lkml.org 
[lkml]   [2020]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: rockchip: add isp and sensors for scarlet
Date
From: Eddie Cai <eddie.cai.linux@gmail.com>

Enable ISP and camera sensor ov2685 and ov5695 for scarlet.

Verified with:
make ARCH=arm64 dtbs_check

Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
---
This patch is based on:
https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/527854

It should be merged after moving the bidings out of staging:
https://patchwork.kernel.org/project/linux-media/list/?series=266089
---
.../boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 74 +++++++++++++++++++
1 file changed, 74 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index 4373ed732af76..ae08205aa8e24 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -296,6 +296,52 @@ camera: &i2c7 {

/* 24M mclk is shared between world and user cameras */
pinctrl-0 = <&i2c7_xfer &test_clkout1>;
+
+ /* Rear-facing camera */
+ wcam: camera@36 {
+ compatible = "ovti,ov5695";
+ reg = <0x36>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wcam_rst>;
+
+ clocks = <&cru SCLK_TESTCLKOUT1>;
+ clock-names = "xvclk";
+
+ avdd-supply = <&pp2800_cam>;
+ dvdd-supply = <&pp1250_cam>;
+ dovdd-supply = <&pp1800_s0>;
+ reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+
+ port {
+ wcam_out: endpoint {
+ remote-endpoint = <&mipi_in_wcam>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+
+ /* Front-facing camera */
+ ucam: camera@3c {
+ compatible = "ovti,ov2685";
+ reg = <0x3c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ucam_rst>;
+
+ clocks = <&cru SCLK_TESTCLKOUT1>;
+ clock-names = "xvclk";
+
+ avdd-supply = <&pp2800_cam>;
+ dovdd-supply = <&pp1800_s0>;
+ dvdd-supply = <&pp1800_s0>;
+ reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+
+ port {
+ ucam_out: endpoint {
+ remote-endpoint = <&mipi_in_ucam>;
+ data-lanes = <1>;
+ };
+ };
+ };
};

&cdn_dp {
@@ -353,10 +399,38 @@ &io_domains {
gpio1830-supply = <&pp1800_s0>; /* APIO4_VDD; 4c 4d */
};

+&isp0 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ mipi_in_wcam: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&wcam_out>;
+ data-lanes = <1 2>;
+ };
+
+ mipi_in_ucam: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&ucam_out>;
+ data-lanes = <1>;
+ };
+ };
+ };
+};
+
+&isp0_mmu {
+ status = "okay";
+};
+
&max98357a {
sdmode-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
};

+&mipi_dphy_rx0 {
+ status = "okay";
+};
+
&mipi_dsi {
status = "okay";
clock-master;
--
2.26.0
\
 
 \ /
  Last update: 2020-04-14 16:07    [W:0.031 / U:1.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site