lkml.org 
[lkml]   [2020]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 0/2] PCI: Add new UniPhier PCIe endpoint driver
From
Date
On 2020/03/23 18:40, Kunihiko Hayashi wrote:
> This series adds PCIe endpoint controller driver for Socionext UniPhier
> SoCs. This controller is based on the DesignWare PCIe core.
>
> This driver supports Pro5 SoC only, so Pro5 needs multiple clocks and
> resets in devicetree node.
>
> Changes since v2:
> - dt-bindings: Add clock-names, reset-names, and fix example for Pro5
> - Remove 'is_legacy' indicating that the compatible is for legacy SoC
> - Use pci_epc_features instead of defining uniphier_soc_data
> - Remove redundant register read access
> - Clean up return code on uniphier_add_pcie_ep()
> - typo: intx -> INTx
>
> Changes since v1:
> - dt-bindings: Add Reviewed-by line
> - Fix register value to set EP mode
> - Add error message when failed to get phy
> - Replace INTx assertion time with macro
>
> Kunihiko Hayashi (2):
> dt-bindings: PCI: Add UniPhier PCIe endpoint controller description
> PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller
> driver
>
> .../devicetree/bindings/pci/uniphier-pcie-ep.txt | 53 +++
> MAINTAINERS | 4 +-
> drivers/pci/controller/dwc/Kconfig | 13 +-
> drivers/pci/controller/dwc/Makefile | 1 +
> drivers/pci/controller/dwc/pcie-uniphier-ep.c | 380 +++++++++++++++++++++
> 5 files changed, 447 insertions(+), 4 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pci/uniphier-pcie-ep.txt
> create mode 100644 drivers/pci/controller/dwc/pcie-uniphier-ep.c
>

Gentle ping.
Are there any comments about changes since v2?
v2: https://www.spinics.net/lists/linux-pci/msg92429.html

Thank you,

---
Best Regards
Kunihiko Hayashi

\
 
 \ /
  Last update: 2020-04-22 07:13    [W:1.701 / U:23.968 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site