lkml.org 
[lkml]   [2020]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 0/9] Add QUSB2 PHY support for SC7180
On Mon 09 Mar 02:53 PDT 2020, Sandeep Maheswaram wrote:

Kishon, let me know if/when you're picking up patch 1-6 and I can pick
the dts patches through the qcom soc tree.

Regards,
Bjorn

> Converting dt binding to yaml.
> Adding compatible for SC7180 in dt bindings.
> Added generic QUSB2 V2 PHY support and using the same SC7180 and SDM845.
>
> Changes in v5:
> *Added the dt bindings which are applicable only to QUSB2 V2 PHY in
> separate block as per comments from Matthias in patch 1/9 and patch 4/9
> and addressed Rob's comment in patch 1/9.
> *Separated the patch for new override params and added a local variable
> to access overrides as per comments from Matthias patch 5/9 and 6/9.
>
> Changes in v4:
> *Addressed Rob Herrings comments in dt bindings.
> *Added new structure for all the overriding tuning params.
> *Removed the sc7180 and sdm845 compatible from driver and added qusb2 v2 phy.
> *Added the qusb2 v2 phy compatible in device tree for sc7180 and sdm845.
>
> Changes in v3:
> *Using the generic phy cfg table for QUSB2 V2 phy.
> *Added support for overriding tuning parameters in QUSB2 V2 PHY
> from device tree.
>
> Changes in v2:
> Sorted the compatible in driver.
> Converted dt binding to yaml.
> Added compatible in yaml.
>
> Sandeep Maheswaram (9):
> dt-bindings: phy: qcom,qusb2: Convert QUSB2 phy bindings to yaml
> dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and
> SC7180
> phy: qcom-qusb2: Add generic QUSB2 V2 PHY support
> dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning
> parameters
> phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2
> V2 PHY
> phy: qcom-qusb2: Add new overriding tuning parameters in QUSB2 V2 PHY
> arm64: dts: qcom: sc7180: Add generic QUSB2 V2 Phy compatible
> arm64: dts: qcom: sdm845: Add generic QUSB2 V2 Phy compatible
> arm64: dts: qcom: sc7180: Update QUSB2 V2 Phy params for SC7180 IDP
> device
>
> .../devicetree/bindings/phy/qcom,qusb2-phy.yaml | 187 +++++++++++++++++++++
> .../devicetree/bindings/phy/qcom-qusb2-phy.txt | 68 --------
> arch/arm64/boot/dts/qcom/sc7180-idp.dts | 6 +-
> arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +-
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 +-
> drivers/phy/qualcomm/phy-qcom-qusb2.c | 144 +++++++++++-----
> 6 files changed, 297 insertions(+), 114 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
> delete mode 100644 Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
>
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>

\
 
 \ /
  Last update: 2020-03-09 20:29    [W:0.143 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site