lkml.org 
[lkml]   [2020]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [EXTERNAL][RFC PATCH v3 07/12] genirq: Shutdown irq chips in suspend/resume during hibernation
On Sat, Mar 07, 2020 at 12:03:52AM +0100, Thomas Gleixner wrote:
> CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you can confirm the sender and know the content is safe.
>
>
>
> Anchal Agarwal <anchalag@amazon.com> writes:
>
> > There are no pm handlers for the legacy devices, so during tear down
> > stale event channel <> IRQ mapping may still remain in the image and
> > resume may fail. To avoid adding much code by implementing handlers for
> > legacy devices, add a new irq_chip flag IRQCHIP_SHUTDOWN_ON_SUSPEND which
> > when enabled on an irq-chip e.g xen-pirq, it will let core suspend/resume
> > irq code to shutdown and restart the active irqs. PM suspend/hibernation
> > code will rely on this.
> > Without this, in PM hibernation, information about the event channel
> > remains in hibernation image, but there is no guarantee that the same
> > event channel numbers are assigned to the devices when restoring the
> > system. This may cause conflict like the following and prevent some
> > devices from being restored correctly.
>
> The above is just an agglomeration of words and acronyms and some of
> these sentences do not even make sense. Anyone who is not aware of event
> channels and whatever XENisms you talk about will be entirely
> confused. Changelogs really need to be understandable for mere mortals
> and there is no space restriction so acronyms can be written out.
>
I don't understand what does not makes sense here. Of course the one you
described is more elaborate and explanatory and I agree I just wrote a short
one from perspective of PM hibernation related to Xen domU.
All I explained was why teardown is needed, what is the solution and
what will happen if we do not clear those mappings.
> Something like this:
>
> Many legacy device drivers do not implement power management (PM)
> functions which means that interrupts requested by these drivers stay
> in active state when the kernel is hibernated.
>
> This does not matter on bare metal and on most hypervisors because the
> interrupt is restored on resume without any noticable side effects as
> it stays connected to the same physical or virtual interrupt line.
>
> The XEN interrupt mechanism is different as it maintains a mapping
> between the Linux interrupt number and a XEN event channel. If the
> interrupt stays active on hibernation this mapping is preserved but
> there is unfortunately no guarantee that on resume the same event
> channels are reassigned to these devices. This can result in event
> channel conflicts which prevent the affected devices from being
> restored correctly.
>
> One way to solve this would be to add the necessary power management
> functions to all affected legacy device drivers, but that's a
> questionable effort which does not provide any benefits on non-XEN
> environments.
>
> The least intrusive and most efficient solution is to provide a
> mechanism which allows the core interrupt code to tear down these
> interrupts on hibernation and bring them back up again on resume. This
> allows the XEN event channel mechanism to assign an arbitrary event
> channel on resume without affecting the functionality of these
> devices.
>
> Fortunately all these device interrupts are handled by a dedicated XEN
> interrupt chip so the chip can be marked that all interrupts connected
> to it are handled this way. This is pretty much in line with the other
> interrupt chip specific quirks, e.g. IRQCHIP_MASK_ON_SUSPEND.
>
> Add a new quirk flag IRQCHIP_SHUTDOWN_ON_SUSPEND and add support for
> it the core interrupt suspend/resume paths.
>
> Hmm?
>
Sure.
> > Signed-off-by: Anchal Agarwal <anchalag@amazon.com>
> > Suggested-by: Thomas Gleixner <tglx@linutronix.de>
>
> Not that I care much, but now that I've written both the patch and the
> changelog you might change that attribution slightly. For completeness
> sake:
>
Why not. That's mandated now :)
> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
>
> Thanks,
>
> tglx
Thanks,
Anchal

\
 
 \ /
  Last update: 2020-03-09 23:38    [W:0.084 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site