lkml.org 
[lkml]   [2020]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2 6/7] net: macb: WoL support for GEM type of Ethernet controller
From
Date
On 21/04/2020 at 17:13, Claudiu Beznea - M18063 wrote:
> Hi Nicolas,

Claudiu,

Thanks for your feedback.

> On 21.04.2020 13:41, nicolas.ferre@microchip.com wrote:
>> From: Nicolas Ferre <nicolas.ferre@microchip.com>
>>
>> Adapt the Wake-on-Lan feature to the Cadence GEM Ethernet controller.
>> This controller has different register layout and cannot be handled by
>> previous code.
>> We disable completely interrupts on all the queues but the queue 0.
>> Handling of WoL interrupt is done in another interrupt handler
>> positioned depending on the controller version used, just between
>> suspend() and resume() calls.
>> It allows to lower pressure on the generic interrupt hot path by
>> removing the need to handle 2 tests for each IRQ: the first figuring out
>> the controller revision, the second for actually knowing if the WoL bit
>> is set.
>>
>> Queue management in suspend()/resume() functions inspired from RFC patch
>> by Harini Katakam <harinik@xilinx.com>, thanks!
>>
>> Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
>> Cc: Harini Katakam <harini.katakam@xilinx.com>
>> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
>> ---
>> Changes in v2:
>> - Addition of pm_wakeup_event() in WoL IRQ
>> - In macb_resume(), removal of setting the MPE bit in NCR register which is not
>> needed in any case: IP is reset on the usual path and kept alive if WoL is used
>> - In macb_resume(), complete reset of the controller is kept only for non-WoL
>> case. For the WoL case, we only replace the usual IRQ handler.
>>
>> drivers/net/ethernet/cadence/macb.h | 3 +
>> drivers/net/ethernet/cadence/macb_main.c | 134 ++++++++++++++++++++---
>> 2 files changed, 119 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
>> index ab827fb4b6b9..4f1b41569260 100644
>> --- a/drivers/net/ethernet/cadence/macb.h
>> +++ b/drivers/net/ethernet/cadence/macb.h
>> @@ -90,6 +90,7 @@
>> #define GEM_SA3T 0x009C /* Specific3 Top */
>> #define GEM_SA4B 0x00A0 /* Specific4 Bottom */
>> #define GEM_SA4T 0x00A4 /* Specific4 Top */
>> +#define GEM_WOL 0x00b8 /* Wake on LAN */
>> #define GEM_EFTSH 0x00e8 /* PTP Event Frame Transmitted Seconds Register 47:32 */
>> #define GEM_EFRSH 0x00ec /* PTP Event Frame Received Seconds Register 47:32 */
>> #define GEM_PEFTSH 0x00f0 /* PTP Peer Event Frame Transmitted Seconds Register 47:32 */
>> @@ -396,6 +397,8 @@
>> #define MACB_PDRSFT_SIZE 1
>> #define MACB_SRI_OFFSET 26 /* TSU Seconds Register Increment */
>> #define MACB_SRI_SIZE 1
>> +#define GEM_WOL_OFFSET 28 /* Enable wake-on-lan interrupt */
>> +#define GEM_WOL_SIZE 1
>>
>> /* Timer increment fields */
>> #define MACB_TI_CNS_OFFSET 0
>> diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
>> index 8cf8e21fbb07..56ce39dd1cc0 100644
>> --- a/drivers/net/ethernet/cadence/macb_main.c
>> +++ b/drivers/net/ethernet/cadence/macb_main.c
>> @@ -1513,6 +1513,35 @@ static void macb_tx_restart(struct macb_queue *queue)
>> macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(TSTART));
>> }
>>
>> +static irqreturn_t gem_wol_interrupt(int irq, void *dev_id)
>> +{
>> + struct macb_queue *queue = dev_id;
>> + struct macb *bp = queue->bp;
>> + u32 status;
>> +
>> + status = queue_readl(queue, ISR);
>> +
