *data; /* Place holder for data. */ + } cfs_ioctl; + + + + out:: + + + struct cfs_ioctl_out { + int len; + caddr_t data; /* Place holder for data. */ + } cfs_ioctl; + + + + Description + Do an ioctl operation on a file. The command, len and + data arguments are filled as usual. flags is not used by Venus. + + .. Note:: + + Another bogus parameter. flags is not used. What is the + business about PREFETCHING in the Venus code? + + + +4.18. rename +------------- + + + Summary + Rename a fid. + + Arguments + in:: + + struct cfs_rename_in { + ViceFid sourceFid; + char *srcname; + ViceFid destFid; + char *destname; + } cfs_rename; + + + + out + + none + + Description + Rename the object with name srcname in directory + sourceFid to destname in destFid. It is important that the names + srcname and destname are 0 terminated strings. Strings in Unix + kernels are not always null terminated. + + +4.19. readdir +-------------- + + + Summary + Read directory entries. + + Arguments + in:: + + struct cfs_readdir_in { + ViceFid VFid; + int count; + int offset; + } cfs_readdir; + + + + + out:: + + struct cfs_readdir_out { + int size; + caddr_t data; /* Place holder for data. */ + } cfs_readdir; + + + + Description + Read directory entries from VFid starting at offset and + read at most count bytes. Returns the data in data and returns + the size in size. + + + .. Note:: + + This call is not used. Readdir operations exploit container + files. We will re-evaluate this during the directory revamp which is + about to take place. + + +4.20. vget +----------- + + + Summary + instructs Venus to do an FSDB->Get. + + Arguments + in:: + + struct cfs_vget_in { + ViceFid VFid; + } cfs_vget; + + + + out:: + + struct cfs_vget_out { + ViceFid VFid; + int vtype; + } cfs_vget; + + + + Description + This upcall asks Venus to do a get operation on an fsobj + labelled by VFid. + + .. Note:: + + This operation is not used. However, it is extremely useful + since it can be used to deal with read/write memory mapped files. + These can be "pinned" in the Venus cache using vget and released with + inactive. + + +4.21. fsync +------------ + + + Summary + Tell Venus to update the RVM attributes of a file. + + Arguments + in:: + + struct cfs_fsync_in { + ViceFid VFid; + } cfs_fsync; + + + + out + + none + + Description + Ask Venus to update RVM attributes of object VFid. This + should be called as part of kernel level fsync type calls. The + result indicates if the syncing was successful. + + .. Note:: Linux does not implement this call. It should. + + +4.22. inactive +--------------- + + + Summary + Tell Venus a vnode is no longer in use. + + Arguments + in:: + + struct cfs_inactive_in { + ViceFid VFid; + } cfs_inactive; + + + + out + + none + + Description + This operation returns EOPNOTSUPP. + + .. Note:: This should perhaps be removed. + + +4.23. rdwr +----------- + + + Summary + Read or write from a file + + Arguments + in:: + + struct cfs_rdwr_in { + ViceFid VFid; + int rwflag; + int count; + int offset; + int ioflag; + caddr_t data; /* Place holder for data. */ + } cfs_rdwr; + + + + + out:: + + struct cfs_rdwr_out { + int rwflag; + int count; + caddr_t data; /* Place holder for data. */ + } cfs_rdwr; + + + + Description + This upcall asks Venus to read or write from a file. + + + .. Note:: + + It should be removed since it is against the Coda philosophy that + read/write operations never reach Venus. I have been told the + operation does not work. It is not currently used. + + + +4.24. odymount +--------------- + + + Summary + Allows mounting multiple Coda "filesystems" on one Unix mount point. + + Arguments + in:: + + struct ody_mount_in { + char *name; /* Place holder for data. */ + } ody_mount; + + + + out:: + + struct ody_mount_out { + ViceFid VFid; + } ody_mount; + + + + Description + Asks Venus to return the rootfid of a Coda system named + name. The fid is returned in VFid. + + .. Note:: + + This call was used by David for dynamic sets. It should be + removed since it causes a jungle of pointers in the VFS mounting area. + It is not used by Coda proper. Call is not implemented by Venus. + + +4.25. ody_lookup +----------------- + + + Summary + Looks up something. + + Arguments + in + + irrelevant + + + out + + irrelevant + + + .. Note:: Gut it. Call is not implemented by Venus. + + +4.26. ody_expand +----------------- + + + Summary + expands something in a dynamic set. + + Arguments + in + + irrelevant + + out + + irrelevant + + .. Note:: Gut it. Call is not implemented by Venus. + + +4.27. prefetch +--------------- + + + Summary + Prefetch a dynamic set. + + Arguments + + in + + Not documented. + + out + + Not documented. + + Description + Venus worker.cc has support for this call, although it is + noted that it doesn't work. Not surprising, since the kernel does not + have support for it. (ODY_PREFETCH is not a defined operation). + + + .. Note:: Gut it. It isn't working and isn't used by Coda. + + + +4.28. signal +------------- + + + Summary + Send Venus a signal about an upcall. + + Arguments + in + + none + + out + + not applicable. + + Description + This is an out-of-band upcall to Venus to inform Venus + that the calling process received a signal after Venus read the + message from the input queue. Venus is supposed to clean up the + operation. + + Errors + No reply is given. + + .. Note:: + + We need to better understand what Venus needs to clean up and if + it is doing this correctly. Also we need to handle multiple upcall + per system call situations correctly. It would be important to know + what state changes in Venus take place after an upcall for which the + kernel is responsible for notifying Venus to clean up (e.g. open + definitely is such a state change, but many others are maybe not). + + +5. The minicache and downcalls +=============================== + + + The Coda FS Driver can cache results of lookup and access upcalls, to + limit the frequency of upcalls. Upcalls carry a price since a process + context switch needs to take place. The counterpart of caching the + information is that Venus will notify the FS Driver that cached + entries must be flushed or renamed. + + The kernel code generally has to maintain a structure which links the + internal file handles (called vnodes in BSD, inodes in Linux and + FileHandles in Windows) with the ViceFid's which Venus maintains. The + reason is that frequent translations back and forth are needed in + order to make upcalls and use the results of upcalls. Such linking + objects are called cnodes. + + The current minicache implementations have cache entries which record + the following: + + 1. the name of the file + + 2. the cnode of the directory containing the object + + 3. a list of CodaCred's for which the lookup is permitted. + + 4. the cnode of the object + + The lookup call in the Coda FS Driver may request the cnode of the + desired object from the cache, by passing its name, directory and the + CodaCred's of the caller. The cache will return the cnode or indicate + that it cannot be found. The Coda FS Driver must be careful to + invalidate cache entries when it modifies or removes objects. + + When Venus obtains information that indicates that cache entries are + no longer valid, it will make a downcall to the kernel. Downcalls are + intercepted by the Coda FS Driver and lead to cache invalidations of + the kind described below. The Coda FS Driver does not return an error + unless the downcall data could not be read into kernel memory. + + +5.1. INVALIDATE +---------------- + + + No information is available on this call. + + +5.2. FLUSH +----------- + + + + Arguments + None + + Summary + Flush the name cache entirely. + + Description + Venus issues this call upon startup and when it dies. This + is to prevent stale cache information being held. Some operating + systems allow the kernel name cache to be switched off dynamically. + When this is done, this downcall is made. + + +5.3. PURGEUSER +--------------- + + + Arguments + :: + + struct cfs_purgeuser_out {/* CFS_PURGEUSER is a venus->kernel call */ + struct CodaCred cred; + } cfs_purgeuser; + + + + Description + Remove all entries in the cache carrying the Cred. This + call is issued when tokens for a user expire or are flushed. + + +5.4. ZAPFILE +------------- + + + Arguments + :: + + struct cfs_zapfile_out { /* CFS_ZAPFILE is a venus->kernel call */ + ViceFid CodaFid; + } cfs_zapfile; + + + + Description + Remove all entries which have the (dir vnode, name) pair. + This is issued as a result of an invalidation of cached attributes of + a vnode. + + .. Note:: + + Call is not named correctly in NetBSD and Mach. The minicache + zapfile routine takes different arguments. Linux does not implement + the invalidation of attributes correctly. + + + +5.5. ZAPDIR +------------ + + + Arguments + :: + + struct cfs_zapdir_out { /* CFS_ZAPDIR is a venus->kernel call */ + ViceFid CodaFid; + } cfs_zapdir; + + + + Description + Remove all entries in the cache lying in a directory + CodaFid, and all children of this directory. This call is issued when + Venus receives a callback on the directory. + + +5.6. ZAPVNODE +-------------- + + + + Arguments + :: + + struct cfs_zapvnode_out { /* CFS_ZAPVNODE is a venus->kernel call */ + struct CodaCred cred; + ViceFid VFid; + } cfs_zapvnode; + + + + Description + Remove all entries in the cache carrying the cred and VFid + as in the arguments. This downcall is probably never issued. + + +5.7. PURGEFID +-------------- + + + Arguments + :: + + struct cfs_purgefid_out { /* CFS_PURGEFID is a venus->kernel call */ + ViceFid CodaFid; + } cfs_purgefid; + + + + Description + Flush the attribute for the file. If it is a dir (odd + vnode), purge its children from the namecache and remove the file from the + namecache. + + + +5.8. REPLACE +------------- + + + Summary + Replace the Fid's for a collection of names. + + Arguments + :: + + struct cfs_replace_out { /* cfs_replace is a venus->kernel call */ + ViceFid NewFid; + ViceFid OldFid; + } cfs_replace; + + + + Description + This routine replaces a ViceFid in the name cache with + another. It is added to allow Venus during reintegration to replace + locally allocated temp fids while disconnected with global fids even + when the reference counts on those fids are not zero. + + +6. Initialization and cleanup +============================== + + + This section gives brief hints as to desirable features for the Coda + FS Driver at startup and upon shutdown or Venus failures. Before + entering the discussion it is useful to repeat that the Coda FS Driver + maintains the following data: + + + 1. message queues + + 2. cnodes + + 3. name cache entries + + The name cache entries are entirely private to the driver, so they + can easily be manipulated. The message queues will generally have + clear points of initialization and destruction. The cnodes are + much more delicate. User processes hold reference counts in Coda + filesystems and it can be difficult to clean up the cnodes. + + It can expect requests through: + + 1. the message subsystem + + 2. the VFS layer + + 3. pioctl interface + + Currently the pioctl passes through the VFS for Coda so we can + treat these similarly. + + +6.1. Requirements +------------------ + + + The following requirements should be accommodated: + + 1. The message queues should have open and close routines. On Unix + the opening of the character devices are such routines. + + - Before opening, no messages can be placed. + + - Opening will remove any old messages still pending. + + - Close will notify any sleeping processes that their upcall cannot + be completed. + + - Close will free all memory allocated by the message queues. + + + 2. At open the namecache shall be initialized to empty state. + + 3. Before the message queues are open, all VFS operations will fail. + Fortunately this can be achieved by making sure than mounting the + Coda filesystem cannot succeed before opening. + + 4. After closing of the queues, no VFS operations can succeed. Here + one needs to be careful, since a few operations (lookup, + read/write, readdir) can proceed without upcalls. These must be + explicitly blocked. + + 5. Upon closing the namecache shall be flushed and disabled. + + 6. All memory held by cnodes can be freed without relying on upcalls. + + 7. Unmounting the file system can be done without relying on upcalls. + + 8. Mounting the Coda filesystem should fail gracefully if Venus cannot + get the rootfid or the attributes of the rootfid. The latter is + best implemented by Venus fetching these objects before attempting + to mount. + + .. Note:: + + NetBSD in particular but also Linux have not implemented the + above requirements fully. For smooth operation this needs to be + corrected. + + + diff --git a/Documentation/filesystems/coda.txt b/Documentation/filesystems/coda.txt deleted file mode 100644 index 1711ad48e38a..000000000000 --- a/Documentation/filesystems/coda.txt +++ /dev/null @@ -1,1676 +0,0 @@ -NOTE: -This is one of the technical documents describing a component of -Coda -- this document describes the client kernel-Venus interface. - -For more information: - http://www.coda.cs.cmu.edu -For user level software needed to run Coda: - ftp://ftp.coda.cs.cmu.edu - -To run Coda you need to get a user level cache manager for the client, -named Venus, as well as tools to manipulate ACLs, to log in, etc. The -client needs to have the Coda filesystem selected in the kernel -configuration. - -The server needs a user level server and at present does not depend on -kernel support. - - - - - - - - The Venus kernel interface - Peter J. Braam - v1.0, Nov 9, 1997 - - This document describes the communication between Venus and kernel - level filesystem code needed for the operation of the Coda file sys- - tem. This document version is meant to describe the current interface - (version 1.0) as well as improvements we envisage. - ______________________________________________________________________ - - Table of Contents - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1. Introduction - - 2. Servicing Coda filesystem calls - - 3. The message layer - - 3.1 Implementation details - - 4. The interface at the call level - - 4.1 Data structures shared by the kernel and Venus - 4.2 The pioctl interface - 4.3 root - 4.4 lookup - 4.5 getattr - 4.6 setattr - 4.7 access - 4.8 create - 4.9 mkdir - 4.10 link - 4.11 symlink - 4.12 remove - 4.13 rmdir - 4.14 readlink - 4.15 open - 4.16 close - 4.17 ioctl - 4.18 rename - 4.19 readdir - 4.20 vget - 4.21 fsync - 4.22 inactive - 4.23 rdwr - 