Messages in this thread | | | Date | Mon, 09 Mar 2020 21:17:42 +0100 | From | Michael Walle <> | Subject | Re: [PATCH 5/6] arm64: dts: ls1028a: Specify the DMA channels for the DSPI controllers |
| |
Am 2020-03-09 20:59, schrieb Vladimir Oltean: > On Mon, 9 Mar 2020 at 21:06, Michael Walle <michael@walle.cc> wrote: >> >> Am 2020-03-09 15:56, schrieb Vladimir Oltean: >> > From: Vladimir Oltean <vladimir.oltean@nxp.com> >> > >> > LS1028A has a functional connection to the eDMA module. Even if the >> > spi-fsl-dspi.c driver is not using DMA for LS1028A now, define the >> > slots >> > in the DMAMUX for connecting the eDMA channels to the 3 DSPI >> > controllers. >> > >> > Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> >> > --- >> > arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 6 ++++++ >> > 1 file changed, 6 insertions(+) >> > >> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi >> > b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi >> > index 515e0a1b934f..18155273a46e 100644 >> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi >> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi >> > @@ -298,6 +298,8 @@ >> > interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; >> > clock-names = "dspi"; >> > clocks = <&clockgen 4 1>; >> > + dmas = <&edma0 0 62>, <&edma0 0 60>; >> > + dma-names = "tx", "rx"; >> >> minor nit. Other nodes specified the dma channels as >> >> dma-names = "tx", "rx"; >> dmas = <&edma0 0 62>, >> <&edma0 0 60>; >> >> -michael >> > > Does it matter?
No, therefore "minor nit". Its just formatted other then everything else in the file.
-michael
| |