lkml.org 
[lkml]   [2020]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: Unrecoverable AER error when resuming from RAM (hda regression in 5.7-rc2)
On Tue, 21 Apr 2020 21:08:44 +0200,
Alex Xu (Hello71) wrote:
>
> With 5.7-rc2, after resuming from suspend to RAM, I get:
>
> [ 55.679382] pcieport 0000:00:03.1: AER: Multiple Uncorrected (Non-Fatal) error received: 0000:00:00.0
> [ 55.679405] pcieport 0000:00:03.1: AER: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID)
> [ 55.679410] pcieport 0000:00:03.1: AER: device [1022:1453] error status/mask=00100000/04400000
> [ 55.679414] pcieport 0000:00:03.1: AER: [20] UnsupReq (First)
> [ 55.679417] pcieport 0000:00:03.1: AER: TLP Header: 40000004 0a0000ff fffc0e80 00000000
> [ 55.679423] amdgpu 0000:0a:00.0: AER: can't recover (no error_detected callback)
> [ 55.679425] snd_hda_intel 0000:0a:00.1: AER: can't recover (no error_detected callback)
> [ 55.679455] pcieport 0000:00:03.1: AER: device recovery failed
>
> Then the display freezes and the system basically falls apart (can't
> even sudo reboot -f, need to use magic sysrq).
>
> I bisected this to "ALSA: hda: Skip controller resume if not needed".
> Setting snd_hda_intel.power_save=0 resolves the issue.

Hrm, it means the condition to skip the controller resume doesn't fit
well. Does the patch below help?

But looking at the dmesg output:
> [ 1.021452] snd_hda_codec_generic hdaudioC0D0: ignore pin 0x7, too many assigned pins
> [ 1.021461] snd_hda_codec_generic hdaudioC0D0: ignore pin 0x9, too many assigned pins
> [ 1.021471] snd_hda_codec_generic hdaudioC0D0: ignore pin 0xb, too many assigned pins
> [ 1.021480] snd_hda_codec_generic hdaudioC0D0: ignore pin 0xd, too many assigned pins
> [ 1.021482] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
> [ 1.021482] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [ 1.021483] snd_hda_codec_generic hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [ 1.021484] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
> [ 1.021484] snd_hda_codec_generic hdaudioC0D0: dig-out=0x3/0x5
> [ 1.021485] snd_hda_codec_generic hdaudioC0D0: inputs:

... it looks like snd-hda-codec-generic is used for HDMI/DP codec.
This can't work well. Did you enable CONFIG_SND_HDA_HDMI?

In anyway, please give alsa-info.sh output. Run the script with
--no-upload option and attach the output.


thanks,

Takashi

---
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1060,7 +1060,7 @@ static int azx_resume(struct device *dev)

/* check for the forced resume */
list_for_each_codec(codec, &chip->bus) {
- if (hda_codec_need_resume(codec)) {
+ if (!codec->relaxed_resume) {
forced_resume = true;
break;
}
\
 
 \ /
  Last update: 2020-04-21 21:41    [W:0.336 / U:0.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site