4.24 odymount - 4.25 ody_lookup - 4.26 ody_expand - 4.27 prefetch - 4.28 signal - - 5. The minicache and downcalls - - 5.1 INVALIDATE - 5.2 FLUSH - 5.3 PURGEUSER - 5.4 ZAPFILE - 5.5 ZAPDIR - 5.6 ZAPVNODE - 5.7 PURGEFID - 5.8 REPLACE - - 6. Initialization and cleanup - - 6.1 Requirements - - - ______________________________________________________________________ - 0wpage - - 11.. IInnttrroodduuccttiioonn - - - - A key component in the Coda Distributed File System is the cache - manager, _V_e_n_u_s. - - - When processes on a Coda enabled system access files in the Coda - filesystem, requests are directed at the filesystem layer in the - operating system. The operating system will communicate with Venus to - service the request for the process. Venus manages a persistent - client cache and makes remote procedure calls to Coda file servers and - related servers (such as authentication servers) to service these - requests it receives from the operating system. When Venus has - serviced a request it replies to the operating system with appropriate - return codes, and other data related to the request. Optionally the - kernel support for Coda may maintain a minicache of recently processed - requests to limit the number of interactions with Venus. Venus - possesses the facility to inform the kernel when elements from its - minicache are no longer valid. - - This document describes precisely this communication between the - kernel and Venus. The definitions of so called upcalls and downcalls - will be given with the format of the data they handle. We shall also - describe the semantic invariants resulting from the calls. - - Historically Coda was implemented in a BSD file system in Mach 2.6. - The interface between the kernel and Venus is very similar to the BSD - VFS interface. Similar functionality is provided, and the format of - the parameters and returned data is very similar to the BSD VFS. This - leads to an almost natural environment for implementing a kernel-level - filesystem driver for Coda in a BSD system. However, other operating - systems such as Linux and Windows 95 and NT have virtual filesystem - with different interfaces. - - To implement Coda on these systems some reverse engineering of the - Venus/Kernel protocol is necessary. Also it came to light that other - systems could profit significantly from certain small optimizations - and modifications to the protocol. To facilitate this work as well as - to make future ports easier, communication between Venus and the - kernel should be documented in great detail. This is the aim of this - document. - - 0wpage - - 22.. SSeerrvviicciinngg CCooddaa ffiilleessyysstteemm ccaallllss - - The service of a request for a Coda file system service originates in - a process PP which accessing a Coda file. It makes a system call which - traps to the OS kernel. Examples of such calls trapping to the kernel - are _r_e_a_d_, _w_r_i_t_e_, _o_p_e_n_, _c_l_o_s_e_, _c_r_e_a_t_e_, _m_k_d_i_r_, _r_m_d_i_r_, _c_h_m_o_d in a Unix - context. Similar calls exist in the Win32 environment, and are named - _C_r_e_a_t_e_F_i_l_e_, . - - Generally the operating system handles the request in a virtual - filesystem (VFS) layer, which is named I/O Manager in NT and IFS - manager in Windows 95. The VFS is responsible for partial processing - of the request and for locating the specific filesystem(s) which will - service parts of the request. Usually the information in the path - assists in locating the correct FS drivers. Sometimes after extensive - pre-processing, the VFS starts invoking exported routines in the FS - driver. This is the point where the FS specific processing of the - request starts, and here the Coda specific kernel code comes into - play. - - The FS layer for Coda must expose and implement several interfaces. - First and foremost the VFS must be able to make all necessary calls to - the Coda FS layer, so the Coda FS driver must expose the VFS interface - as applicable in the operating system. These differ very significantly - among operating systems, but share features such as facilities to - read/write and create and remove objects. The Coda FS layer services - such VFS requests by invoking one or more well defined services - offered by the cache manager Venus. When the replies from Venus have - come back to the FS driver, servicing of the VFS call continues and - finishes with a reply to the kernel's VFS. Finally the VFS layer - returns to the process. - - As a result of this design a basic interface exposed by the FS driver - must allow Venus to manage message traffic. In particular Venus must - be able to retrieve and place messages and to be notified of the - arrival of a new message. The notification must be through a mechanism - which does not block Venus since Venus must attend to other tasks even - when no messages are waiting or being processed. - - - - - - - Interfaces of the Coda FS Driver - - Furthermore the FS layer provides for a special path of communication - between a user process and Venus, called the pioctl interface. The - pioctl interface is used for Coda specific services, such as - requesting detailed information about the persistent cache managed by - Venus. Here the involvement of the kernel is minimal. It identifies - the calling process and passes the information on to Venus. When - Venus replies the response is passed back to the caller in unmodified - form. - - Finally Venus allows the kernel FS driver to cache the results from - certain services. This is done to avoid excessive context switches - and results in an efficient system. However, Venus may acquire - information, for example from the network which implies that cached - information must be flushed or replaced. Venus then makes a downcall - to the Coda FS layer to request flushes or updates in the cache. The - kernel FS driver handles such requests synchronously. - - Among these interfaces the VFS interface and the facility to place, - receive and be notified of messages are platform specific. We will - not go into the calls exported to the VFS layer but we will state the - requirements of the message exchange mechanism. - - 0wpage - - 33.. TThhee mmeessssaaggee llaayyeerr - - - - At the lowest level the communication between Venus and the FS driver - proceeds through messages. The synchronization between processes - requesting Coda file service and Venus relies on blocking and waking - up processes. The Coda FS driver processes VFS- and pioctl-requests - on behalf of a process P, creates messages for Venus, awaits replies - and finally returns to the caller. The implementation of the exchange - of messages is platform specific, but the semantics have (so far) - appeared to be generally applicable. Data buffers are created by the - FS Driver in kernel memory on behalf of P and copied to user memory in - Venus. - - The FS Driver while servicing P makes upcalls to Venus. Such an - upcall is dispatched to Venus by creating a message structure. The - structure contains the identification of P, the message sequence - number, the size of the request and a pointer to the data in kernel - memory for the request. Since the data buffer is re-used to hold the - reply from Venus, there is a field for the size of the reply. A flags - field is used in the