lkml.org 
[lkml]   [2020]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 05/18] phy: qualcomm: usb: Add SuperSpeed PHY driver
From
Date
Hi,

On 03/03/20 10:41 pm, Bryan O'Donoghue wrote:
> From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
>
> Controls Qualcomm's SS PHY 1.0.0 implemented on various SoCs on both the
> 20nm and 28nm process nodes.
>
> Based on Sriharsha Allenki's <sallenki@codeaurora.org> original code.
>
> [bod: Removed dependency on extcon.
> Switched to gpio-usb-conn to handle VBUS On/Off
> Switched to usb-role-switch to bind gpio-usb-conn to DWC3]
> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
> Cc: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com>
> Cc: Sriharsha Allenki's <sallenki@codeaurora.org>
> Cc: Andy Gross <agross@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Kishon Vijay Abraham I <kishon@ti.com>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: linux-arm-msm@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

I only have 02, 03, and 05 of this patch series. Can you split the
series and send all the patches targeted to PHY tree separately?

Thanks
Kishon

> ---
> drivers/phy/qualcomm/Kconfig | 9 +
> drivers/phy/qualcomm/Makefile | 1 +
> drivers/phy/qualcomm/phy-qcom-usb-ss.c | 246 +++++++++++++++++++++++++
> 3 files changed, 256 insertions(+)
> create mode 100644 drivers/phy/qualcomm/phy-qcom-usb-ss.c
>
> diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
> index 9c56a7216f72..98674ed094d9 100644
> --- a/drivers/phy/qualcomm/Kconfig
> +++ b/drivers/phy/qualcomm/Kconfig
> @@ -102,3 +102,12 @@ config PHY_QCOM_USB_HS_28NM
> High-Speed PHY driver. This driver supports the Hi-Speed PHY which
> is usually paired with either the ChipIdea or Synopsys DWC3 USB
> IPs on MSM SOCs.
> +
> +config PHY_QCOM_USB_SS
> + tristate "Qualcomm USB Super-Speed PHY driver"
> + depends on ARCH_QCOM || COMPILE_TEST
> + depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
> + select GENERIC_PHY
> + help
> + Enable this to support the Super-Speed USB transceiver on various
> + Qualcomm chipsets.
> diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
> index a4dab5329de0..1f14aeacbd70 100644
> --- a/drivers/phy/qualcomm/Makefile
> +++ b/drivers/phy/qualcomm/Makefile
> @@ -11,3 +11,4 @@ obj-$(CONFIG_PHY_QCOM_UFS_20NM) += phy-qcom-ufs-qmp-20nm.o
> obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
> obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
> obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o
> +obj-$(CONFIG_PHY_QCOM_USB_SS) += phy-qcom-usb-ss.o
> diff --git a/drivers/phy/qualcomm/phy-qcom-usb-ss.c b/drivers/phy/qualcomm/phy-qcom-usb-ss.c
> new file mode 100644
> index 000000000000..a3a6d3ce7ea1
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-usb-ss.c
> @@ -0,0 +1,246 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2012-2014,2017 The Linux Foundation. All rights reserved.
> + * Copyright (c) 2018-2020, Linaro Limited
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/reset.h>
> +#include <linux/slab.h>
> +
> +#define PHY_CTRL0 0x6C
> +#define PHY_CTRL1 0x70
> +#define PHY_CTRL2 0x74
> +#define PHY_CTRL4 0x7C
> +
> +/* PHY_CTRL bits */
> +#define REF_PHY_EN BIT(0)
> +#define LANE0_PWR_ON BIT(2)
> +#define SWI_PCS_CLK_SEL BIT(4)
> +#define TST_PWR_DOWN BIT(4)
> +#define PHY_RESET BIT(7)
> +
> +#define NUM_BULK_CLKS 3
> +#define NUM_BULK_REGS 2
> +
> +struct ssphy_priv {
> + void __iomem *base;
> + struct device *dev;
> + struct reset_control *reset_com;
> + struct reset_control *reset_phy;
> + struct regulator_bulk_data regs[NUM_BULK_REGS];
> + struct clk_bulk_data clks[NUM_BULK_CLKS];
> + enum phy_mode mode;
> +};
> +
> +static inline void qcom_ssphy_updatel(void __iomem *addr, u32 mask, u32 val)
> +{
> + writel((readl(addr) & ~mask) | val, addr);
> +}
> +
> +static int qcom_ssphy_do_reset(struct ssphy_priv *priv)
> +{
> + int ret;
> +
> + if (!priv->reset_com) {
> + qcom_ssphy_updatel(priv->base + PHY_CTRL1, PHY_RESET,
> + PHY_RESET);
> + usleep_range(10, 20);
> + qcom_ssphy_updatel(priv->base + PHY_CTRL1, PHY_RESET, 0);
> + } else {
> + ret = reset_control_assert(priv->reset_com);
> + if (ret) {
> + dev_err(priv->dev, "Failed to assert reset com\n");
> + return ret;
> + }
> +
> + ret = reset_control_assert(priv->reset_phy);
> + if (ret) {
> + dev_err(priv->dev, "Failed to assert reset phy\n");
> + return ret;
> + }
> +
> + usleep_range(10, 20);
> +
> + ret = reset_control_deassert(priv->reset_com);
> + if (ret) {
> + dev_err(priv->dev, "Failed to deassert reset com\n");