>> + if (unlikely(!status))
>> + return IRQ_NONE;
>> +
>> + spin_lock(&bp->lock);
>> +
>> + if (status & GEM_BIT(WOL)) {
>> + queue_writel(queue, IDR, GEM_BIT(WOL));
>> + gem_writel(bp, WOL, 0);
>> + netdev_vdbg(bp->dev, "GEM WoL: queue = %u, isr = 0x%08lx\n",
>> + (unsigned int)(queue - bp->queues),
>> + (unsigned long)status);
>> + if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
>> + queue_writel(queue, ISR, GEM_BIT(WOL));
>> + pm_wakeup_event(&bp->pdev->dev, 0);
>> + }
>> +
>> + spin_unlock(&bp->lock);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> static irqreturn_t macb_interrupt(int irq, void *dev_id)
>> {
>> struct macb_queue *queue = dev_id;
>> @@ -3306,6 +3335,8 @@ static const struct ethtool_ops macb_ethtool_ops = {
>> static const struct ethtool_ops gem_ethtool_ops = {
>> .get_regs_len = macb_get_regs_len,
>> .get_regs = macb_get_regs,
>> + .get_wol = macb_get_wol,
>> + .set_wol = macb_set_wol,
>> .get_link = ethtool_op_get_link,
>> .get_ts_info = macb_get_ts_info,
>> .get_ethtool_stats = gem_get_ethtool_stats,
>> @@ -4534,20 +4565,54 @@ static int __maybe_unused macb_suspend(struct device *dev)
>> struct macb_queue *queue = bp->queues;
>> unsigned long flags;
>> unsigned int q;
>> + int err;
>>
>> if (!netif_running(netdev))
>> return 0;
>>
>> if (bp->wol & MACB_WOL_ENABLED) {
>> - macb_writel(bp, IER, MACB_BIT(WOL));
>> - macb_writel(bp, WOL, MACB_BIT(MAG));
>> - enable_irq_wake(bp->queues[0].irq);
>> - netif_device_detach(netdev);
>> - } else {
>> - netif_device_detach(netdev);
>> + spin_lock_irqsave(&bp->lock, flags);
>> + /* Flush all status bits */
>> + macb_writel(bp, TSR, -1);
>> + macb_writel(bp, RSR, -1);
>> for (q = 0, queue = bp->queues; q < bp->num_queues;
>> - ++q, ++queue)
>> - napi_disable(&queue->napi);
>> + ++q, ++queue) {
>> + /* Disable all interrupts */
>> + queue_writel(queue, IDR, -1);
>> + queue_readl(queue, ISR);
>> + if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
>> + queue_writel(queue, ISR, -1);
>> + }
>> + /* Change interrupt handler and
>> + * Enable WoL IRQ on queue 0
>> + */
>> + if (macb_is_gem(bp)) {
>
> Couldn't this starting here:
>
>> + devm_free_irq(dev, bp->queues[0].irq, bp->queues);
>> + err = devm_request_irq(dev, bp->queues[0].irq, gem_wol_interrupt,
>> + IRQF_SHARED, netdev->name, bp->queues);
>> + if (err) {
>> + dev_err(dev,
>> + "Unable to request IRQ %d (error %d)\n",
>> + bp->queues[0].irq, err);
>> + return err;
>> + }
>
> ending ^ (and the equivalent in resume function) be avoided by moving the
> content of gem_wol_interrupt:
>
> + if (status & GEM_BIT(WOL)) {
> + queue_writel(queue, IDR, GEM_BIT(WOL));
> + gem_writel(bp, WOL, 0);
> + netdev_vdbg(bp->dev, "GEM WoL: queue = %u, isr = 0x%08lx\n",
> + (unsigned int)(queue - bp->queues),
> + (unsigned long)status);
> + if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
> + queue_writel(queue, ISR, GEM_BIT(WOL));
> + pm_wakeup_event(&bp->pdev->dev, 0);
> + }
>
> at the beginning of macb_interrupt() and issuing a return after
> pm_wakeup_event()?
>
> Instead of these:
>
>> + queue_writel(bp->queues, IER, GEM_BIT(WOL));
>> + gem_writel(bp, WOL, MACB_BIT(MAG));
>> + } else {
>> + queue_writel(bp->queues, IER, MACB_BIT(WOL));
>> + macb_writel(bp, WOL, MACB_BIT(MAG));
>> + }
>
> You could use:
> queue_writel(bp->queues, IER, GEM_BIT(WOL));
> macb_or_gem_writel(bp, WOL, MACB_BIT(MAG))

