lkml.org 
[lkml]   [2020]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] drm/sun4i: hdmi ddc clk: Fix size of m divider
Hi,

On Wed, Apr 15, 2020 at 07:52:28PM +0200, Jernej Škrabec wrote:
> Dne sreda, 15. april 2020 ob 12:42:14 CEST je Maxime Ripard napisal(a):
> > On Mon, Apr 13, 2020 at 06:09:08PM +0200, Jernej Škrabec wrote:
> > > Dne ponedeljek, 13. april 2020 ob 16:12:39 CEST je Chen-Yu Tsai
> napisal(a):
> > > > On Mon, Apr 13, 2020 at 6:11 PM Chen-Yu Tsai <wens@csie.org> wrote:
> > > > > On Mon, Apr 13, 2020 at 5:55 PM Jernej Skrabec
> > > > > <jernej.skrabec@siol.net>
> > >
> > > wrote:
> > > > > > m divider in DDC clock register is 4 bits wide. Fix that.
> > > > > >
> > > > > > Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support")
> > > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> > > > >
> > > > > Reviewed-by: Chen-Yu Tsai <wens@csie.org>
> > > >
> > > > Cc stable?
> > >
> > > I don't think it's necessary:
> > > 1. It doesn't change much (anything?) for me when reading EDID. I don't
> > > think it's super important to have precise DDC clock in order to properly
> > > read EDID. 2. No matter if it has "Cc stable" tag or not, it will be
> > > eventually picked for stable due to fixes tag.
> > >
> > > This was only small observation when I was researching EDID readout issue
> > > on A20 board, but sadly, I wasn't able to figure out why reading it
> > > sometimes fails. I noticed similar issue on SoCs with DE2 (most
> > > prominently on OrangePi PC2 - H5), but there was easy workaround - I just
> > > disabled video driver in U- Boot. However, if A20 display driver gets
> > > disabled in U-Boot, it totally breaks video output on my TV when Linux
> > > boots (no output). I guess there is more fundamental problem with clocks
> > > than just field size. I think we should add more constraints in clock
> > > driver, like preset some clock parents and not allow to change parents
> > > when setting rate, but carefully, so simplefb doesn't break. Such
> > > constraints should also solve problems with dual head setups.
> > I disagree here. Doing all sorts of special case just doesn't scale,
> > and we'll never have the special cases sorted out on all the boards
> > (and it's a nightmare to maintain).
> >
> > Especially since it's basically putting a blanket over the actual
> > issue and looking the other way. If there's something wrong with how
> > we deal with (re)parenting, we should fix that. It impacts more than
> > just DRM, and all the SoCs.
>
> I agree with you that automatic solution would be best, but I just don't see
> it how it would be done.

> Dual head display pipeline is pretty complex for clock driver to get it right
> on it's own. There are different possible setups and some of them are hot
> pluggable, like HDMI.

Do you have an actual scenario that is broken right now?

> And there are also SoC specific quirks, like A64, where for some reason, MIPI
> DPHY and HDMI PHY share same clock parent - PLL_VIDEO0. Technically, MIPI DPHY
> can be clocked from PLL_PERIPH0 (fixed to 600 MHz), but that's not really
> helpful. I'm not even sure if there is any good solution to this - certainly
> HDMI and MIPI can't claim exclusivity and somehow best common rate must be
> found for PLL_VIDEO0, if that's even possible.

IIRC the DSI DPHY needs a clock running at 297MHz, which is pretty much what the
HDMI PHY should need too (or 148.5, but that's pretty easy to generate from
297). So which problem do we have there?

> I was sure that HDMI PHY on A64 can be clocked from PLL_VIDEO1, which would
> solve main issue, but to date, I didn't find any way to do that.
>
> That's pretty off topic, so I hope original patch can be merged as-is.

It does, sorry

Acked-by: Maxime Ripard <maxime@cerno.tech>

Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-04-22 11:23    [W:0.097 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site