lkml.org 
[lkml]   [2020]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 00/10] Multiple fixes in PCIe qcom driver
Date
This contains multiple fix for PCIe qcom driver.
Some optional reset and clocks were missing.
Fix a problem with no PARF programming that cause kernel lock on load.
Add support to force gen 1 speed if needed. (due to hardware limitation)
Add ipq8064 rev 2 support that use a different tx termination offset.

v2:
* Drop iATU programming (already done in pcie init)
* Use max-link-speed instead of force-gen1 custom definition
* Drop MRRS to 256B (Can't find a realy reason why this was suggested)
* Introduce a new variant for different revision of ipq8064

Abhishek Sahu (1):
PCIe: qcom: change duplicate PCI reset to phy reset

Ansuel Smith (7):
PCIe: qcom: add missing ipq806x clocks in PCIe driver
devicetree: bindings: pci: add missing clks to qcom,pcie
PCIe: qcom: Fixed pcie_phy_clk branch issue
PCIe: qcom: add missing reset for ipq806x
devicetree: bindings: pci: add ext reset to qcom,pcie
PCIe: qcom: fix init problem with missing PARF programming
devicetree: bindings: pci: add ipq8064 rev 2 variant to qcom,pcie

Sham Muthayyan (2):
PCIe: qcom: add ipq8064 rev2 variant and set tx term offset
PCIe: qcom: add Force GEN1 support

.../devicetree/bindings/pci/qcom,pcie.txt | 56 +++++++-
drivers/pci/controller/dwc/pcie-qcom.c | 134 +++++++++++++++---
2 files changed, 167 insertions(+), 23 deletions(-)

--
2.25.1

\
 
 \ /
  Last update: 2020-04-02 14:13    [W:0.128 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site