lkml.org 
[lkml]   [2020]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] fpga: zynq: Add AFI config driver
Date
This patch Adds AFI config driver. This is useful for
the PS to PL configuration for the fpga manager On zynq
platform.

Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
---
drivers/fpga/Kconfig | 8 +++++
drivers/fpga/Makefile | 1 +
drivers/fpga/zynq-afi.c | 81 +++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 90 insertions(+)
create mode 100644 drivers/fpga/zynq-afi.c

diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 474f304e..60982a0 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -214,4 +214,12 @@ config FPGA_MGR_ZYNQMP_FPGA
to configure the programmable logic(PL) through PS
on ZynqMP SoC.

+config FPGA_MGR_ZYNQ_AFI_FPGA
+ bool "Xilinx AFI FPGA"
+ depends on FPGA_MGR_ZYNQ_FPGA
+ help
+ Zynq AFI driver support for writing to the AFI registers
+ for configuring the PS_PL interface. For some of the bitstream
+ or designs to work the PS to PL interfaces need to be configured
+ like the data bus-width etc.
endif # FPGA
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 312b937..d115e29 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o
obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE) += altera-hps2fpga.o altera-fpga2sdram.o
obj-$(CONFIG_ALTERA_FREEZE_BRIDGE) += altera-freeze-bridge.o
obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o
+obj-$(CONFIG_FPGA_MGR_ZYNQ_AFI_FPGA) += zynq-afi.o

# High Level Interfaces
obj-$(CONFIG_FPGA_REGION) += fpga-region.o
diff --git a/drivers/fpga/zynq-afi.c b/drivers/fpga/zynq-afi.c
new file mode 100644
index 0000000..7ce0d08
--- /dev/null
+++ b/drivers/fpga/zynq-afi.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx FPGA AFI driver.
+ * Copyright (c) 2018 Xilinx Inc.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+/* Registers and special values for doing register-based operations */
+#define AFI_RDCHAN_CTRL_OFFSET 0x00
+#define AFI_WRCHAN_CTRL_OFFSET 0x14
+
+#define AFI_BUSWIDTH_MASK 0x01
+
+/**
+ * struct afi_fpga - AFI register description
+ * @membase: pointer to register struct
+ * @afi_width: AFI bus width to be written
+ */
+struct zynq_afi_fpga {
+ void __iomem *membase;
+ u32 afi_width;
+};
+
+static int zynq_afi_fpga_probe(struct platform_device *pdev)
+{
+ struct zynq_afi_fpga *afi_fpga;
+ struct resource *res;
+ u32 reg_val;
+ u32 val;
+
+ afi_fpga = devm_kzalloc(&pdev->dev, sizeof(*afi_fpga), GFP_KERNEL);
+ if (!afi_fpga)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ afi_fpga->membase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(afi_fpga->membase))
+ return PTR_ERR(afi_fpga->membase);
+
+ val = device_property_read_u32(&pdev->dev, "xlnx,afi-width",
+ &afi_fpga->afi_width);
+ if (val) {
+ dev_err(&pdev->dev, "Fail to get the afi bus width\n");
+ return -EINVAL;
+ }
+
+ reg_val = readl(afi_fpga->membase + AFI_RDCHAN_CTRL_OFFSET);
+ reg_val &= ~AFI_BUSWIDTH_MASK;
+ writel(reg_val | afi_fpga->afi_width,
+ afi_fpga->membase + AFI_RDCHAN_CTRL_OFFSET);
+ reg_val = readl(afi_fpga->membase + AFI_WRCHAN_CTRL_OFFSET);
+ reg_val &= ~AFI_BUSWIDTH_MASK;
+ writel(reg_val | afi_fpga->afi_width,
+ afi_fpga->membase + AFI_WRCHAN_CTRL_OFFSET);
+
+ return 0;
+}
+
+static const struct of_device_id zynq_afi_fpga_ids[] = {
+ { .compatible = "xlnx,zynq-afi-fpga" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, zynq_afi_fpga_ids);
+
+static struct platform_driver zynq_afi_fpga_driver = {
+ .driver = {
+ .name = "zynq-afi-fpga",
+ .of_match_table = zynq_afi_fpga_ids,
+ },
+ .probe = zynq_afi_fpga_probe,
+};
+module_platform_driver(zynq_afi_fpga_driver);
+
+MODULE_DESCRIPTION("ZYNQ FPGA AFI module");
+MODULE_AUTHOR("Nava kishore Manne <nava.manne@xilinx.com>");
+MODULE_LICENSE("GPL v2");
--
2.7.4
\
 
 \ /
  Last update: 2020-04-15 12:35    [W:0.087 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site