lkml.org 
[lkml]   [2020]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 31/32] staging: wfx: fix case where AP stop with CAB traffic pending
    Date
    From: Jérôme Pouiller <jerome.pouiller@silabs.com>

    When driver has Content After DTIM Beacon (CAB) in queue, it wait for an
    indication from the firmware. However, when we stop to send beacons,
    this indication may never happen.

    Solve this issue by simply simulate this indication. Firmware will send
    data that probably nobody will heard.

    Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
    ---
    drivers/staging/wfx/sta.c | 15 ++++++++++++++-
    1 file changed, 14 insertions(+), 1 deletion(-)

    diff --git a/drivers/staging/wfx/sta.c b/drivers/staging/wfx/sta.c
    index b1ee02d2f515..2e8d3f571c3e 100644
    --- a/drivers/staging/wfx/sta.c
    +++ b/drivers/staging/wfx/sta.c
    @@ -686,6 +686,19 @@ static void wfx_join_finalize(struct wfx_vif *wvif,
    }
    }

    +void wfx_enable_beacon(struct wfx_vif *wvif, bool enable)
    +{
    + // Driver has Content After DTIM Beacon in queue. Driver is waiting for
    + // a signal from the firmware. Since we are going to stop to send
    + // beacons, this signal will never happens. See also
    + // wfx_suspend_resume_mc()
    + if (!enable && wfx_tx_queues_has_cab(wvif)) {
    + wvif->after_dtim_tx_allowed = true;
    + wfx_bh_request_tx(wvif->wdev);
    + }
    + hif_beacon_transmit(wvif, enable);
    +}
    +
    void wfx_bss_info_changed(struct ieee80211_hw *hw,
    struct ieee80211_vif *vif,
    struct ieee80211_bss_conf *info,
    @@ -724,7 +737,7 @@ void wfx_bss_info_changed(struct ieee80211_hw *hw,

    if (changed & BSS_CHANGED_BEACON_ENABLED &&
    wvif->state != WFX_STATE_IBSS)
    - hif_beacon_transmit(wvif, info->enable_beacon);
    + wfx_enable_beacon(wvif, info->enable_beacon);

    if (changed & BSS_CHANGED_BEACON_INFO)
    hif_set_beacon_wakeup_period(wvif, info->dtim_period,
    --
    2.25.1
    \
     
     \ /
      Last update: 2020-04-01 13:06    [W:2.646 / U:0.076 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site