lkml.org 
[lkml]   [2020]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [PATCH v13 4/5] soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches
Hi,

On Mon, Mar 9, 2020 at 2:31 AM Maulik Shah <mkshah@codeaurora.org> wrote:
>
> Add changes to invoke rpmh flush() from within cache_lock when the data in
> cache is dirty.
>
> Introduce two new APIs for this. Clients can use rpmh_start_transaction()
> before any rpmh transaction once done invoke rpmh_end_transaction() which
> internally invokes rpmh_flush() if the caches has become dirty.
>
> Add support to control this with flush_dirty flag.
>
> Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
> Reviewed-by: Srinivas Rao L <lsrao@codeaurora.org>
> ---
> drivers/soc/qcom/rpmh-internal.h | 4 +++
> drivers/soc/qcom/rpmh-rsc.c | 6 +++-
> drivers/soc/qcom/rpmh.c | 64 ++++++++++++++++++++++++++++++++--------
> include/soc/qcom/rpmh.h | 10 +++++++
> 4 files changed, 71 insertions(+), 13 deletions(-)

As mentioned previously but not addressed [3], I believe your series
breaks things if there are zero ACTIVE TCSs and you're using the
immediate-flush solution. Specifically any attempt to set something's
"active" state will clobber the sleep/wake. I believe this is hard to
fix, especially if you want rpmh_write_async() to work properly and
need to be robust to the last man going down while rpmh_write_async()
is running but hasn't finished. My suggestion was to consider it to
be an error at probe time for now.

Actually, though, I'd be super surprised if the "active == 0" case
works anyway. Aside from subtle problems of not handling -EAGAIN (see
another previous message that you didn't respond to [2]), I think
you'll also get failures because you never enable interrupts in
RSC_DRV_IRQ_ENABLE for anything other than the ACTIVE_TCS. Thus
you'll never get interrupts saying when your transactions on the
borrowed "wake" TCS finish.

Speaking of previous emails that you didn't respond to, I think you
still have these action items:

* Document that rpmh_write(active) and rpmh_write_async(active) also
updates wake state. [1]

* Change is_req_valid() to still return true if (sleep == wake), or
keep track of "active" and return true if (sleep != wake || wake !=
active). [1]

* Document that for batch a write to active doesn't update wake. [1]


> diff --git a/drivers/soc/qcom/rpmh-internal.h b/drivers/soc/qcom/rpmh-internal.h
> index 6eec32b..d36be3d 100644
> --- a/drivers/soc/qcom/rpmh-internal.h
> +++ b/drivers/soc/qcom/rpmh-internal.h
> @@ -70,13 +70,17 @@ struct rpmh_request {
> *
> * @cache: the list of cached requests
> * @cache_lock: synchronize access to the cache data
> + * @active_clients: count of rpmh transaction in progress
> * @dirty: was the cache updated since flush
> + * @flush_dirty: if the dirty cache need immediate flush
> * @batch_cache: Cache sleep and wake requests sent as batch
> */
> struct rpmh_ctrlr {
> struct list_head cache;
> spinlock_t cache_lock;
> + u32 active_clients;
> bool dirty;
> + bool flush_dirty;
> struct list_head batch_cache;
> };
>
> diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
> index e278fc1..b6391e1 100644
> --- a/drivers/soc/qcom/rpmh-rsc.c
> +++ b/drivers/soc/qcom/rpmh-rsc.c
> @@ -61,6 +61,8 @@
> #define CMD_STATUS_ISSUED BIT(8)
> #define CMD_STATUS_COMPL BIT(16)
>
> +#define FLUSH_DIRTY 1
> +
> static u32 read_tcs_reg(struct rsc_drv *drv, int reg, int tcs_id, int cmd_id)
> {
> return readl_relaxed(drv->tcs_base + reg + RSC_DRV_TCS_OFFSET * tcs_id +
> @@ -670,13 +672,15 @@ static int rpmh_rsc_probe(struct platform_device *pdev)
> INIT_LIST_HEAD(&drv->client.cache);
> INIT_LIST_HEAD(&drv->client.batch_cache);
>
> + drv->client.flush_dirty = device_get_match_data(&pdev->dev);
> +
> dev_set_drvdata(&pdev->dev, drv);
>
> return devm_of_platform_populate(&pdev->dev);
> }
>
> static const struct of_device_id rpmh_drv_match[] = {
> - { .compatible = "qcom,rpmh-rsc", },
> + { .compatible = "qcom,rpmh-rsc", .data = (void *)FLUSH_DIRTY },

Ick. This is just confusing. IMO better to set
'drv->client.flush_dirty = true' directly in probe with a comment
saying that it could be removed if we had OSI.

...and while you're at it, why not fire off a separate patch (not in
your series) adding the stub to 'include/linux/psci.h'. Then when we
revisit this in a year it'll be there and it'll be super easy to set
the value properly.