message to precisely record the status of the - message. Additional platform dependent structures involve pointers to - determine the position of the message on queues and pointers to - synchronization objects. In the upcall routine the message structure - is filled in, flags are set to 0, and it is placed on the _p_e_n_d_i_n_g - queue. The routine calling upcall is responsible for allocating the - data buffer; its structure will be described in the next section. - - A facility must exist to notify Venus that the message has been - created, and implemented using available synchronization objects in - the OS. This notification is done in the upcall context of the process - P. When the message is on the pending queue, process P cannot proceed - in upcall. The (kernel mode) processing of P in the filesystem - request routine must be suspended until Venus has replied. Therefore - the calling thread in P is blocked in upcall. A pointer in the - message structure will locate the synchronization object on which P is - sleeping. - - Venus detects the notification that a message has arrived, and the FS - driver allow Venus to retrieve the message with a getmsg_from_kernel - call. This action finishes in the kernel by putting the message on the - queue of processing messages and setting flags to READ. Venus is - passed the contents of the data buffer. The getmsg_from_kernel call - now returns and Venus processes the request. - - At some later point the FS driver receives a message from Venus, - namely when Venus calls sendmsg_to_kernel. At this moment the Coda FS - driver looks at the contents of the message and decides if: - - - +o the message is a reply for a suspended thread P. If so it removes - the message from the processing queue and marks the message as - WRITTEN. Finally, the FS driver unblocks P (still in the kernel - mode context of Venus) and the sendmsg_to_kernel call returns to - Venus. The process P will be scheduled at some point and continues - processing its upcall with the data buffer replaced with the reply - from Venus. - - +o The message is a _d_o_w_n_c_a_l_l. A downcall is a request from Venus to - the FS Driver. The FS driver processes the request immediately - (usually a cache eviction or replacement) and when it finishes - sendmsg_to_kernel returns. - - Now P awakes and continues processing upcall. There are some - subtleties to take account of. First P will determine if it was woken - up in upcall by a signal from some other source (for example an - attempt to terminate P) or as is normally the case by Venus in its - sendmsg_to_kernel call. In the normal case, the upcall routine will - deallocate the message structure and return. The FS routine can proceed - with its processing. - - - - - - - - Sleeping and IPC arrangements - - In case P is woken up by a signal and not by Venus, it will first look - at the flags field. If the message is not yet READ, the process P can - handle its signal without notifying Venus. If Venus has READ, and - the request should not be processed, P can send Venus a signal message - to indicate that it should disregard the previous message. Such - signals are put in the queue at the head, and read first by Venus. If - the message is already marked as WRITTEN it is too late to stop the - processing. The VFS routine will now continue. (-- If a VFS request - involves more than one upcall, this can lead to complicated state, an - extra field "handle_signals" could be added in the message structure - to indicate points of no return have been passed.--) - - - - 33..11.. IImmpplleemmeennttaattiioonn ddeettaaiillss - - The Unix implementation of this mechanism has been through the - implementation of a character device associated with Coda. Venus - retrieves messages by doing a read on the device, replies are sent - with a write and notification is through the select system call on the - file descriptor for the device. The process P is kept waiting on an - interruptible wait queue object. - - In Windows NT and the DPMI Windows 95 implementation a DeviceIoControl - call is used. The DeviceIoControl call is designed to copy buffers - from user memory to kernel memory with OPCODES. The sendmsg_to_kernel - is issued as a synchronous call, while the getmsg_from_kernel call is - asynchronous. Windows EventObjects are used for notification of - message arrival. The process P is kept waiting on a KernelEvent - object in NT and a semaphore in Windows 95. - - 0wpage - - 44.. TThhee iinntteerrffaaccee aatt tthhee ccaallll lleevveell - - - This section describes the upcalls a Coda FS driver can make to Venus. - Each of these upcalls make use of two structures: inputArgs and - outputArgs. In pseudo BNF form the structures take the following - form: - - - struct inputArgs { - u_long opcode; - u_long unique; /* Keep multiple outstanding msgs distinct */ - u_short pid; /* Common to all */ - u_short pgid; /* Common to all */ - struct CodaCred cred; /* Common to all */ - - - }; - - struct outputArgs { - u_long opcode; - u_long unique; /* Keep multiple outstanding msgs distinct */ - u_long result; - - - }; - - - - Before going on let us elucidate the role of the various fields. The - inputArgs start with the opcode which defines the type of service - requested from Venus. There are approximately 30 upcalls at present - which we will discuss. The unique field labels the inputArg with a - unique number which will identify the message uniquely. A process and - process group id are passed. Finally the credentials of the caller - are included. - - Before delving into the specific calls we need to discuss a variety of - data structures shared by the kernel and Venus. - - - - - 44..11.. DDaattaa ssttrruuccttuurreess sshhaarreedd bbyy tthhee kkeerrnneell aanndd VVeennuuss - - - The CodaCred structure defines a variety of user and group ids as - they are set for the calling process. The vuid_t and vgid_t are 32 bit - unsigned integers. It also defines group membership in an array. On - Unix the CodaCred has proven sufficient to implement good security - semantics for Coda but the structure may have to undergo modification - for the Windows environment when these mature. - - struct CodaCred { - vuid_t cr_uid, cr_euid, cr_suid, cr_fsuid; /* Real, effective, set, fs uid */ - vgid_t cr_gid, cr_egid, cr_sgid, cr_fsgid; /* same for groups */ - vgid_t cr_groups[NGROUPS]; /* Group membership for caller */ - }; - - - - NNOOTTEE It is questionable if we need CodaCreds in Venus. Finally Venus - doesn't know about groups, although it does create files with the - default uid/gid. Perhaps the list of group membership is superfluous. - - - The next item is the fundamental identifier used to identify Coda - files, the ViceFid. A fid of a file uniquely defines a file or - directory in the Coda filesystem within a _c_e_l_l. (-- A _c_e_l_l is a - group of Coda servers acting under the aegis of a single system - control machine or SCM. See the Coda Administration manual for a - detailed description of the role of the SCM.