lkml.org 
[lkml]   [2020]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 2/4] iio: vcnl4000: Add event support for VCNL4010/20.
On Wed, 22 Apr 2020 15:08:54 +0200
Mathieu Othacehe <m.othacehe@gmail.com> wrote:

> The VCNL4010 and VCNL4020 chips are able to raise interrupts on proximity
> threshold events. Add support for threshold rising and falling events for
> those two chips.
>
> Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
One nitpick inline and an observation but looks fine in general.

Please move the scan index stuff to patch 4.

> ---
> drivers/iio/light/vcnl4000.c | 456 ++++++++++++++++++++++++++++++-----
> 1 file changed, 394 insertions(+), 62 deletions(-)
>
> diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
> index 695a81e95d8d..4041608910d0 100644
> --- a/drivers/iio/light/vcnl4000.c
> +++ b/drivers/iio/light/vcnl4000.c
> @@ -13,7 +13,6 @@
> *
> * TODO:
> * allow to adjust IR current
> - * proximity threshold and event handling
> * periodic ALS/proximity measurement (VCNL4010/20)
> * interrupts (VCNL4010/20/40, VCNL4200)
> */
> @@ -23,7 +22,9 @@
> #include <linux/err.h>
> #include <linux/delay.h>
> #include <linux/pm_runtime.h>
> +#include <linux/interrupt.h>
>
> +#include <linux/iio/events.h>
> #include <linux/iio/iio.h>
> #include <linux/iio/sysfs.h>
>
> @@ -35,14 +36,22 @@
>
> #define VCNL4000_COMMAND 0x80 /* Command register */
> #define VCNL4000_PROD_REV 0x81 /* Product ID and Revision ID */
> +#define VCNL4010_PROX_RATE 0x82 /* Proximity rate */
> #define VCNL4000_LED_CURRENT 0x83 /* IR LED current for proximity mode */
> #define VCNL4000_AL_PARAM 0x84 /* Ambient light parameter register */
> +#define VCNL4010_ALS_PARAM 0x84 /* ALS rate */
> #define VCNL4000_AL_RESULT_HI 0x85 /* Ambient light result register, MSB */
> #define VCNL4000_AL_RESULT_LO 0x86 /* Ambient light result register, LSB */
> #define VCNL4000_PS_RESULT_HI 0x87 /* Proximity result register, MSB */
> #define VCNL4000_PS_RESULT_LO 0x88 /* Proximity result register, LSB */
> #define VCNL4000_PS_MEAS_FREQ 0x89 /* Proximity test signal frequency */
> +#define VCNL4010_INT_CTRL 0x89 /* Interrupt control */
> #define VCNL4000_PS_MOD_ADJ 0x8a /* Proximity modulator timing adjustment */
> +#define VCNL4010_LOW_THR_HI 0x8a /* Low threshold, MSB */
> +#define VCNL4010_LOW_THR_LO 0x8b /* Low threshold, LSB */
> +#define VCNL4010_HIGH_THR_HI 0x8c /* High threshold, MSB */
> +#define VCNL4010_HIGH_THR_LO 0x8d /* High threshold, LSB */
> +#define VCNL4010_ISR 0x8e /* Interrupt status */
>
> #define VCNL4200_AL_CONF 0x00 /* Ambient light configuration */
> #define VCNL4200_PS_CONF1 0x03 /* Proximity configuration */
> @@ -57,6 +66,26 @@
> #define VCNL4000_PS_RDY BIT(5) /* proximity data ready? */
> #define VCNL4000_AL_OD BIT(4) /* start on-demand ALS measurement */
> #define VCNL4000_PS_OD BIT(3) /* start on-demand proximity measurement */
> +#define VCNL4000_ALS_EN BIT(2) /* start ALS measurement */
> +#define VCNL4000_PROX_EN BIT(1) /* start proximity measurement */
> +#define VCNL4000_SELF_TIMED_EN BIT(0) /* start self-timed measurement */
> +
> +/* Bit masks for interrupt registers. */
> +#define VCNL4010_INT_THR_SEL BIT(0) /* Select threshold interrupt source */