> + return ret;
> + }
> +
> + ret = reset_control_deassert(priv->reset_phy);
> + if (ret) {
> + dev_err(priv->dev, "Failed to deassert reset phy\n");
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int qcom_ssphy_power_on(struct phy *phy)
> +{
> + struct ssphy_priv *priv = phy_get_drvdata(phy);
> + int ret;
> +
> + ret = regulator_bulk_enable(NUM_BULK_REGS, priv->regs);
> + if (ret)
> + return ret;
> +
> + ret = clk_bulk_prepare_enable(NUM_BULK_CLKS, priv->clks);
> + if (ret)
> + goto err_disable_regulator;
> +
> + ret = qcom_ssphy_do_reset(priv);
> + if (ret)
> + goto err_disable_clock;
> +
> + writeb(SWI_PCS_CLK_SEL, priv->base + PHY_CTRL0);
> + qcom_ssphy_updatel(priv->base + PHY_CTRL4, LANE0_PWR_ON, LANE0_PWR_ON);
> + qcom_ssphy_updatel(priv->base + PHY_CTRL2, REF_PHY_EN, REF_PHY_EN);
> + qcom_ssphy_updatel(priv->base + PHY_CTRL4, TST_PWR_DOWN, 0);
> +
> + return 0;
> +err_disable_clock:
> + clk_bulk_disable_unprepare(NUM_BULK_CLKS, priv->clks);
> +err_disable_regulator:
> + regulator_bulk_disable(NUM_BULK_REGS, priv->regs);
> +
> + return ret;
> +}
> +
> +static int qcom_ssphy_power_off(struct phy *phy)
> +{
> + struct ssphy_priv *priv = phy_get_drvdata(phy);
> +
> + qcom_ssphy_updatel(priv->base + PHY_CTRL4, LANE0_PWR_ON, 0);
> + qcom_ssphy_updatel(priv->base + PHY_CTRL2, REF_PHY_EN, 0);
> + qcom_ssphy_updatel(priv->base + PHY_CTRL4, TST_PWR_DOWN, TST_PWR_DOWN);
> +
> + clk_bulk_disable_unprepare(NUM_BULK_CLKS, priv->clks);
> + regulator_bulk_disable(NUM_BULK_REGS, priv->regs);
> +
> + return 0;
> +}
> +
> +static int qcom_ssphy_init_clock(struct ssphy_priv *priv)
> +{
> + priv->clks[0].id = "ref";
> + priv->clks[1].id = "ahb";
> + priv->clks[2].id = "pipe";
> +
> + return devm_clk_bulk_get(priv->dev, NUM_BULK_CLKS, priv->clks);
> +}
> +
> +static int qcom_ssphy_init_regulator(struct ssphy_priv *priv)
> +{
> + int ret;
> +
> + priv->regs[0].supply = "vdd";
> + priv->regs[1].supply = "vdda1p8";
> + ret = devm_regulator_bulk_get(priv->dev, NUM_BULK_REGS, priv->regs);
> + if (ret) {
> + if (ret != -EPROBE_DEFER)
> + dev_err(priv->dev, "Failed to get regulators\n");
> + return ret;
> + }
> +
> + return ret;
> +}
> +
> +static int qcom_ssphy_init_reset(struct ssphy_priv *priv)
> +{
> + priv->reset_com = devm_reset_control_get_optional_exclusive(priv->dev, "com");
> + if (IS_ERR(priv->reset_com)) {
> + dev_err(priv->dev, "Failed to get reset control com\n");
> + return PTR_ERR(priv->reset_com);
> + }
> +
> + if (priv->reset_com) {
> + /* if reset_com is present, reset_phy is no longer optional */
> + priv->reset_phy = devm_reset_control_get_exclusive(priv->dev, "phy");
> + if (IS_ERR(priv->reset_phy)) {
> + dev_err(priv->dev, "Failed to get reset control phy\n");
> + return PTR_ERR(priv->reset_phy);
> + }
> + }
> +
> + return 0;
> +}
> +
> +static const struct phy_ops qcom_ssphy_ops = {
> + .power_off = qcom_ssphy_power_off,
> + .power_on = qcom_ssphy_power_on,
> + .owner = THIS_MODULE,
> +};
> +
> +static int qcom_ssphy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct phy_provider *provider;
> + struct ssphy_priv *priv;
> + struct phy *phy;
> + int ret;
> +
> + priv = devm_kzalloc(dev, sizeof(struct ssphy_priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->dev = dev;
> + priv->mode = PHY_MODE_INVALID;
> +
> + priv->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(priv->base))
> + return PTR_ERR(priv->base);
> +
> + ret = qcom_ssphy_init_clock(priv);
> + if (ret)
> + return ret;
> +
> + ret = qcom_ssphy_init_reset(priv);
> + if (ret)
> + return ret;
> +
> + ret = qcom_ssphy_init_regulator(priv);
> + if (ret)
> + return ret;
> +
> + phy = devm_phy_create(dev, dev->of_node, &qcom_ssphy_ops);
> + if (IS_ERR(phy)) {
> + dev_err(dev, "Failed to create the SS phy\n");
> + return PTR_ERR(phy);
> + }
> +
> + phy_set_drvdata(phy, priv);
> +
> + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +
> + return PTR_ERR_OR_ZERO(provider);
> +}
> +
> +static const struct of_device_id qcom_ssphy_match[] = {
> + { .compatible = "qcom,usb-ss-28nm-phy", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, qcom_ssphy_match);
> +
> +static struct platform_driver qcom_ssphy_driver = {
> + .probe = qcom_ssphy_probe,
> + .driver = {
> + .name = "qcom-usb-ssphy",
> + .of_match_table = qcom_ssphy_match,
> + },
> +};
> +module_platform_driver(qcom_ssphy_driver);
> +
> +MODULE_DESCRIPTION("Qualcomm SuperSpeed USB PHY driver");
> +MODULE_LICENSE("GPL v2");
>

\
 
 \ /
  Last update: 2020-03-09 11:45    [W:0.149 / U:10.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site