--) - - - typedef struct ViceFid { - VolumeId Volume; - VnodeId Vnode; - Unique_t Unique; - } ViceFid; - - - - Each of the constituent fields: VolumeId, VnodeId and Unique_t are - unsigned 32 bit integers. We envisage that a further field will need - to be prefixed to identify the Coda cell; this will probably take the - form of a Ipv6 size IP address naming the Coda cell through DNS. - - The next important structure shared between Venus and the kernel is - the attributes of the file. The following structure is used to - exchange information. It has room for future extensions such as - support for device files (currently not present in Coda). - - - - - - - - - - - - - - - - - struct coda_timespec { - int64_t tv_sec; /* seconds */ - long tv_nsec; /* nanoseconds */ - }; - - struct coda_vattr { - enum coda_vtype va_type; /* vnode type (for create) */ - u_short va_mode; /* files access mode and type */ - short va_nlink; /* number of references to file */ - vuid_t va_uid; /* owner user id */ - vgid_t va_gid; /* owner group id */ - long va_fsid; /* file system id (dev for now) */ - long va_fileid; /* file id */ - u_quad_t va_size; /* file size in bytes */ - long va_blocksize; /* blocksize preferred for i/o */ - struct coda_timespec va_atime; /* time of last access */ - struct coda_timespec va_mtime; /* time of last modification */ - struct coda_timespec va_ctime; /* time file changed */ - u_long va_gen; /* generation number of file */ - u_long va_flags; /* flags defined for file */ - dev_t va_rdev; /* device special file represents */ - u_quad_t va_bytes; /* bytes of disk space held by file */ - u_quad_t va_filerev; /* file modification number */ - u_int va_vaflags; /* operations flags, see below */ - long va_spare; /* remain quad aligned */ - }; - - - - - 44..22.. TThhee ppiiooccttll iinntteerrffaaccee - - - Coda specific requests can be made by application through the pioctl - interface. The pioctl is implemented as an ordinary ioctl on a - fictitious file /coda/.CONTROL. The pioctl call opens this file, gets - a file handle and makes the ioctl call. Finally it closes the file. - - The kernel involvement in this is limited to providing the facility to - open and close and pass the ioctl message _a_n_d to verify that a path in - the pioctl data buffers is a file in a Coda filesystem. - - The kernel is handed a data packet of the form: - - struct { - const char *path; - struct ViceIoctl vidata; - int follow; - } data; - - - - where - - - struct ViceIoctl { - caddr_t in, out; /* Data to be transferred in, or out */ - short in_size; /* Size of input buffer <= 2K */ - short out_size; /* Maximum size of output buffer, <= 2K */ - }; - - - - The path must be a Coda file, otherwise the ioctl upcall will not be - made. - - NNOOTTEE The data structures and code are a mess. We need to clean this - up. - - We now proceed to document the individual calls: - - 0wpage - - 44..33.. rroooott - - - AArrgguummeennttss - - iinn empty - - oouutt - - struct cfs_root_out { - ViceFid VFid; - } cfs_root; - - - - DDeessccrriippttiioonn This call is made to Venus during the initialization of - the Coda filesystem. If the result is zero, the cfs_root structure - contains the ViceFid of the root of the Coda filesystem. If a non-zero - result is generated, its value is a platform dependent error code - indicating the difficulty Venus encountered in locating the root of - the Coda filesystem. - - 0wpage - - 44..44.. llooookkuupp - - - SSuummmmaarryy Find the ViceFid and type of an object in a directory if it - exists. - - AArrgguummeennttss - - iinn - - struct cfs_lookup_in { - ViceFid VFid; - char *name; /* Place holder for data. */ - } cfs_lookup; - - - - oouutt - - struct cfs_lookup_out { - ViceFid VFid; - int vtype; - } cfs_lookup; - - - - DDeessccrriippttiioonn This call is made to determine the ViceFid and filetype of - a directory entry. The directory entry requested carries name name - and Venus will search the directory identified by cfs_lookup_in.VFid. - The result may indicate that the name does not exist, or that - difficulty was encountered in finding it (e.g. due to disconnection). - If the result is zero, the field cfs_lookup_out.VFid contains the - targets ViceFid and cfs_lookup_out.vtype the coda_vtype giving the - type of object the name designates. - - The name of the object is an 8 bit character string of maximum length - CFS_MAXNAMLEN, currently set to 256 (including a 0 terminator.) - - It is extremely important to realize that Venus bitwise ors the field - cfs_lookup.vtype with CFS_NOCACHE to indicate that the object should - not be put in the kernel name cache. - - NNOOTTEE The type of the vtype is currently wrong. It should be - coda_vtype. Linux does not take note of CFS_NOCACHE. It should. - - 0wpage - - 44..55.. ggeettaattttrr - - - SSuummmmaarryy Get the attributes of a file. - - AArrgguummeennttss - - iinn - - struct cfs_getattr_in { - ViceFid VFid; - struct coda_vattr attr; /* XXXXX */ - } cfs_getattr; - - - - oouutt - - struct cfs_getattr_out { - struct coda_vattr attr; - } cfs_getattr; - - - - DDeessccrriippttiioonn This call returns the attributes of the file identified by - fid. - - EErrrroorrss Errors can occur if the object with fid does not exist, is - unaccessible or if the caller does not have permission to fetch - attributes. - - NNoottee Many kernel FS drivers (Linux, NT and Windows 95) need to acquire - the attributes as well as the Fid for the instantiation of an internal - "inode" or "FileHandle". A significant improvement in performance on - such systems could be made by combining the _l_o_o_k_u_p and _g_e_t_a_t_t_r calls - both at the Venus/kernel interaction level and at the RPC level. - - The vattr structure included in the input arguments is superfluous and - should be removed. - - 0wpage - - 44..66.. sseettaattttrr - - - SSuummmmaarryy Set the attributes of a file. - - AArrgguummeennttss - - iinn - - struct cfs_setattr_in { - ViceFid VFid; - struct coda_vattr attr; - } cfs_setattr; - - - - - oouutt - empty - - DDeessccrriippttiioonn The structure attr is filled with attributes to be changed - in BSD style. Attributes not to be changed are set to -1, apart from - vtype which is set to VNON. Other are set to the value to be assigned. - The only attributes which the FS driver may request to change are the - mode, owner, groupid, atime, mtime and ctime. The return value - indicates success or failure. - - EErrrroorrss A variety of errors can occur. The object may not exist, may - be inaccessible, or permission may not be granted by Venus. - - 0wpage - - 44..77.. aacccceessss - - - SSuummmmaarryy - - AArrgguummeennttss - - iinn - - struct cfs_access_in { - ViceFid VFid; - int flags; - } cfs_access; - - - - oouutt - empty - - DDeessccrriippttiioonn Verify if access to the object identified by VFid for - operations described by flags is permitted. The result indicates if - access will be granted. It is important to remember that Coda uses - ACLs to enforce protection and that ultimately the servers, not the - clients enforce the security of the system. The result of this call - will depend on whether a _t_o_k_e_n is held by the user. - - EErrrroorrss The object may not exist, or the ACL describing the protection - may not be accessible. - - 0wpage - - 44..88.. ccrreeaattee - - - SSuummmmaarryy Invoked to create a file - - AArrgguummeennttss - - iinn - - struct cfs_create_in { - ViceFid VFid; - struct coda_vattr attr; - int excl; - int mode; - char *name; /* Place holder for data. */ - } cfs_create; - - - - - oouutt - - struct