> +#define VCNL4010_INT_THR_EN BIT(1) /* Threshold interrupt type */
> +#define VCNL4010_INT_ALS_EN BIT(2) /* Enable on ALS data ready */
> +#define VCNL4010_INT_PROX_EN BIT(3) /* Enable on proximity data ready */
> +
> +#define VCNL4010_INT_THR_HIGH 0 /* High threshold exceeded */
> +#define VCNL4010_INT_THR_LOW 1 /* Low threshold exceeded */
> +#define VCNL4010_INT_ALS 2 /* ALS data ready */
> +#define VCNL4010_INT_PROXIMITY 3 /* Proximity data ready */
> +
> +#define VCNL4010_INT_THR \
> + (BIT(VCNL4010_INT_THR_LOW) | BIT(VCNL4010_INT_THR_HIGH))
> +#define VCNL4010_INT_DRDY \
> + (BIT(VCNL4010_INT_PROXIMITY) | BIT(VCNL4010_INT_ALS))
> +
>
> #define VCNL4000_SLEEP_DELAY_MS 2000 /* before we enter pm_runtime_suspend */
>
> @@ -88,6 +117,10 @@ struct vcnl4000_data {
>
> struct vcnl4000_chip_spec {
> const char *prod;
> + struct iio_chan_spec const *channels;
> + const int num_channels;
> + const struct iio_info *info;
> + bool irq_support;
> int (*init)(struct vcnl4000_data *data);
> int (*measure_light)(struct vcnl4000_data *data, int *val);
> int (*measure_proximity)(struct vcnl4000_data *data, int *val);
> @@ -333,67 +366,16 @@ static int vcnl4200_measure_proximity(struct vcnl4000_data *data, int *val)
> return vcnl4200_measure(data, &data->vcnl4200_ps, val);
> }
>
> -static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
> - [VCNL4000] = {
> - .prod = "VCNL4000",
> - .init = vcnl4000_init,
> - .measure_light = vcnl4000_measure_light,
> - .measure_proximity = vcnl4000_measure_proximity,
> - .set_power_state = vcnl4000_set_power_state,
> - },
> - [VCNL4010] = {
> - .prod = "VCNL4010/4020",
> - .init = vcnl4000_init,
> - .measure_light = vcnl4000_measure_light,
> - .measure_proximity = vcnl4000_measure_proximity,
> - .set_power_state = vcnl4000_set_power_state,
> - },
> - [VCNL4040] = {
> - .prod = "VCNL4040",
> - .init = vcnl4200_init,
> - .measure_light = vcnl4200_measure_light,
> - .measure_proximity = vcnl4200_measure_proximity,
> - .set_power_state = vcnl4200_set_power_state,
> - },
> - [VCNL4200] = {
> - .prod = "VCNL4200",
> - .init = vcnl4200_init,
> - .measure_light = vcnl4200_measure_light,
> - .measure_proximity = vcnl4200_measure_proximity,
> - .set_power_state = vcnl4200_set_power_state,
> - },
> -};
> -
> -static ssize_t vcnl4000_read_near_level(struct iio_dev *indio_dev,
> - uintptr_t priv,
> - const struct iio_chan_spec *chan,
> - char *buf)
> +static bool vcnl4010_is_in_periodic_mode(struct vcnl4000_data *data)
> {
> - struct vcnl4000_data *data = iio_priv(indio_dev);
> -
> - return sprintf(buf, "%u\n", data->near_level);
> -}
> + int ret;
>
> -static const struct iio_chan_spec_ext_info vcnl4000_ext_info[] = {
> - {
> - .name = "nearlevel",
> - .shared = IIO_SEPARATE,
> - .read = vcnl4000_read_near_level,
> - },
> - { /* sentinel */ }
> -};
> + ret = i2c_smbus_read_byte_data(data->client, VCNL4000_COMMAND);
> + if (ret < 0)
> + return false;
>
> -static const struct iio_chan_spec vcnl4000_channels[] = {
> - {
> - .type = IIO_LIGHT,
> - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> - BIT(IIO_CHAN_INFO_SCALE),
> - }, {
> - .type = IIO_PROXIMITY,
> - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> - .ext_info = vcnl4000_ext_info,
