lkml.org 
[lkml]   [2020]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 05/22] dt-bindings: host1x: Document new interconnect properties
On Mon, Mar 30, 2020 at 04:08:47AM +0300, Dmitry Osipenko wrote:
> Most of Host1x devices have at least one memory client. These clients
> are directly connected to the memory controller. The new interconnect
> properties represent the memory client's connection to the memory
> controller.
>
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
> .../display/tegra/nvidia,tegra20-host1x.txt | 68 +++++++++++++++++++
> 1 file changed, 68 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
> index 9999255ac5b6..d92d4e814d77 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
> @@ -20,6 +20,10 @@ Required properties:
> - reset-names: Must include the following entries:
> - host1x
>
> +Each host1x client module having to perform DMA through the Memory Controller
> +should have the interconnect endpoints set to the Memory Client and External
> +Memory respectively.
> +
> The host1x top-level node defines a number of children, each representing one
> of the following host1x client modules:
>
> @@ -36,6 +40,12 @@ of the following host1x client modules:
> - reset-names: Must include the following entries:
> - mpe
>
> + Optional properties:
> + - interconnects: Must contain entry for the MPE memory clients.
> + - interconnect-names: Must include name of the interconnect path for each
> + interconnect entry. Consult TRM documentation for information about
> + available memory clients.

Is the TRM public? Perhaps refer to the header.

> +
> - vi: video input
>
> Required properties:
> @@ -49,6 +59,12 @@ of the following host1x client modules:
> - reset-names: Must include the following entries:
> - vi
>
> + Optional properties:
> + - interconnects: Must contain entry for the VI memory clients.
> + - interconnect-names: Must include name of the interconnect path for each
> + interconnect entry. Consult TRM documentation for information about
> + available memory clients.
> +
> - epp: encoder pre-processor
>
> Required properties:
> @@ -62,6 +78,12 @@ of the following host1x client modules:
> - reset-names: Must include the following entries:
> - epp
>
> + Optional properties:
> + - interconnects: Must contain entry for the EPP memory clients.
> + - interconnect-names: Must include name of the interconnect path for each
> + interconnect entry. Consult TRM documentation for information about
> + available memory clients.
> +
> - isp: image signal processor
>
> Required properties:
> @@ -75,6 +97,12 @@ of the following host1x client modules:
> - reset-names: Must include the following entries:
> - isp
>
> + Optional properties:
> + - interconnects: Must contain entry for the ISP memory clients.
> + - interconnect-names: Must include name of the interconnect path for each
> + interconnect entry. Consult TRM documentation for information about
> + available memory clients.
> +
> - gr2d: 2D graphics engine
>
> Required properties:
> @@ -88,6 +116,12 @@ of the following host1x client modules:
> - reset-names: Must include the following entries:
> - 2d
>
> + Optional properties:
> + - interconnects: Must contain entry for the GR2D memory clients.
> + - interconnect-names: Must include name of the interconnect path for each
> + interconnect entry. Consult TRM documentation for information about
> + available memory clients.
> +
> - gr3d: 3D graphics engine
>
> Required properties:
> @@ -106,6 +140,12 @@ of the following host1x client modules:
> - 3d
> - 3d2 (Only required on SoCs with two 3D clocks)
>
> + Optional properties:
> + - interconnects: Must contain entry for the GR3D memory clients.
> + - interconnect-names: Must include name of the interconnect path for each
> + interconnect entry. Consult TRM documentation for information about
> + available memory clients.
> +
> - dc: display controller
>
> Required properties:
> @@ -133,6 +173,10 @@ of the following host1x client modules:
> - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
> - nvidia,edid: supplies a binary EDID blob
> - nvidia,panel: phandle of a display panel
> + - interconnects: Must contain entry for the DC memory clients.
> + - interconnect-names: Must include name of the interconnect path for each
> + interconnect entry. Consult TRM documentation for information about
> + available memory clients.
>
> - hdmi: High Definition Multimedia Interface
>
> @@ -281,6 +325,12 @@ of the following host1x client modules:
> - reset-names: Must include the following entries:
> - vic
>
> + Optional properties:
> + - interconnects: Must contain entry for the VIC memory clients.
> + - interconnect-names: Must include name of the interconnect path for each
> + interconnect entry. Consult TRM documentation for information about
> + available memory clients.
> +
> Example:
>
> / {
> @@ -363,6 +413,15 @@ Example:
> resets = <&tegra_car 27>;
> reset-names = "dc";
>
> + interconnects = <&mc TEGRA20_MC_DISPLAY0A &emc>,
> + <&mc TEGRA20_MC_DISPLAY0B &emc>,
> + <&mc TEGRA20_MC_DISPLAY0C &emc>,
> + <&mc TEGRA20_MC_DISPLAY1B &emc>;
> + interconnect-names = "display0a",
> + "display0b",
> + "display0c",
> + "display1b";
> +
> rgb {
> status = "disabled";
> };
> @@ -378,6 +437,15 @@ Example:
> resets = <&tegra_car 26>;
> reset-names = "dc";
>
> + interconnects = <&mc TEGRA20_MC_DISPLAY0AB &emc>,
> + <&mc TEGRA20_MC_DISPLAY0BB &emc>,
> + <&mc TEGRA20_MC_DISPLAY0CB &emc>,
> + <&mc TEGRA20_MC_DISPLAY1BB &emc>;
> + interconnect-names = "display0a",
> + "display0b",
> + "display0c",
> + "display1b";
> +
> rgb {
> status = "disabled";
> };
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2020-04-10 19:39    [W:0.184 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site