cfs_create_out { - ViceFid VFid; - struct coda_vattr attr; - } cfs_create; - - - - DDeessccrriippttiioonn This upcall is invoked to request creation of a file. - The file will be created in the directory identified by VFid, its name - will be name, and the mode will be mode. If excl is set an error will - be returned if the file already exists. If the size field in attr is - set to zero the file will be truncated. The uid and gid of the file - are set by converting the CodaCred to a uid using a macro CRTOUID - (this macro is platform dependent). Upon success the VFid and - attributes of the file are returned. The Coda FS Driver will normally - instantiate a vnode, inode or file handle at kernel level for the new - object. - - - EErrrroorrss A variety of errors can occur. Permissions may be insufficient. - If the object exists and is not a file the error EISDIR is returned - under Unix. - - NNOOTTEE The packing of parameters is very inefficient and appears to - indicate confusion between the system call creat and the VFS operation - create. The VFS operation create is only called to create new objects. - This create call differs from the Unix one in that it is not invoked - to return a file descriptor. The truncate and exclusive options, - together with the mode, could simply be part of the mode as it is - under Unix. There should be no flags argument; this is used in open - (2) to return a file descriptor for READ or WRITE mode. - - The attributes of the directory should be returned too, since the size - and mtime changed. - - 0wpage - - 44..99.. mmkkddiirr - - - SSuummmmaarryy Create a new directory. - - AArrgguummeennttss - - iinn - - struct cfs_mkdir_in { - ViceFid VFid; - struct coda_vattr attr; - char *name; /* Place holder for data. */ - } cfs_mkdir; - - - - oouutt - - struct cfs_mkdir_out { - ViceFid VFid; - struct coda_vattr attr; - } cfs_mkdir; - - - - - DDeessccrriippttiioonn This call is similar to create but creates a directory. - Only the mode field in the input parameters is used for creation. - Upon successful creation, the attr returned contains the attributes of - the new directory. - - EErrrroorrss As for create. - - NNOOTTEE The input parameter should be changed to mode instead of - attributes. - - The attributes of the parent should be returned since the size and - mtime changes. - - 0wpage - - 44..1100.. lliinnkk - - - SSuummmmaarryy Create a link to an existing file. - - AArrgguummeennttss - - iinn - - struct cfs_link_in { - ViceFid sourceFid; /* cnode to link *to* */ - ViceFid destFid; /* Directory in which to place link */ - char *tname; /* Place holder for data. */ - } cfs_link; - - - - oouutt - empty - - DDeessccrriippttiioonn This call creates a link to the sourceFid in the directory - identified by destFid with name tname. The source must reside in the - target's parent, i.e. the source must be have parent destFid, i.e. Coda - does not support cross directory hard links. Only the return value is - relevant. It indicates success or the type of failure. - - EErrrroorrss The usual errors can occur.0wpage - - 44..1111.. ssyymmlliinnkk - - - SSuummmmaarryy create a symbolic link - - AArrgguummeennttss - - iinn - - struct cfs_symlink_in { - ViceFid VFid; /* Directory to put symlink in */ - char *srcname; - struct coda_vattr attr; - char *tname; - } cfs_symlink; - - - - oouutt - none - - DDeessccrriippttiioonn Create a symbolic link. The link is to be placed in the - directory identified by VFid and named tname. It should point to the - pathname srcname. The attributes of the newly created object are to - be set to attr. - - EErrrroorrss - - NNOOTTEE The attributes of the target directory should be returned since - its size changed. - - 0wpage - - 44..1122.. rreemmoovvee - - - SSuummmmaarryy Remove a file - - AArrgguummeennttss - - iinn - - struct cfs_remove_in { - ViceFid VFid; - char *name; /* Place holder for data. */ - } cfs_remove; - - - - oouutt - none - - DDeessccrriippttiioonn Remove file named cfs_remove_in.name in directory - identified by VFid. - - EErrrroorrss - - NNOOTTEE The attributes of the directory should be returned since its - mtime and size may change. - - 0wpage - - 44..1133.. rrmmddiirr - - - SSuummmmaarryy Remove a directory - - AArrgguummeennttss - - iinn - - struct cfs_rmdir_in { - ViceFid VFid; - char *name; /* Place holder for data. */ - } cfs_rmdir; - - - - oouutt - none - - DDeessccrriippttiioonn Remove the directory with name name from the directory - identified by VFid. - - EErrrroorrss - - NNOOTTEE The attributes of the parent directory should be returned since - its mtime and size may change. - - 0wpage - - 44..1144.. rreeaaddlliinnkk - - - SSuummmmaarryy Read the value of a symbolic link. - - AArrgguummeennttss - - iinn - - struct cfs_readlink_in { - ViceFid VFid; - } cfs_readlink; - - - - oouutt - - struct cfs_readlink_out { - int count; - caddr_t data; /* Place holder for data. */ - } cfs_readlink; - - - - DDeessccrriippttiioonn This routine reads the contents of symbolic link - identified by VFid into the buffer data. The buffer data must be able - to hold any name up to CFS_MAXNAMLEN (PATH or NAM??). - - EErrrroorrss No unusual errors. - - 0wpage - - 44..1155.. ooppeenn - - - SSuummmmaarryy Open a file. - - AArrgguummeennttss - - iinn - - struct cfs_open_in { - ViceFid VFid; - int flags; - } cfs_open; - - - - oouutt - - struct cfs_open_out { - dev_t dev; - ino_t inode; - } cfs_open; - - - - DDeessccrriippttiioonn This request asks Venus to place the file identified by - VFid in its cache and to note that the calling process wishes to open - it with flags as in open(2). The return value to the kernel differs - for Unix and Windows systems. For Unix systems the Coda FS Driver is - informed of the device and inode number of the container file in the - fields dev and inode. For Windows the path of the container file is - returned to the kernel. - EErrrroorrss - - NNOOTTEE Currently the cfs_open_out structure is not properly adapted to - deal with the Windows case. It might be best to implement two - upcalls, one to open aiming at a container file name, the other at a - container file inode. - - 0wpage - - 44..1166.. cclloossee - - - SSuummmmaarryy Close a file, update it on the servers. - - AArrgguummeennttss - - iinn - - struct cfs_close_in { - ViceFid VFid; - int flags; - } cfs_close; - - - - oouutt - none - - DDeessccrriippttiioonn Close the file identified by VFid. - - EErrrroorrss - - NNOOTTEE The flags argument is bogus and not used. However, Venus' code - has room to deal with an execp input field, probably this field should - be used to inform Venus that the file was closed but is still memory - mapped for execution. There are comments about fetching versus not - fetching the data in Venus vproc_vfscalls. This seems silly. If a - file is being closed, the data in the container file is to be the new - data. Here again the execp flag might be in play to create confusion: - currently Venus might think a file can be flushed from the cache when - it is still memory mapped. This needs to be understood. - - 0wpage - - 44..1177.. iiooccttll - - - SSuummmmaarryy Do an ioctl on a file. This includes the pioctl interface. - - AArrgguummeennttss - - iinn - - struct cfs_ioctl_in { - ViceFid VFid; - int cmd; - int