> - }
> -};
> + return !!(ret & VCNL4000_SELF_TIMED_EN);
> +}
>
> static int vcnl4000_set_pm_runtime_state(struct vcnl4000_data *data, bool on)
> {
> @@ -453,10 +435,347 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,
> }
> }
>
> +static int vcnl4010_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + int ret;
> + struct vcnl4000_data *data = iio_priv(indio_dev);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + case IIO_CHAN_INFO_SCALE:
> + ret = iio_device_claim_direct_mode(indio_dev);
> + if (ret)
> + return ret;
> +
> + /* Protect against event capture. */
> + if (vcnl4010_is_in_periodic_mode(data)) {
> + ret = -EBUSY;
> + } else {
> + ret = vcnl4000_read_raw(indio_dev, chan, val, val2,
> + mask);
> + }
> +
> + iio_device_release_direct_mode(indio_dev);
> + return ret;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int vcnl4010_read_event(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan,
> + enum iio_event_type type,
> + enum iio_event_direction dir,
> + enum iio_event_info info,
> + int *val, int *val2)
> +{
> + int ret;
> + struct vcnl4000_data *data = iio_priv(indio_dev);
> +
> + switch (info) {
> + case IIO_EV_INFO_VALUE:
> + switch (dir) {
> + case IIO_EV_DIR_RISING:
> + ret = vcnl4000_read_data(data, VCNL4010_HIGH_THR_HI,
> + val);
> + if (ret < 0)
> + return ret;
> + return IIO_VAL_INT;
> + case IIO_EV_DIR_FALLING:
> + ret = vcnl4000_read_data(data, VCNL4010_LOW_THR_HI,
> + val);
> + if (ret < 0)
> + return ret;
> + return IIO_VAL_INT;
> + default:
> + return -EINVAL;
> + }
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int vcnl4010_write_event(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan,
> + enum iio_event_type type,
> + enum iio_event_direction dir,
> + enum iio_event_info info,
> + int val, int val2)
> +{
> + int ret;
> + struct vcnl4000_data *data = iio_priv(indio_dev);
> +
> + switch (info) {
> + case IIO_EV_INFO_VALUE:
> + switch (dir) {
> + case IIO_EV_DIR_RISING:
> + ret = vcnl4000_write_data(data, VCNL4010_HIGH_THR_HI,
> + val);
> + if (ret < 0)
> + return ret;
> + return IIO_VAL_INT;
> + case IIO_EV_DIR_FALLING:
> + ret = vcnl4000_write_data(data, VCNL4010_LOW_THR_HI,
> + val);
> + if (ret < 0)
> + return ret;
> + return IIO_VAL_INT;
> + default:
> + return -EINVAL;
> + }
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static bool vcnl4010_is_thr_enabled(struct vcnl4000_data *data)
> +{
> + int ret;
> +
> + ret = i2c_smbus_read_byte_data(data->client, VCNL4010_INT_CTRL);
> + if (ret < 0)
> + return false;
> +
> + return !!(ret & VCNL4010_INT_THR_EN);
> +}
> +
> +static int vcnl4010_read_event_config(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan,
> + enum iio_event_type type,
> + enum iio_event_direction dir)
> +{
> + struct vcnl4000_data *data = iio_priv(indio_dev);
> +
> + switch (chan->type) {
> + case IIO_PROXIMITY:
> + return vcnl4010_is_thr_enabled(data);
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int vcnl4010_config_threshold(struct iio_dev *indio_dev, bool state)
> +{
> + struct vcnl4000_data *data = iio_priv(indio_dev);
> + int ret;
> + int icr;
> + int command;
> +
> + if (state) {
> + ret = iio_device_claim_direct_mode(indio_dev);

