lkml.org 
[lkml]   [2020]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH v2 1/4] usb: dwc2: gadget: move gadget resume after the core is in L0 state
Date


On 4/23/2020 3:55 PM, Fabrice Gasnier wrote:
> When the remote wakeup interrupt is triggered, lx_state is resumed from L2
> to L0 state. But when the gadget resume is called, lx_state is still L2.
> This prevents the resume callback to queue any request. Any attempt
> to queue a request from resume callback will result in:
> - "submit request only in active state" debug message to be issued
> - dwc2_hsotg_ep_queue() returns -EAGAIN
>
> Call the gadget resume routine after the core is in L0 state.
>
> Fixes: f81f46e1f530 ("usb: dwc2: implement hibernation during bus suspend/resume")
>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>

> ---
> Changes in v2:
> - Minor update to follow Minas suggestions
> ---
> drivers/usb/dwc2/core_intr.c | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
> index 876ff31..55f1d14 100644
> --- a/drivers/usb/dwc2/core_intr.c
> +++ b/drivers/usb/dwc2/core_intr.c
> @@ -416,10 +416,13 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
> if (ret && (ret != -ENOTSUPP))
> dev_err(hsotg->dev, "exit power_down failed\n");
>
> + /* Change to L0 state */
> + hsotg->lx_state = DWC2_L0;
> call_gadget(hsotg, resume);
> + } else {
> + /* Change to L0 state */
> + hsotg->lx_state = DWC2_L0;
> }
> - /* Change to L0 state */
> - hsotg->lx_state = DWC2_L0;
> } else {
> if (hsotg->params.power_down)
> return;
>
\
 
 \ /
  Last update: 2020-04-23 15:07    [W:0.042 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site