len; - int rwflag; - char *data; /* Place holder for data. */ - } cfs_ioctl; - - - - oouutt - - - struct cfs_ioctl_out { - int len; - caddr_t data; /* Place holder for data. */ - } cfs_ioctl; - - - - DDeessccrriippttiioonn Do an ioctl operation on a file. The command, len and - data arguments are filled as usual. flags is not used by Venus. - - EErrrroorrss - - NNOOTTEE Another bogus parameter. flags is not used. What is the - business about PREFETCHING in the Venus code? - - - 0wpage - - 44..1188.. rreennaammee - - - SSuummmmaarryy Rename a fid. - - AArrgguummeennttss - - iinn - - struct cfs_rename_in { - ViceFid sourceFid; - char *srcname; - ViceFid destFid; - char *destname; - } cfs_rename; - - - - oouutt - none - - DDeessccrriippttiioonn Rename the object with name srcname in directory - sourceFid to destname in destFid. It is important that the names - srcname and destname are 0 terminated strings. Strings in Unix - kernels are not always null terminated. - - EErrrroorrss - - 0wpage - - 44..1199.. rreeaaddddiirr - - - SSuummmmaarryy Read directory entries. - - AArrgguummeennttss - - iinn - - struct cfs_readdir_in { - ViceFid VFid; - int count; - int offset; - } cfs_readdir; - - - - - oouutt - - struct cfs_readdir_out { - int size; - caddr_t data; /* Place holder for data. */ - } cfs_readdir; - - - - DDeessccrriippttiioonn Read directory entries from VFid starting at offset and - read at most count bytes. Returns the data in data and returns - the size in size. - - EErrrroorrss - - NNOOTTEE This call is not used. Readdir operations exploit container - files. We will re-evaluate this during the directory revamp which is - about to take place. - - 0wpage - - 44..2200.. vvggeett - - - SSuummmmaarryy instructs Venus to do an FSDB->Get. - - AArrgguummeennttss - - iinn - - struct cfs_vget_in { - ViceFid VFid; - } cfs_vget; - - - - oouutt - - struct cfs_vget_out { - ViceFid VFid; - int vtype; - } cfs_vget; - - - - DDeessccrriippttiioonn This upcall asks Venus to do a get operation on an fsobj - labelled by VFid. - - EErrrroorrss - - NNOOTTEE This operation is not used. However, it is extremely useful - since it can be used to deal with read/write memory mapped files. - These can be "pinned" in the Venus cache using vget and released with - inactive. - - 0wpage - - 44..2211.. ffssyynncc - - - SSuummmmaarryy Tell Venus to update the RVM attributes of a file. - - AArrgguummeennttss - - iinn - - struct cfs_fsync_in { - ViceFid VFid; - } cfs_fsync; - - - - oouutt - none - - DDeessccrriippttiioonn Ask Venus to update RVM attributes of object VFid. This - should be called as part of kernel level fsync type calls. The - result indicates if the syncing was successful. - - EErrrroorrss - - NNOOTTEE Linux does not implement this call. It should. - - 0wpage - - 44..2222.. iinnaaccttiivvee - - - SSuummmmaarryy Tell Venus a vnode is no longer in use. - - AArrgguummeennttss - - iinn - - struct cfs_inactive_in { - ViceFid VFid; - } cfs_inactive; - - - - oouutt - none - - DDeessccrriippttiioonn This operation returns EOPNOTSUPP. - - EErrrroorrss - - NNOOTTEE This should perhaps be removed. - - 0wpage - - 44..2233.. rrddwwrr - - - SSuummmmaarryy Read or write from a file - - AArrgguummeennttss - - iinn - - struct cfs_rdwr_in { - ViceFid VFid; - int rwflag; - int count; - int offset; - int ioflag; - caddr_t data; /* Place holder for data. */ - } cfs_rdwr; - - - - - oouutt - - struct cfs_rdwr_out { - int rwflag; - int count; - caddr_t data; /* Place holder for data. */ - } cfs_rdwr; - - - - DDeessccrriippttiioonn This upcall asks Venus to read or write from a file. - - EErrrroorrss - - NNOOTTEE It should be removed since it is against the Coda philosophy that - read/write operations never reach Venus. I have been told the - operation does not work. It is not currently used. - - - 0wpage - - 44..2244.. ooddyymmoouunntt - - - SSuummmmaarryy Allows mounting multiple Coda "filesystems" on one Unix mount - point. - - AArrgguummeennttss - - iinn - - struct ody_mount_in { - char *name; /* Place holder for data. */ - } ody_mount; - - - - oouutt - - struct ody_mount_out { - ViceFid VFid; - } ody_mount; - - - - DDeessccrriippttiioonn Asks Venus to return the rootfid of a Coda system named - name. The fid is returned in VFid. - - EErrrroorrss - - NNOOTTEE This call was used by David for dynamic sets. It should be - removed since it causes a jungle of pointers in the VFS mounting area. - It is not used by Coda proper. Call is not implemented by Venus. - - 0wpage - - 44..2255.. ooddyy__llooookkuupp - - - SSuummmmaarryy Looks up something. - - AArrgguummeennttss - - iinn irrelevant - - - oouutt - irrelevant - - DDeessccrriippttiioonn - - EErrrroorrss - - NNOOTTEE Gut it. Call is not implemented by Venus. - - 0wpage - - 44..2266.. ooddyy__eexxppaanndd - - - SSuummmmaarryy expands something in a dynamic set. - - AArrgguummeennttss - - iinn irrelevant - - oouutt - irrelevant - - DDeessccrriippttiioonn - - EErrrroorrss - - NNOOTTEE Gut it. Call is not implemented by Venus. - - 0wpage - - 44..2277.. pprreeffeettcchh - - - SSuummmmaarryy Prefetch a dynamic set. - - AArrgguummeennttss - - iinn Not documented. - - oouutt - Not documented. - - DDeessccrriippttiioonn Venus worker.cc has support for this call, although it is - noted that it doesn't work. Not surprising, since the kernel does not - have support for it. (ODY_PREFETCH is not a defined operation). - - EErrrroorrss - - NNOOTTEE Gut it. It isn't working and isn't used by Coda. - - - 0wpage - - 44..2288.. ssiiggnnaall - - - SSuummmmaarryy Send Venus a signal about an upcall. - - AArrgguummeennttss - - iinn none - - oouutt - not applicable. - - DDeessccrriippttiioonn This is an out-of-band upcall to Venus to inform Venus - that the calling process received a signal after Venus read the - message from the input queue. Venus is supposed to clean up the - operation. - - EErrrroorrss No reply is given. - - NNOOTTEE We need to better understand what Venus needs to clean up and if - it is doing this correctly. Also we need to handle multiple upcall - per system call situations correctly. It would be important to know - what state changes in Venus take place after an upcall for which the - kernel is responsible for notifying Venus to clean up (e.g. open - definitely is such a state change, but many others are maybe not). - - 0wpage - - 55.. TThhee mmiinniiccaacchhee aanndd ddoowwnnccaallllss - - - The Coda FS Driver can cache results of lookup and access upcalls, to - limit the frequency of upcalls. Upcalls carry a price since a process - context switch needs to take place. The counterpart of caching the - information is that Venus will notify the FS Driver that cached - entries must be flushed or renamed. - - The kernel code generally has to maintain a structure which links the - internal file handles (called vnodes in BSD, inodes in Linux and - FileHandles in Windows) with the ViceFid's which Venus maintains. The - reason is that frequent translations back and forth are needed in - order to make upcalls and use the results of upcalls. Such linking - objects are called ccnnooddeess. - - The current minicache implementations have cache entries which record - the following: - - 1. the name of the file - - 2. the cnode of the directory containing the object - - 3. a