Personally I'd probably have taken the simpler approach of taking the
lock in both paths, but this works I think, so fair enough.

> + if (ret)
> + return ret;
> +
> + /* Enable periodic measurement of proximity data. */
> + command = VCNL4000_SELF_TIMED_EN | VCNL4000_PROX_EN;
> +
> + /*
> + * Enable interrupts on threshold, for proximity data by
> + * default.
> + */
> + icr = VCNL4010_INT_THR_EN;
> + } else {
> + if (!vcnl4010_is_thr_enabled(data))
> + return 0;
> +
> + command = 0;
> + icr = 0;
> + }
> +
> + ret = i2c_smbus_write_byte_data(data->client, VCNL4000_COMMAND,
> + command);
> + if (ret < 0)
> + goto end;
> +
> + ret = i2c_smbus_write_byte_data(data->client, VCNL4010_INT_CTRL, icr);
> +
> +end:
> + if (state)
> + iio_device_release_direct_mode(indio_dev);
> +
> + return ret;
> +}
> +
> +static int vcnl4010_write_event_config(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan,
> + enum iio_event_type type,
> + enum iio_event_direction dir,
> + int state)
> +{
> + switch (chan->type) {
> + case IIO_PROXIMITY:
> + return vcnl4010_config_threshold(indio_dev, state);
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static ssize_t vcnl4000_read_near_level(struct iio_dev *indio_dev,
> + uintptr_t priv,
> + const struct iio_chan_spec *chan,
> + char *buf)
> +{
> + struct vcnl4000_data *data = iio_priv(indio_dev);
> +
> + return sprintf(buf, "%u\n", data->near_level);
> +}
> +
> +static const struct iio_chan_spec_ext_info vcnl4000_ext_info[] = {
> + {
> + .name = "nearlevel",
> + .shared = IIO_SEPARATE,
> + .read = vcnl4000_read_near_level,
> + },
> + { /* sentinel */ }
> +};
> +
> +static const struct iio_event_spec vcnl4000_event_spec[] = {
> + {
> + .type = IIO_EV_TYPE_THRESH,
> + .dir = IIO_EV_DIR_RISING,
> + .mask_separate = BIT(IIO_EV_INFO_VALUE),
> + }, {
> + .type = IIO_EV_TYPE_THRESH,
> + .dir = IIO_EV_DIR_FALLING,
> + .mask_separate = BIT(IIO_EV_INFO_VALUE),
> + }, {
> + .type = IIO_EV_TYPE_THRESH,
> + .dir = IIO_EV_DIR_EITHER,
> + .mask_separate = BIT(IIO_EV_INFO_ENABLE),
> + }
> +};
> +
> +static const struct iio_chan_spec vcnl4000_channels[] = {
> + {
> + .type = IIO_LIGHT,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> + BIT(IIO_CHAN_INFO_SCALE),
> + }, {
> + .type = IIO_PROXIMITY,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + .ext_info = vcnl4000_ext_info,
> + }
> +};
> +
> +static const struct iio_chan_spec vcnl4010_channels[] = {
> + {
> + .type = IIO_LIGHT,
> + .scan_index = -1,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> + BIT(IIO_CHAN_INFO_SCALE),
> + }, {
> + .type = IIO_PROXIMITY,
> + .scan_index = 0,

I managed to review v4 failing to notice you'd sent v5.
scan_index should only be introduced in the patch adding buffered
support.

> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + .event_spec = vcnl4000_event_spec,
> + .num_event_specs = ARRAY_SIZE(vcnl4000_event_spec),
> + .ext_info = vcnl4000_ext_info,
> + },
> +};
> +
> static const struct iio_info vcnl4000_info = {
> .read_raw = vcnl4000_read_raw,
> };
>
> +static const struct iio_info vcnl4010_info = {
> + .read_raw = vcnl4010_read_raw,
> + .read_event_value = vcnl4010_read_event,
> + .write_event_value = vcnl4010_write_event,
> + .read_event_config = vcnl4010_read_event_config,
> + .write_event_config = vcnl4010_write_event_config,
> +};
> +
> +static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
> + [VCNL4000] = {
> + .prod = "VCNL4000",
> + .init = vcnl4000_init,
> + .measure_light = vcnl4000_measure_light,
> + .measure_proximity = vcnl4000_measure_proximity,
> + .set_power_state = vcnl4000_set_power_state,
> + .channels = vcnl4000_channels,
> + .num_channels = ARRAY_SIZE(vcnl4000_channels),
> + .info = &vcnl4000_info,
> + .irq_support = false,
> + },
> + [VCNL4010] = {
> + .prod = "VCNL4010/4020",
> + .init = vcnl4000_init,
> + .measure_light = vcnl4000_measure_light,
> + .measure_proximity = vcnl4000_measure_proximity,
> + .set_power_state = vcnl4000_set_power_state,
> + .channels = vcnl4010_channels,
> + .num_channels = ARRAY_SIZE(vcnl4010_channels),
> + .info = &vcnl4010_info,
> + .irq_support = true,
> + },
> + [VCNL4040] = {
> + .prod = "VCNL4040",
> + .init = vcnl4200_init,
> + .measure_light = vcnl4200_measure_light,
> + .measure_proximity = vcnl4200_measure_proximity,
> + .set_power_state = vcnl4200_set_power_state,
> + .channels = vcnl4000_channels,
> + .num_channels = ARRAY_SIZE(vcnl4000_channels),
> + .info = &vcnl4000_info,
> + .irq_support = false,
> + },
> + [VCNL4200] = {
> + .prod = "VCNL4200",
> + .init = vcnl4200_init,
> + .measure_light = vcnl4200_measure_light,
> + .measure_proximity = vcnl4200_measure_proximity,
> + .set_power_state = vcnl4200_set_power_state,
> + .channels = vcnl4000_channels,
> + .num_channels = ARRAY_SIZE(vcnl4000_channels),
> + .info = &vcnl4000_info,
> + .irq_support = false,
> + },
> +};
> +
> +static irqreturn_t vcnl4010_irq_thread(int irq, void *p)
> +{
> + struct iio_dev *indio_dev = p;
> + struct vcnl4000_data *data = iio_priv(indio_dev);
> + unsigned long isr;
> + int ret;
> +
> + ret = i2c_smbus_read_byte_data(data->client, VCNL4010_ISR);
> + if (ret < 0)
> + goto end;
> +
> + isr = ret;
> +
> + if (isr & VCNL4010_INT_THR) {
> + if (test_bit(VCNL4010_INT_THR_LOW, &isr)) {
> + iio_push_event(indio_dev,
> + IIO_UNMOD_EVENT_CODE(
> + IIO_PROXIMITY,
> + 1,
> + IIO_EV_TYPE_THRESH,
> + IIO_EV_DIR_FALLING),
> + iio_get_time_ns(indio_dev));
> + }
> +
> + if (test_bit(VCNL4010_INT_THR_HIGH, &isr)) {
> + iio_push_event(indio_dev,
> + IIO_UNMOD_EVENT_CODE(
> + IIO_PROXIMITY,
> + 1,
> + IIO_EV_TYPE_THRESH,
> + IIO_EV_DIR_RISING),
> + iio_get_time_ns(indio_dev));
> + }
> +
> + i2c_smbus_write_byte_data(data->client, VCNL4010_ISR,
> + isr & VCNL4010_INT_THR);
> + }
> +
> +end:
> + return IRQ_HANDLED;
> +}
> +
> static int vcnl4000_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -486,12 +805,25 @@ static int vcnl4000_probe(struct i2c_client *client,
> data->near_level = 0;
>
> indio_dev->dev.parent = &client->dev;
> - indio_dev->info = &vcnl4000_info;
> - indio_dev->channels = vcnl4000_channels;
> - indio_dev->num_channels = ARRAY_SIZE(vcnl4000_channels);
> + indio_dev->info = data->chip_spec->info;
> + indio_dev->channels = data->chip_spec->channels;
> + indio_dev->num_channels = data->chip_spec->num_channels;
> indio_dev->name = VCNL4000_DRV_NAME;
> indio_dev->modes = INDIO_DIRECT_MODE;
>
> + if (client->irq && data->chip_spec->irq_support) {
> + ret = devm_request_threaded_irq(&client->dev, client->irq,
> + NULL, vcnl4010_irq_thread,
> + IRQF_TRIGGER_FALLING |
> + IRQF_ONESHOT,
> + "vcnl4010_irq",
> + indio_dev);
> + if (ret < 0) {
> + dev_err(&client->dev, "irq request failed\n");
> + return ret;
> + }
> + }
> +
> ret = pm_runtime_set_active(&client->dev);
> if (ret < 0)
> goto fail_poweroff;

\
 
 \ /
  Last update: 2020-04-26 11:18    [W:0.069 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site