lkml.org 
[lkml]   [2020]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 5/5] scsi: ufs: UFS Host Performance Booster(HPB) driver
From
Date
On 2020-04-16 13:31, huobean@gmail.com wrote:
> +static int ufshpb_execute_cmd(struct ufshpb_lu *hpb, unsigned char *cmd)
> +{
> + struct scsi_sense_hdr sshdr;
> + struct scsi_device *sdp;
> + struct ufs_hba *hba;
> + int retries;
> + int ret = 0;
> +
> + hba = hpb->hba;
> +
> + sdp = hba->sdev_ufs_lu[hpb->lun];
> + if (!sdp) {
> + hpb_warn("%s UFSHPB cannot find scsi_device\n", __func__);
> + return -ENODEV;
> + }
> +
> + ret = scsi_device_get(sdp);
> + if (!ret && !scsi_device_online(sdp)) {
> + ret = -ENODEV;
> + scsi_device_put(sdp);
> + return ret;
> + }
> +
> + for (retries = 3; retries > 0; --retries) {
> + ret = scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL, &sshdr,
> + msecs_to_jiffies(30000), 3, 0, RQF_PM, NULL);
> + if (ret == 0)
> + break;
> + }
> +
> + if (ret) {
> + if (driver_byte(ret) == DRIVER_SENSE &&
> + scsi_sense_valid(&sshdr)) {
> + switch (sshdr.sense_key) {
> + case ILLEGAL_REQUEST:
> + hpb_err("ILLEGAL REQUEST asc=0x%x ascq=0x%x\n",
> + sshdr.asc, sshdr.ascq);
> + break;
> + default:
> + hpb_err("Unknown return code = %x\n", ret);
> + break;
> + }
> + }
> + }
> + scsi_device_put(sdp);
> +
> + return ret;
> +}

If scsi_execute() would be changed into asynchronous SCSI command
submission, can ufshpb_execute_cmd() be called from inside the UFS
.queue_rq() callback instead of from workqueue context?

The scsi_device_get() call looks misplaced. I think that call should
happen before schedule_work() is called.

> +static int ufshpb_l2p_load_req(struct ufshpb_lu *hpb, struct request_queue *q,
> + struct ufshpb_map_req *map_req)
> +{
> + struct scsi_request *scsi_rq;
> + unsigned char cmd[16] = { };
> + struct request *req;
> + struct bio *bio;
> + int alloc_len;
> + int ret;
> +
> + bio = &map_req->bio;
> +
> + ret = ufshpb_add_bio_page(hpb, q, bio, map_req->bvec, map_req->mctx);
> + if (ret) {
> + hpb_err("ufshpb_add_bio_page() failed with ret %d\n", ret);
> + return ret;
> + }
> +
> + alloc_len = hpb->hba->hpb_geo.subregion_entry_sz;
> + /*
> + * HPB Sub-Regions are equally sized except for the last one which is
> + * smaller if the last hpb Region is not an integer multiple of
> + * bHPBSubRegionSize.
> + */
> + if (map_req->region == (hpb->lu_region_cnt - 1) &&
> + map_req->subregion == (hpb->subregions_in_last_region - 1))
> + alloc_len = hpb->last_subregion_entry_size;
> +
> + ufshpb_prepare_read_buf_cmd(cmd, map_req->region, map_req->subregion,
> + alloc_len);
> + if (!map_req->req) {
> + map_req->req = blk_get_request(q, REQ_OP_SCSI_IN, 0);
> + if (IS_ERR(map_req->req))
> + return PTR_ERR(map_req->req);
> + }
> + req = map_req->req;
> + scsi_rq = scsi_req(req);
> +
> + blk_rq_append_bio(req, &bio);
> +
> + scsi_req_init(scsi_rq);
> +
> + scsi_rq->cmd_len = COMMAND_SIZE(cmd[0]);
> + memcpy(scsi_rq->cmd, cmd, scsi_rq->cmd_len);
> + req->timeout = msecs_to_jiffies(30000);
> + req->end_io_data = (void *)map_req;
> +
> + hpb_dbg(SCHEDULE_INFO, hpb, "ISSUE READ_BUFFER : (%d-%d) retry = %d\n",
> + map_req->region, map_req->subregion, map_req->retry_cnt);
> + hpb_trace(hpb, "%s: I RB %d - %d", DRIVER_NAME, map_req->region,
> + map_req->subregion);
> +
> + blk_execute_rq_nowait(q, NULL, req, 1, ufshpb_l2p_load_req_done);
> + map_req->req_issue_t = ktime_to_ns(ktime_get());
> +
> + atomic64_inc(&hpb->status.map_req_cnt);
> +
> + return 0;
> +}

Same question here: if 'req' would be submitted asynchronously, can
ufshpb_l2p_load_req() be called directly from inside the UFS .queue_rq()
callback instead of from workqueue context?

Thanks,

Bart.

\
 
 \ /
  Last update: 2020-04-25 20:08    [W:0.216 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site