list of CodaCred's for which the lookup is permitted. - - 4. the cnode of the object - - The lookup call in the Coda FS Driver may request the cnode of the - desired object from the cache, by passing its name, directory and the - CodaCred's of the caller. The cache will return the cnode or indicate - that it cannot be found. The Coda FS Driver must be careful to - invalidate cache entries when it modifies or removes objects. - - When Venus obtains information that indicates that cache entries are - no longer valid, it will make a downcall to the kernel. Downcalls are - intercepted by the Coda FS Driver and lead to cache invalidations of - the kind described below. The Coda FS Driver does not return an error - unless the downcall data could not be read into kernel memory. - - - 55..11.. IINNVVAALLIIDDAATTEE - - - No information is available on this call. - - - 55..22.. FFLLUUSSHH - - - - AArrgguummeennttss None - - SSuummmmaarryy Flush the name cache entirely. - - DDeessccrriippttiioonn Venus issues this call upon startup and when it dies. This - is to prevent stale cache information being held. Some operating - systems allow the kernel name cache to be switched off dynamically. - When this is done, this downcall is made. - - - 55..33.. PPUURRGGEEUUSSEERR - - - AArrgguummeennttss - - struct cfs_purgeuser_out {/* CFS_PURGEUSER is a venus->kernel call */ - struct CodaCred cred; - } cfs_purgeuser; - - - - DDeessccrriippttiioonn Remove all entries in the cache carrying the Cred. This - call is issued when tokens for a user expire or are flushed. - - - 55..44.. ZZAAPPFFIILLEE - - - AArrgguummeennttss - - struct cfs_zapfile_out { /* CFS_ZAPFILE is a venus->kernel call */ - ViceFid CodaFid; - } cfs_zapfile; - - - - DDeessccrriippttiioonn Remove all entries which have the (dir vnode, name) pair. - This is issued as a result of an invalidation of cached attributes of - a vnode. - - NNOOTTEE Call is not named correctly in NetBSD and Mach. The minicache - zapfile routine takes different arguments. Linux does not implement - the invalidation of attributes correctly. - - - - 55..55.. ZZAAPPDDIIRR - - - AArrgguummeennttss - - struct cfs_zapdir_out { /* CFS_ZAPDIR is a venus->kernel call */ - ViceFid CodaFid; - } cfs_zapdir; - - - - DDeessccrriippttiioonn Remove all entries in the cache lying in a directory - CodaFid, and all children of this directory. This call is issued when - Venus receives a callback on the directory. - - - 55..66.. ZZAAPPVVNNOODDEE - - - - AArrgguummeennttss - - struct cfs_zapvnode_out { /* CFS_ZAPVNODE is a venus->kernel call */ - struct CodaCred cred; - ViceFid VFid; - } cfs_zapvnode; - - - - DDeessccrriippttiioonn Remove all entries in the cache carrying the cred and VFid - as in the arguments. This downcall is probably never issued. - - - 55..77.. PPUURRGGEEFFIIDD - - - SSuummmmaarryy - - AArrgguummeennttss - - struct cfs_purgefid_out { /* CFS_PURGEFID is a venus->kernel call */ - ViceFid CodaFid; - } cfs_purgefid; - - - - DDeessccrriippttiioonn Flush the attribute for the file. If it is a dir (odd - vnode), purge its children from the namecache and remove the file from the - namecache. - - - - 55..88.. RREEPPLLAACCEE - - - SSuummmmaarryy Replace the Fid's for a collection of names. - - AArrgguummeennttss - - struct cfs_replace_out { /* cfs_replace is a venus->kernel call */ - ViceFid NewFid; - ViceFid OldFid; - } cfs_replace; - - - - DDeessccrriippttiioonn This routine replaces a ViceFid in the name cache with - another. It is added to allow Venus during reintegration to replace - locally allocated temp fids while disconnected with global fids even - when the reference counts on those fids are not zero. - - 0wpage - - 66.. IInniittiiaalliizzaattiioonn aanndd cclleeaannuupp - - - This section gives brief hints as to desirable features for the Coda - FS Driver at startup and upon shutdown or Venus failures. Before - entering the discussion it is useful to repeat that the Coda FS Driver - maintains the following data: - - - 1. message queues - - 2. cnodes - - 3. name cache entries - - The name cache entries are entirely private to the driver, so they - can easily be manipulated. The message queues will generally have - clear points of initialization and destruction. The cnodes are - much more delicate. User processes hold reference counts in Coda - filesystems and it can be difficult to clean up the cnodes. - - It can expect requests through: - - 1. the message subsystem - - 2. the VFS layer - - 3. pioctl interface - - Currently the _p_i_o_c_t_l passes through the VFS for Coda so we can - treat these similarly. - - - 66..11.. RReeqquuiirreemmeennttss - - - The following requirements should be accommodated: - - 1. The message queues should have open and close routines. On Unix - the opening of the character devices are such routines. - - +o Before opening, no messages can be placed. - - +o Opening will remove any old messages still pending. - - +o Close will notify any sleeping processes that their upcall cannot - be completed. - - +o Close will free all memory allocated by the message queues. - - - 2. At open the namecache shall be initialized to empty state. - - 3. Before the message queues are open, all VFS operations will fail. - Fortunately this can be achieved by making sure than mounting the - Coda filesystem cannot succeed before opening. - - 4. After closing of the queues, no VFS operations can succeed. Here - one needs to be careful, since a few operations (lookup, - read/write, readdir) can proceed without upcalls. These must be - explicitly blocked. - - 5. Upon closing the namecache shall be flushed and disabled. - - 6. All memory held by cnodes can be freed without relying on upcalls. - - 7. Unmounting the file system can be done without relying on upcalls. - - 8. Mounting the Coda filesystem should fail gracefully if Venus cannot - get the rootfid or the attributes of the rootfid. The latter is - best implemented by Venus fetching these objects before attempting - to mount. - - NNOOTTEE NetBSD in particular but also Linux have not implemented the - above requirements fully. For smooth operation this needs to be - corrected. - - - diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst index 71aba402aa2c..9a7021bcb91f 100644 --- a/Documentation/filesystems/index.rst +++ b/Documentation/filesystems/index.rst @@ -63,6 +63,7 @@ Documentation for filesystem implementations. btrfs cifs/cifsroot ceph + coda cramfs debugfs dlmfs diff --git a/MAINTAINERS b/MAINTAINERS index 7efea3593ff5..7d26487c55cf 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4214,7 +4214,7 @@ M: coda@cs.cmu.edu L: codalist@coda.cs.cmu.edu S: Maintained W: http://www.coda.cs.cmu.edu/ -F: Documentation/filesystems/coda.txt +F: Documentation/filesystems/coda.rst F: fs/coda/ F: include/linux/coda*.h F: include/uapi/linux/coda*.h diff --git a/fs/coda/Kconfig b/fs/coda/Kconfig index ae6759f9594a..c3477eeafb3f 100644 --- a/fs/coda/Kconfig +++ b/fs/coda/Kconfig @@ -15,7 +15,7 @@ config CODA_FS *client*. You will need user level code as well, both for the client and server. Servers are currently user level, i.e. they need no kernel support. Please read - and check out the Coda + and check out the Coda home page . To compile the coda client support as a module, choose M here: the -- 2.25.4