lkml.org 
[lkml]   [2020]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/7] PM: sleep: core: Rename DPM_FLAG_LEAVE_SUSPENDED
Date
From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

Rename DPM_FLAG_LEAVE_SUSPENDED to DPM_FLAG_MAY_SKIP_RESUME which
matches its purpose more closely.

No functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
Documentation/driver-api/pm/devices.rst | 4 ++--
Documentation/power/pci.rst | 2 +-
drivers/acpi/acpi_tad.c | 2 +-
drivers/base/power/main.c | 2 +-
drivers/i2c/busses/i2c-designware-platdrv.c | 2 +-
include/linux/pm.h | 6 +++---
6 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/Documentation/driver-api/pm/devices.rst b/Documentation/driver-api/pm/devices.rst
index 4ace0eba4506..f342c7549b4c 100644
--- a/Documentation/driver-api/pm/devices.rst
+++ b/Documentation/driver-api/pm/devices.rst
@@ -803,7 +803,7 @@ general.]
However, it often is desirable to leave devices in suspend after system
transitions to the working state, especially if those devices had been in
runtime suspend before the preceding system-wide suspend (or analogous)
-transition. Device drivers can use the ``DPM_FLAG_LEAVE_SUSPENDED`` flag to
+transition. Device drivers can use the ``DPM_FLAG_MAY_SKIP_RESUME`` flag to
indicate to the PM core (and middle-layer code) that they prefer the specific
devices handled by them to be left suspended and they have no problems with
skipping their system-wide resume callbacks for this reason. Whether or not the
@@ -825,7 +825,7 @@ device really can be left in suspend.

For devices whose "noirq", "late" and "early" driver callbacks are invoked
directly by the PM core, all of the system-wide resume callbacks are skipped if
-``DPM_FLAG_LEAVE_SUSPENDED`` is set and the device is in runtime suspend during
+``DPM_FLAG_MAY_SKIP_RESUME`` is set and the device is in runtime suspend during
the ``suspend_noirq`` (or analogous) phase or the transition under way is a
proper system suspend (rather than anything related to hibernation) and the
device's wakeup settings are suitable for runtime PM (that is, it cannot
diff --git a/Documentation/power/pci.rst b/Documentation/power/pci.rst
index 9e1408121bea..f09b382b4621 100644
--- a/Documentation/power/pci.rst
+++ b/Documentation/power/pci.rst
@@ -1029,7 +1029,7 @@ into D0 going forward), but if it is in runtime suspend in pci_pm_thaw_noirq(),
the function will set the power.direct_complete flag for it (to make the PM core
skip the subsequent "thaw" callbacks for it) and return.

-Setting the DPM_FLAG_LEAVE_SUSPENDED flag means that the driver prefers the
+Setting the DPM_FLAG_MAY_SKIP_RESUME flag means that the driver prefers the
device to be left in suspend after system-wide transitions to the working state.
This flag is checked by the PM core, but the PCI bus type informs the PM core
which devices may be left in suspend from its perspective (that happens during
diff --git a/drivers/acpi/acpi_tad.c b/drivers/acpi/acpi_tad.c
index 33a4bcdaa4d7..7d45cce0c3c1 100644
--- a/drivers/acpi/acpi_tad.c
+++ b/drivers/acpi/acpi_tad.c
@@ -624,7 +624,7 @@ static int acpi_tad_probe(struct platform_device *pdev)
*/
device_init_wakeup(dev, true);
dev_pm_set_driver_flags(dev, DPM_FLAG_SMART_SUSPEND |
- DPM_FLAG_LEAVE_SUSPENDED);
+ DPM_FLAG_MAY_SKIP_RESUME);
/*
* The platform bus type layer tells the ACPI PM domain powers up the
* device, so set the runtime PM status of it to "active".
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index aa9c8df9fc4b..b6f785024b24 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -1247,7 +1247,7 @@ static int __device_suspend_noirq(struct device *dev, pm_message_t state, bool a
* to be skipped.
*/
if (atomic_read(&dev->power.usage_count) > 1 ||
- !(dev_pm_test_driver_flags(dev, DPM_FLAG_LEAVE_SUSPENDED) &&
+ !(dev_pm_test_driver_flags(dev, DPM_FLAG_MAY_SKIP_RESUME) &&
dev->power.may_skip_resume))
dev->power.must_resume = true;

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index c98befe2a92e..b6270e69f853 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -357,7 +357,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
dev_pm_set_driver_flags(&pdev->dev,
DPM_FLAG_SMART_PREPARE |
DPM_FLAG_SMART_SUSPEND |
- DPM_FLAG_LEAVE_SUSPENDED);
+ DPM_FLAG_MAY_SKIP_RESUME);

/* The code below assumes runtime PM to be disabled. */
WARN_ON(pm_runtime_enabled(&pdev->dev));
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 28fd444fb5c9..f545666120d0 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -547,7 +547,7 @@ struct pm_subsys_data {
* NO_DIRECT_COMPLETE: Do not apply direct-complete optimization to the device.
* SMART_PREPARE: Check the return value of the driver's ->prepare callback.
* SMART_SUSPEND: No need to resume the device from runtime suspend.
- * LEAVE_SUSPENDED: Avoid resuming the device during system resume if possible.
+ * MAY_SKIP_RESUME: Avoid resuming the device during system resume if possible.
*
* Setting SMART_PREPARE instructs bus types and PM domains which may want
* system suspend/resume callbacks to be skipped for the device to return 0 from
@@ -562,13 +562,13 @@ struct pm_subsys_data {
* invocations of the ->suspend_late and ->suspend_noirq callbacks provided by
* the driver if they decide to leave the device in runtime suspend.
*
- * Setting LEAVE_SUSPENDED informs the PM core and middle-layer code that the
+ * Setting MAY_SKIP_RESUME informs the PM core and middle-layer code that the
* driver prefers the device to be left in suspend after system resume.
*/
#define DPM_FLAG_NO_DIRECT_COMPLETE BIT(0)
#define DPM_FLAG_SMART_PREPARE BIT(1)
#define DPM_FLAG_SMART_SUSPEND BIT(2)
-#define DPM_FLAG_LEAVE_SUSPENDED BIT(3)
+#define DPM_FLAG_MAY_SKIP_RESUME BIT(3)

struct dev_pm_info {
pm_message_t power_state;
--
2.16.4



\
 
 \ /
  Last update: 2020-04-10 18:02    [W:0.185 / U:1.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site