lkml.org 
[lkml]   [2020]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.6 146/166] drm/nouveau/gr/gp107,gp108: implement workaround for HW hanging during init
Date
From: Ben Skeggs <bskeggs@redhat.com>

[ Upstream commit 028a12f5aa829b4ba6ac011530b815eda4960e89 ]

Certain boards with GP107/GP108 chipsets hang (often, but randomly) for
unknown reasons during GR initialisation.

The first tell-tale symptom of this issue is:

nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 409800 [ TIMEOUT ]

appearing in dmesg, likely followed by many other failures being logged.

Karol found this WAR for the issue a while back, but efforts to isolate
the root cause and proper fix have not yielded success so far. I've
modified the original patch to include a few more details, limit it to
GP107/GP108 by default, and added a config option to override this choice.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../gpu/drm/nouveau/nvkm/engine/gr/gf100.c | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)

diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c b/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c
index dd8f85b8b3a7e..f2f5636efac45 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c
@@ -1981,8 +1981,34 @@ gf100_gr_init_(struct nvkm_gr *base)
{
struct gf100_gr *gr = gf100_gr(base);
struct nvkm_subdev *subdev = &base->engine.subdev;
+ struct nvkm_device *device = subdev->device;
+ bool reset = device->chipset == 0x137 || device->chipset == 0x138;
u32 ret;

+ /* On certain GP107/GP108 boards, we trigger a weird issue where
+ * GR will stop responding to PRI accesses after we've asked the
+ * SEC2 RTOS to boot the GR falcons. This happens with far more
+ * frequency when cold-booting a board (ie. returning from D3).
+ *
+ * The root cause for this is not known and has proven difficult
+ * to isolate, with many avenues being dead-ends.
+ *
+ * A workaround was discovered by Karol, whereby putting GR into
+ * reset for an extended period right before initialisation
+ * prevents the problem from occuring.
+ *
+ * XXX: As RM does not require any such workaround, this is more
+ * of a hack than a true fix.
+ */
+ reset = nvkm_boolopt(device->cfgopt, "NvGrResetWar", reset);
+ if (reset) {
+ nvkm_mask(device, 0x000200, 0x00001000, 0x00000000);
+ nvkm_rd32(device, 0x000200);
+ msleep(50);
+ nvkm_mask(device, 0x000200, 0x00001000, 0x00001000);
+ nvkm_rd32(device, 0x000200);
+ }
+
nvkm_pmu_pgob(gr->base.engine.subdev.device->pmu, false);

ret = nvkm_falcon_get(&gr->fecs.falcon, subdev);
--
2.20.1


\
 
 \ /
  Last update: 2020-04-22 12:29    [W:0.374 / U:1.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site