lkml.org 
[lkml]   [2020]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] dt-bindings: phy: qcom-qusb2: Fix defaults
On Thu, 23 Apr 2020 11:10:27 -0700, Douglas Anderson wrote:
> The defaults listed in the bindings don't match what the code is
> actually doing. Presumably existing users care more about keeping
> existing behavior the same, so change the bindings to match the code
> in Linux.
>
> The "qcom,preemphasis-level" default has been wrong for quite a long
> time (May 2018). The other two were recently added.
>
> As some evidence that these values are wrong, this is from the Linux
> driver:
> - qcom,preemphasis-level: sets "PORT_TUNE1", lower 2 bits. Driver
> programs PORT_TUNE1 to 0x30 by default and (0x30 & 0x3) = 0.
> - qcom,bias-ctrl-value: sets "PLL_BIAS_CONTROL_2", lower 6 bits.
> Driver programs PLL_BIAS_CONTROL_2 to 0x20 by default and (0x20 &
> 0x3f) = 0x20 = 32.
> - qcom,hsdisc-trim-value: sets "PORT_TUNE2", lower 2 bits. Driver
> programs PORT_TUNE2 to 0x29 by default and (0x29 & 0x3) = 1.
>
> Fixes: 1e6f134eb67a ("dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters")
> Fixes: a8b70ccf10e3 ("dt-bindings: phy-qcom-usb2: Add support to override tuning values")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
>
> Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>

Applied, thanks.

Rob

\
 
 \ /
  Last update: 2020-04-25 00:52    [W:1.866 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site