This was my first though, even if it added one more test to the
interrupt routine even when WoL is not enabled.

But where it's becoming annoying is that what you highlight above as:
if (status & GEM_BIT(WOL))
for GEM, is actually:
if (status & MACB_BIT(WOL))
for MACB...
which means that we have to test controller's revision for each
interrupt before knowing if the WoL one is activated or not. To my mind,
it's really loosing CPU power where we are already chasing for it in our
little SoC configurations. Moreover for something which is fairly
specialized to some use cases.

If found a solution by specializing the IRQ routine just during
suspend/resume.


>> + spin_unlock_irqrestore(&bp->lock, flags);
>> +
>> + enable_irq_wake(bp->queues[0].irq);
>> + }
>> +
>> + netif_device_detach(netdev);
>> + for (q = 0, queue = bp->queues; q < bp->num_queues;
>> + ++q, ++queue)
>> + napi_disable(&queue->napi);
>> +
>> + if (!(bp->wol & MACB_WOL_ENABLED)) {
>> rtnl_lock();
>> phylink_stop(bp->phylink);
>> rtnl_unlock();
>> @@ -4575,7 +4640,9 @@ static int __maybe_unused macb_resume(struct device *dev)
>> struct net_device *netdev = dev_get_drvdata(dev);
>> struct macb *bp = netdev_priv(netdev);
>> struct macb_queue *queue = bp->queues;
>> + unsigned long flags;
>> unsigned int q;
>> + int err;
>>
>> if (!netif_running(netdev))
>> return 0;
>> @@ -4584,29 +4651,60 @@ static int __maybe_unused macb_resume(struct device *dev)
>> pm_runtime_force_resume(dev);
>>
>> if (bp->wol & MACB_WOL_ENABLED) {
>> - macb_writel(bp, IDR, MACB_BIT(WOL));
>> - macb_writel(bp, WOL, 0);
>> + spin_lock_irqsave(&bp->lock, flags);
>> + /* Disable WoL */
>> + if (macb_is_gem(bp)) {
>> + queue_writel(bp->queues, IDR, GEM_BIT(WOL));
>> + gem_writel(bp, WOL, 0);
>> + } else {
>> + queue_writel(bp->queues, IDR, MACB_BIT(WOL));
>> + macb_writel(bp, WOL, 0);
>> + }
>> + /* Clear ISR on queue 0 */
>> + queue_readl(bp->queues, ISR);
>> + if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
>> + queue_writel(bp->queues, ISR, -1);
>> + /* Replace interrupt handler on queue 0 */
>> + devm_free_irq(dev, bp->queues[0].irq, bp->queues);
>> + err = devm_request_irq(dev, bp->queues[0].irq, macb_interrupt,
>> + IRQF_SHARED, netdev->name, bp->queues);
>> + if (err) {
>> + dev_err(dev,
>> + "Unable to request IRQ %d (error %d)\n",
>> + bp->queues[0].irq, err);
>> + return err;
>> + }
>> + /* Enable interrupts */
>> + for (q = 0, queue = bp->queues; q < bp->num_queues;
>> + ++q, ++queue)
>> + queue_writel(queue, IER,
>> + bp->rx_intr_mask |
>> + MACB_TX_INT_FLAGS |
>> + MACB_BIT(HRESP));
>> + spin_unlock_irqrestore(&bp->lock, flags);
>> +
>> disable_irq_wake(bp->queues[0].irq);
>> - } else {
>> - macb_writel(bp, NCR, MACB_BIT(MPE));
>> + }
>> +
>> + for (q = 0, queue = bp->queues; q < bp->num_queues;
>> + ++q, ++queue)
>> + napi_enable(&queue->napi);
>>
>> + if (!(bp->wol & MACB_WOL_ENABLED)) {
>> if (netdev->hw_features & NETIF_F_NTUPLE)
>> gem_writel_n(bp, ETHT, SCRT2_ETHT, bp->pm_data.scrt2);
>>
>> if (!(bp->caps & MACB_CAPS_USRIO_DISABLED))
>> macb_or_gem_writel(bp, USRIO, bp->pm_data.usrio);
>>
>> - for (q = 0, queue = bp->queues; q < bp->num_queues;
>> - ++q, ++queue)
>> - napi_enable(&queue->napi);
>> + macb_init_hw(bp);
>> + macb_set_rx_mode(netdev);
>> + macb_restore_features(bp);
>
> Even WoL may not be available in backup and self-refresh mode (present on
> SAMA5D2 devices), switching to BSR mode while WoL is enabled may lead to
> ethernet being unavailable after resuming. Did you manage to test this
> scenario?

WoL is not available for BSR. But... it's an interesting scenario indeed
;-) Which I didn't test.

I have to think about it and come back with a solution to this. Thanks
Claudiu for having found that.

>> rtnl_lock();
>> phylink_start(bp->phylink);
>> rtnl_unlock();
>> }
>>
>> - macb_init_hw(bp);
>> - macb_set_rx_mode(netdev);
>> - macb_restore_features(bp);
>> netif_device_attach(netdev);
>> if (bp->ptp_info)
>> bp->ptp_info->ptp_init(netdev);

Best regards,
--
Nicolas Ferre

\
 
 \ /
  Last update: 2020-04-21 17:39    [W:0.166 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site