lkml.org 
[lkml]   [2020]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 4/6] spi: spi-fsl-dspi: Add support for LS1028A
    Date
    From: Vladimir Oltean <vladimir.oltean@nxp.com>

    This is similar to the DSPI instantiation on LS1028A, except that:
    - The A-011218 erratum has been fixed, so DMA works
    - The endianness is different, which has implications on XSPI mode

    Some benchmarking with the following command:

    spidev_test --device /dev/spidev2.0 --bpw 8 --size 256 --cpha --iter 10000000 --speed 20000000

    shows that in DMA mode, it can achieve around 2400 kbps, and in XSPI
    mode, the same command goes up to 4700 kbps. This is somewhat to be
    expected, since the DMA buffer size is extremely small at 8 bytes, the
    winner becomes whomever can prepare the buffers for transmission
    quicker, and DMA mode has higher overhead there. So XSPI FIFO mode has
    been chosen as the operating mode for this chip.

    Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
    ---
    Changes in v2:
    Switch to DSPI_XSPI_MODE.

    drivers/spi/spi-fsl-dspi.c | 10 ++++++++++
    1 file changed, 10 insertions(+)

    diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
    index 43d2d9fc8b92..cf8a141bbaf2 100644
    --- a/drivers/spi/spi-fsl-dspi.c
    +++ b/drivers/spi/spi-fsl-dspi.c
    @@ -125,6 +125,7 @@ struct fsl_dspi_devtype_data {
    enum {
    LS1021A,
    LS1012A,
    + LS1028A,
    LS1043A,
    LS1046A,
    LS2080A,
    @@ -153,6 +154,12 @@ static const struct fsl_dspi_devtype_data devtype_data[] = {
    .max_clock_factor = 8,
    .fifo_size = 16,
    },
    + [LS1028A] = {
    + .trans_mode = DSPI_XSPI_MODE,
    + .dma_bufsize = 8,
    + .max_clock_factor = 8,
    + .fifo_size = 4,
    + },
    [LS1043A] = {
    /* Has A-011218 DMA erratum */
    .trans_mode = DSPI_XSPI_MODE,
    @@ -1100,6 +1107,9 @@ static const struct of_device_id fsl_dspi_dt_ids[] = {
    }, {
    .compatible = "fsl,ls1012a-dspi",
    .data = &devtype_data[LS1012A],
    + }, {
    + .compatible = "fsl,ls1028a-dspi",
    + .data = &devtype_data[LS1028A],
    }, {
    .compatible = "fsl,ls1043a-dspi",
    .data = &devtype_data[LS1043A],
    --
    2.17.1
    \
     
     \ /
      Last update: 2020-03-09 22:09    [W:4.202 / U:0.016 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site