lkml.org 
[lkml]   [2020]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv2] i2c: slave-eeprom: Make it possible to pre-load eeprom data
On Fri, Apr 24, 2020 at 11:04:43AM +0200, Björn Ardö wrote:
> If the slave eeprom has a "firmware-name" in devicetree, then
> pre-load the data in the eeprom with this file. Otherwise we
> init the eeprom with 0xFF.
>
> Signed-off-by: Björn Ardö <bjorn.ardo@axis.com>

I like it a lot, thanks! Maybe we could add a SoB from Patrick for his
0xff-suggestion (but keeping you as the patch author).

Is this okay for everyone?

> ---
> drivers/i2c/i2c-slave-eeprom.c | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/drivers/i2c/i2c-slave-eeprom.c b/drivers/i2c/i2c-slave-eeprom.c
> index cb415b10642f..c846c96c25c9 100644
> --- a/drivers/i2c/i2c-slave-eeprom.c
> +++ b/drivers/i2c/i2c-slave-eeprom.c
> @@ -18,6 +18,7 @@
> */
>
> #include <linux/bitfield.h>
> +#include <linux/firmware.h>
> #include <linux/i2c.h>
> #include <linux/init.h>
> #include <linux/module.h>
> @@ -120,6 +121,26 @@ static ssize_t i2c_slave_eeprom_bin_write(struct file *filp, struct kobject *kob
> return count;
> }
>
> +static int i2c_slave_init_eeprom_data(struct eeprom_data *eeprom, struct i2c_client *client,
> + unsigned int size)
> +{
> + const struct firmware *fw;
> + const char *eeprom_data;
> + int error = device_property_read_string(&client->dev, "firmware-name", &eeprom_data);
> +
> + if (!error) {
> + int ret = request_firmware_into_buf(&fw, eeprom_data, &client->dev,
> + eeprom->buffer, size);
> + if (ret)
> + return ret;
> + release_firmware(fw);
> + } else {
> + /* An empty eeprom typically has all bits set to 1 */
> + memset(eeprom->buffer, 0xFF, size);
> + }
> + return 0;
> +}
> +
> static int i2c_slave_eeprom_probe(struct i2c_client *client, const struct i2c_device_id *id)
> {
> struct eeprom_data *eeprom;
> @@ -138,6 +159,10 @@ static int i2c_slave_eeprom_probe(struct i2c_client *client, const struct i2c_de
> spin_lock_init(&eeprom->buffer_lock);
> i2c_set_clientdata(client, eeprom);
>
> + ret = i2c_slave_init_eeprom_data(eeprom, client, size);
> + if (ret)
> + return ret;
> +
> sysfs_bin_attr_init(&eeprom->bin);
> eeprom->bin.attr.name = "slave-eeprom";
> eeprom->bin.attr.mode = S_IRUSR | S_IWUSR;
> --
> 2.11.0
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-04-24 12:04    [W:0.064 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site