lkml.org 
[lkml]   [2020]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 0/7] Add clocks for Unisoc's SC9863A
Hi All,

Do you have any comments on this patch-set? I hope this can be
qualified to be merged in next merge window :)

Thanks,
Chunyan

On Wed, 4 Mar 2020 at 15:28, Chunyan Zhang <zhang.lyra@gmail.com> wrote:
>
> From: Chunyan Zhang <chunyan.zhang@unisoc.com>
>
> Add SC9863A specific clock driver and devicetree bindings for it,
> this patch add to support the new way of specifying parents
> without name strings of clocks.
>
> Also this patchset added support gate clock for pll which need to
> wait a certain time for stable after being switched on.
>
> Changes from v5:
> * Addressed comments from Rob:
> - Removed description from "clock-names" and "reg" properties;
> - Added maxItem to "reg" property.
> * Modified the descriptions for those clocks which are a child node of
> a syscon.
>
> Changes from v4:
> * Fixed dt_binding_check warnings.
>
> Changes from v3:
> * Rebased onto v5.6-rc1.
>
> Changes from v2:
> * Addressed comments from Stephen:
> - Remove ununsed header file from sc9863a-clk.c;
> - Added comments for clocks which were marked with CLK_IGNORE_UNUSED,
> and removed some unnecessary CLK_IGNORE_UNUSED;
> - Added error checking for sprd_clk_regmap_init().
>
> * Addressed comments from Rob:
> - Put some clocks under syscon nodes, since these clocks have the same
> physical address base with the syscon;
> - Added clocks maxItems and listed out clock-names.
>
> * Added Rob's reviewed-by on patch 4.
>
> Changes from v1:
> * Addressed comments:
> - Removed redefine things;
> - Switched DT bindings to yaml schema;
> - Added macros for the new way of specifying clk parents;
> - Switched to use the new way of specifying clk parents;
> - Clean CLK_IGNORE_UNUSED flags for some SC9863A clocks;
> - Dropped the module alias;
> - Use device_get_match_data() instead of of_match_node();
>
> * Added Rob's Acked-by on patch 2.
>
> Chunyan Zhang (6):
> dt-bindings: clk: sprd: rename the common file name sprd.txt to SoC
> specific
> dt-bindings: clk: sprd: add bindings for sc9863a clock controller
> clk: sprd: Add dt-bindings include file for SC9863A
> clk: sprd: Add macros for referencing parents without strings
> clk: sprd: support to get regmap from parent node
> clk: sprd: add clocks support for SC9863A
>
> Xiaolong Zhang (1):
> clk: sprd: add gate for pll clocks
>
> .../clock/{sprd.txt => sprd,sc9860-clk.txt} | 2 +-
> .../bindings/clock/sprd,sc9863a-clk.yaml | 105 +
> drivers/clk/sprd/Kconfig | 8 +
> drivers/clk/sprd/Makefile | 1 +
> drivers/clk/sprd/common.c | 10 +-
> drivers/clk/sprd/composite.h | 39 +-
> drivers/clk/sprd/div.h | 20 +-
> drivers/clk/sprd/gate.c | 17 +
> drivers/clk/sprd/gate.h | 120 +-
> drivers/clk/sprd/mux.h | 28 +-
> drivers/clk/sprd/pll.h | 55 +-
> drivers/clk/sprd/sc9863a-clk.c | 1772 +++++++++++++++++
> include/dt-bindings/clock/sprd,sc9863a-clk.h | 334 ++++
> 13 files changed, 2457 insertions(+), 54 deletions(-)
> rename Documentation/devicetree/bindings/clock/{sprd.txt => sprd,sc9860-clk.txt} (98%)
> create mode 100644 Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
> create mode 100644 drivers/clk/sprd/sc9863a-clk.c
> create mode 100644 include/dt-bindings/clock/sprd,sc9863a-clk.h
>
> --
> 2.20.1
>

\
 
 \ /
  Last update: 2020-03-09 02:38    [W:0.093 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site