lkml.org 
[lkml]   [2020]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/3] soc: qcom: rpmh: Allow RPMH driver to be loaded as a module
On Thu 26 Mar 15:44 PDT 2020, John Stultz wrote:

> This patch allow the rpmh driver to be loaded as a permenent
> module. Meaning it can be loaded from a module, but then cannot
> be unloaded.
>
> Ideally, it would include a remove hook and related logic, but
> the rpmh driver is fairly core to the system, so once its loaded
> with almost anythign else to get the system to go, the dependencies
> are not likely to ever also be removed.
>
> So making it a permenent module at least improves things slightly
> over requiring it to be a built in driver.
>
> Feedback would be appreciated!
>
> Cc: Todd Kjos <tkjos@google.com>
> Cc: Saravana Kannan <saravanak@google.com>
> Cc: Andy Gross <agross@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Rajendra Nayak <rnayak@codeaurora.org>
> Cc: linux-arm-msm@vger.kernel.org
> Signed-off-by: John Stultz <john.stultz@linaro.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

and applied.

Regards,
Bjorn

> ---
> drivers/soc/qcom/Kconfig | 2 +-
> drivers/soc/qcom/rpmh-rsc.c | 6 ++++++
> 2 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index af774555b9d2..ac91eaf810f7 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -104,7 +104,7 @@ config QCOM_RMTFS_MEM
> Say y here if you intend to boot the modem remoteproc.
>
> config QCOM_RPMH
> - bool "Qualcomm RPM-Hardened (RPMH) Communication"
> + tristate "Qualcomm RPM-Hardened (RPMH) Communication"
> depends on ARCH_QCOM && ARM64 || COMPILE_TEST
> help
> Support for communication with the hardened-RPM blocks in
> diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
> index e278fc11fe5c..30585d98fdf1 100644
> --- a/drivers/soc/qcom/rpmh-rsc.c
> +++ b/drivers/soc/qcom/rpmh-rsc.c
> @@ -11,6 +11,7 @@
> #include <linux/io.h>
> #include <linux/kernel.h>
> #include <linux/list.h>
> +#include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_irq.h>
> #include <linux/of_platform.h>
> @@ -679,6 +680,8 @@ static const struct of_device_id rpmh_drv_match[] = {
> { .compatible = "qcom,rpmh-rsc", },
> { }
> };
> +MODULE_DEVICE_TABLE(of, rpmh_drv_match);
> +
>
> static struct platform_driver rpmh_driver = {
> .probe = rpmh_rsc_probe,
> @@ -693,3 +696,6 @@ static int __init rpmh_driver_init(void)
> return platform_driver_register(&rpmh_driver);
> }
> arch_initcall(rpmh_driver_init);
> +
> +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. RPMh Driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2020-04-15 00:24    [W:0.158 / U:30.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site