> { }
> };
>
> diff --git a/drivers/soc/qcom/rpmh.c b/drivers/soc/qcom/rpmh.c
> index 5bed8f4..9d40209 100644
> --- a/drivers/soc/qcom/rpmh.c
> +++ b/drivers/soc/qcom/rpmh.c
> @@ -297,12 +297,10 @@ static int flush_batch(struct rpmh_ctrlr *ctrlr)
> {
> struct batch_cache_req *req;
> const struct rpmh_request *rpm_msg;
> - unsigned long flags;
> int ret = 0;
> int i;
>
> /* Send Sleep/Wake requests to the controller, expect no response */
> - spin_lock_irqsave(&ctrlr->cache_lock, flags);
> list_for_each_entry(req, &ctrlr->batch_cache, list) {
> for (i = 0; i < req->count; i++) {
> rpm_msg = req->rpm_msgs + i;
> @@ -312,7 +310,6 @@ static int flush_batch(struct rpmh_ctrlr *ctrlr)
> break;
> }
> }
> - spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
>
> return ret;
> }
> @@ -433,16 +430,63 @@ static int send_single(struct rpmh_ctrlr *ctrlr, enum rpmh_state state,
> }
>
> /**
> + * rpmh_start_transaction: Indicates start of rpmh transactions, this
> + * must be ended by invoking rpmh_end_transaction().
> + *
> + * @dev: the device making the request
> + */
> +void rpmh_start_transaction(const struct device *dev)
> +{
> + struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
> + unsigned long flags;
> +
> + if (!ctrlr->flush_dirty)
> + return;
> +
> + spin_lock_irqsave(&ctrlr->cache_lock, flags);
> + ctrlr->active_clients++;

Wouldn't hurt to have something like:

/*
* Detect likely leak; we shouldn't have 1000
* people making in-flight changes at the same time.
*/
WARN_ON(ctrlr->active_clients > 1000)


> + spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
> +}
> +EXPORT_SYMBOL(rpmh_start_transaction);
> +
> +/**
> + * rpmh_end_transaction: Indicates end of rpmh transactions. All dirty data
> + * in cache can be flushed immediately when ctrlr->flush_dirty is set
> + *
> + * @dev: the device making the request
> + *
> + * Return: 0 on success, error number otherwise.
> + */
> +int rpmh_end_transaction(const struct device *dev)
> +{
> + struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
> + unsigned long flags;
> + int ret = 0;
> +
> + if (!ctrlr->flush_dirty)
> + return ret;
> +
> + spin_lock_irqsave(&ctrlr->cache_lock, flags);

WARN_ON(!active_clients);


> +
> + ctrlr->active_clients--;
> + if (ctrlr->dirty && !ctrlr->active_clients)
> + ret = rpmh_flush(ctrlr);

As mentioned previously [2], I don't think it's valid to call
rpmh_flush() with interrupts disabled. Specifically (as of your
previous patch) rpmh_flush now loops if rpmh_rsc_invalidate() returns
-EAGAIN. I believe that the caller needs to enable interrupts for a
little bit before trying again. If the caller doesn't need to enable
interrupts for a little bit before trying again then why was -EAGAIN
even returned? tcs_invalidate() could have just looped itself and all
the code would be much simpler.


> +
> + spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(rpmh_end_transaction);
> +
> +/**
> * rpmh_flush: Flushes the buffered active and sleep sets to TCS
> *
> * @ctrlr: controller making request to flush cached data
> *
> - * Return: -EBUSY if the controller is busy, probably waiting on a response
> - * to a RPMH request sent earlier.
> + * Return: 0 on success, error number otherwise.
> *
> - * This function is always called from the sleep code from the last CPU
> - * that is powering down the entire system. Since no other RPMH API would be
> - * executing at this time, it is safe to run lockless.
> + * This function can either be called from sleep code on the last CPU
> + * (thus no spinlock needed) or with the ctrlr->cache_lock already held.
> */
> int rpmh_flush(struct rpmh_ctrlr *ctrlr)
> {
> @@ -464,10 +508,6 @@ int rpmh_flush(struct rpmh_ctrlr *ctrlr)
> if (ret)
> return ret;
>
> - /*
> - * Nobody else should be calling this function other than system PM,
> - * hence we can run without locks.
> - */
> list_for_each_entry(p, &ctrlr->cache, list) {
> if (!is_req_valid(p)) {
> pr_debug("%s: skipping RPMH req: a:%#x s:%#x w:%#x",
> diff --git a/include/soc/qcom/rpmh.h b/include/soc/qcom/rpmh.h
> index f9ec353..85e1ab2 100644
> --- a/include/soc/qcom/rpmh.h
> +++ b/include/soc/qcom/rpmh.h
> @@ -22,6 +22,10 @@ int rpmh_write_batch(const struct device *dev, enum rpmh_state state,
>
> int rpmh_invalidate(const struct device *dev);
>
> +void rpmh_start_transaction(const struct device *dev);
> +
> +int rpmh_end_transaction(const struct device *dev);
> +
> #else
>
> static inline int rpmh_write(const struct device *dev, enum rpmh_state state,
> @@ -41,6 +45,12 @@ static inline int rpmh_write_batch(const struct device *dev,
> static inline int rpmh_invalidate(const struct device *dev)
> { return -ENODEV; }
>
> +void rpmh_start_transaction(const struct device *dev)
> +{ return -ENODEV; }

Unexpected return from void function.


> +
> +int rpmh_end_transaction(const struct device *dev)
> +{ return -ENODEV; }
> +
> #endif /* CONFIG_QCOM_RPMH */
>
> #endif /* __SOC_QCOM_RPMH_H__ */

[1] https://lore.kernel.org/r/CAD=FV=VzNnRdDN5uPYskJ6kQHq2bAi2ysEqt0=taagdd_qZb-g@mail.gmail.com
[2] https://lore.kernel.org/r/CAD=FV=UYpO2rSOoF-OdZd3jKfSZGKnpQJPoiE5fzH+u1uafS6g@mail.gmail.com
[3] https://lore.kernel.org/r/CAD=FV=VNaqwiti+UB8fLgjF5r2CD2xeF_p7qHS-_yXqf+ZDrBg@mail.gmail.com


-Doug

\
 
 \ /
  Last update: 2020-03-10 00:44    [W:0.144 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site